ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installati
ページ3に含まれる内容の要旨
Content Safety Precautions.............................................................................1 First Setup .........................................................................................2 Quick Installation.............................................................................2-3 Front View of the Product ..................................................................4 Rear View of the Product ...................................................................
ページ4に含まれる内容の要旨
Safety Precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in your residence, con
ページ5に含まれる内容の要旨
First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories: Power Cable D-Sub Cable (15 pin) DVI Cable (24 pin) Audio Cable User’s Guide Quick Start Guide Warranty Documents Quick Installation Installing & Removing the Base Install Remove 2
ページ6に含まれる内容の要旨
Connecting the Monitor 1. Connect Power Cable Connect the power cable to the back of the monitor. Plug the power cable to a nearby power outlet. 2. Connect Analog video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable ( D-Sub cable) to the computer, then to the monitor. 3. Connect DVI cable (Optional) Connect the DVI cable from DVI output of computer to the DVI input of the monitor. 4. Connect audio cable Connect one end of the audio
ページ7に含まれる内容の要旨
Rear View of the Product ➐ ➑ ➒ ➓ ➐ POWER INPUT ➒ DVI INPUT (DVI 24 PIN) ➑ AUDIO INPUT ➓ VGA INPUT (D-SUB 15 PIN) Front View of the Product ➊ ➋ ➌ ➍ ➎ ➏ ➊ OSD TURN ON/OFF ➍ CONFIRM SELECTION ➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF ➌ SCROLL UP/INCREASE ➏ LED INDICATER 4
ページ8に含まれる内容の要旨
Using On Screen Display (OSD) Functions 1 Display main menu. Exit from OSD menu. 2 Auto adjust the image when not in main menu. Confirm the selection. or Select the desired item when in OSD menu. When not in OSD menu, it is to immediately activate Contrast/ Brightness. It should be change to Contrast/ Brightness by pressing button 2. ▼ + ▲ Recall both of Contrast and Brightness. 1 + ▼ Power Lock (when not in OSD menu) 1 + ▲ OSD Lock (when not in OSD menu) Main Menu 5
ページ9に含まれる内容の要旨
OSD Functions Auto Image Adjust : Auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Available in Analog mode only. Contrast : Adjust the foreground white level of screen image. : increase contrast, : decrease contrast. Brightness : Adjust the luminance of the video. : increase brightness, : decrease brightness. Input Select : Select Analog (D-sub) or Digital (DVI) Input Audio Menu : Adjust the audio functions.
ページ10に含まれる内容の要旨
Fine Tune : Adjust the delay time of data and clock. Press ▼ or ▲to adjust to your preference. Sharpness : Adjust the clarity of a non-WXGA (1440x900) signal with ▼ or ▲ button. Setup Menu : Set up Language Select, Resolution Notice, OSD Position, OSD Time Out, and OSD Background. Setup Menu>Language Select : Allow users to choose from available languages. Setup Menu>Resolution Notice: Resolution Notice is to remind the user to set the resolution to 1680x1050 for best ima
ページ11に含まれる内容の要旨
Supported Timing Modes VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 848 x 480 @ 60Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 864 @ 75Hz VESA 1152 x 864 @ 60Hz VESA 1280 x 720 @ 60Hz VESA 1280 x 960 @ 60Hz VESA 1280 x 768 @ 60Hz VESA 1280 x 768 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280
ページ12に含まれる内容の要旨
Technical Information Technical Specification LCD Panel 22” Widescreen TFT ® EPA ENERGY STAR Off Mode: <1W Power Management Displayable Resolution WSXGA 1680 x 1050 max. Vertical Frequency 60Hz max. Input Signal Analog (Dsub) & Digital (DVI) with HDCP Pixel Dimension 0.282 x 0.282 mm LCD Display Color 16.7M Tilt 0°~20° Active Display Area 477.7 mm x 296.1 mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C ®, Compliance cULus, CE, FCC-B, EPA ENERGY STAR ISO13406
ページ13に含まれる内容の要旨
Care and Maintenance Care Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. Put your monitor in a well ventilated area. Do not place any heavy objects on top of your monitor. Make certain your monitor is installed in a clean and moisture-free area. Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Safety Tips If smoke, abnormal noise or odor came out from your monitor,
