ページ1に含まれる内容の要旨
E75
ページ2に含まれる内容の要旨
L170_E.fm Page 2 Tuesday, February 11, 2003 12:51 AM í í í
ページ3に含まれる内容の要旨
First Edition (August 2006) This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. Lenovo may make improvements and/or changes in the product(s) and/or program(s) at any time. It is possible that this publication may contain reference to, or information about, Lenovo products (machines and programs), programming, or services that are not announced in your
ページ4に含まれる内容の要旨
Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual proper
ページ5に含まれる内容の要旨
Trademarks The following terms are trademarks of Lenovo in the United States, other countries,or both: Lenovo Lenovo Microsoft, Windows and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both. or service names may be trademarks or service marks of Other company, product, others. 3
ページ6に含まれる内容の要旨
L170_E.fm Page 26 Tuesday, February 11, 2003 12:51 AM Further Help If you are unable to correct the problem yourself, you may seek further help as follows: Call the Customer Support Center. In the US call 1-800-426-7378 In Canada (Toronto Only) call 416-383-3344 In Canada (all others) call 1-800-565-3344 If possible, stay by your In other countries contact your dealer, retailer, or other Lenovo authorized computer. Your Technical Servicer. Support Representative may wish to go
ページ7に含まれる内容の要旨
Contents Packing list ---------------------------------------------------- 5 Precaution - s ---------------------------------------------------- 6 7 Installation Instructions - ------------------------------------ Swivel base --------------------------------------------------- 7 Power cord ----------------------------------------------------- 8 Video cable ------------------------------------------------------ 8 Operating Instructi on s ---------------------------------------
ページ8に含まれる内容の要旨
PRECAUTIONS Workplace preparation Positioning the monitor Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the monitor. Allow at least 2 in. (50 mm) ventilation space around the monitor. Height The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your
ページ9に含まれる内容の要旨
Rest Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged use of computer workstations can be tiring. Back Sit back in the chair and use the back rest. Hands Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in front of the keyboard to rest your wrists when not typing. Consider using a wristpad. Eyesight Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen
ページ10に含まれる内容の要旨
Power Source: 1. Make sure the power cord is the correct type that is required in your area. 2. This monitor has a universal power supply that allows operation in 100/120V ac or 220/240V ac voltage (No user adjustment is required) 3. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin ac power outlet. The power cord can be connected to either a wall power outlet or the power outlet socket on your computer, depending on the type of powe
ページ11に含まれる内容の要旨
OPERATING INSTRUCTIONS General Instructions The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off. The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord must be connected. • Connect the video cable from the monitor to the video card. • To turn the monitor on, press the POWER switch to ON position. The power indi
ページ12に含まれる内容の要旨
Notes • Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock. • Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. • For maximum protection, repackage your monitor as it was originally packed at the factory. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn s
ページ13に含まれる内容の要旨
ADJUSTING THE PICTURE The description for function control ICONS 1. CONTRAST Adjust the picture contrast. 2. BRIGHTNESS Adjust the picture brightness. H- CENTER Adjust the horizontal position of the picture. 3. 4. H- SIZE Adjust the picture’s horizontal size. 5. V- CENTER Adjust the vertical position of the picture. 6. V- SIZE Adjust the picture’s vertical size. 7. Adjust the picture’s horizontal and vertical size ZOOM simultaneously. 8. PINCUSHION Adjust the pincushion and barrel 9. TRAPEZOID A
ページ14に含まれる内容の要旨
FEATURES Green monitor • The monitor has a power saving function This feature will switch off your monitor to conserve energy, after a user-specified period of inactivity. The power-saving mode is indicated by the light-emitting diode (LED) on the front panel:Properties. Signal Power Mode Cable H-Sync V-Sync Video Indicator Consumption On Attached Yes Yes Active Green ≤ 75 W Stand-by Attached No Yes Blank Orange ≤ 4 W Suspend Attached Yes No Blank Orange ≤ 4 W Off Attached No
ページ15に含まれる内容の要旨
THIS MONITOR WILL DISPLAY THE MESSAGE "NO SIGNAL INPUT OR CABLE DISCONNECTED" IF THERE IS NO VIDEO INPUT SIGNAL OR THE MONITOR CABLE HAS BEEN DISCONNECTED FROM THE PC. This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present.when there is no video input signal present.When there is no video input signal, this monitor, following a time-out period,will automatically switch to an OFF mode. And the LED will turn orange.
ページ16に含まれる内容の要旨
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if the D-15 plug pin of Video Cable is bent *Make sure the Monitor Drivers are installed Picture is fuzzy *Adjust the Contrast and Brightness Controls. Picture bounces or a wave *Move electrica
ページ17に含まれる内容の要旨
APPENDIX A – SPECIFICATIONS CRT Size 43.2 cm (17 in.), 90º deflection, 29mm neck CRT Viewable Image 40.6 cm (16.0 in.), diagonal Size Type 0.25 mm dot pitch. Video 0.7 Vpp, R,G,B Analog Input Separate Sync. TTL Level H./V.- Sync. Positive / Negative Scanning H-Frequency 30 - 72 kHz Frequency V-Frequency 50 - 160 Hz Max. Resolution 1280 x 1024 Video dot rate 108 MHz Factory Preset mode:9 User Programmable mode : 8 Power Source Universal 100 – 240 V ac, 50 Hz / 60 Hz Opera
ページ18に含まれる内容の要旨
Switch • Power Switch/Indicator • OSD MENU • Contrast/ UP Key Down Key • Brightness/ • EXIT Key • Contrast External Controls: Functions • Brightness • H-Center • H-Size • V-Center • V-Size • Zoom • Pincushion • Trapezoid • Pin-Balance • Parallelogram • Rotation • 6500°K • User Color • 9300°K • SRGB • Degauss • Moire Reduce • Recall • Exit • Select Language • OSD Display Time Plug & Play DDC2B ≤75W Power Consumptio n Pre-set Display Area 310 mm (12.20 in.) x 230 mm (9.06 in.) Regulatory
ページ19に含まれる内容の要旨
APPENDIX B – FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY FREQUENCY VGA 720 × 400 31.33kHz 70Hz VGA 640 × 480 31.47kHz 60Hz VESA/85 640 × 480 43.27kHz 85Hz VESA/75 800 × 600 46.88kHz 75Hz VESA/85 800 × 600 53.67kHz 85Hz VESA/75 1024 × 768 60.02kHz 75Hz VESA/85 1024 × 768 68.68kHz 85Hz VESA/60 1280 × 1024 63.98kHz 60Hz VESA/75 1152 × 864 67.50kHz 75Hz Connector pin assignment 15 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION
ページ20に含まれる内容の要旨
Installing the Device Driver Installing the Device Driver for Windows 95 or Windows 98 To install the device driver in Microsoft® Windows®95 or Windows98, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows 95 or Windows 98. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Win
