ページ1に含まれる内容の要旨
ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODELS
E1951S E1951T E2251VR E2251VQ
E2051S E2051T E2351VR E2351VQ
E2251S E2251T
E2351T
www.lg.com
ページ2に含まれる内容の要旨
ENGLISH ENG TABLE OF CONTENTS 2 CONTENTS 26 - HDMI T iming 3 ASSEMBLING AND PREP AR - 26 Indicator ING 3 Unpacking 27 PROPER POSTURE 4 Parts and buttons 6 Setting up the Monitor set 27 Proper posture for using the Monitor set. 6 - Attaching the Stand Base 6 - Detaching the Stand Base 6 - Detaching the Stand Body (Us ing the W all mount) 7 - Mounting on a table 9 - Mounting on a wall 10 USING THE MONIT OR SET 10 Connecting to a PC 10 - D-SUB connection 1
ページ3に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / D-SUB Cable DVI-D Cable Card (This signal cable may be attached (This cable is not included in all to this product before shipping out.) countries.) Power Cord AC-DC Adapt
ページ4に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 4 Parts and buttons Power Indicator y y L i g h t i n g O n : T u r n e d o n y y L i g h t i n g O f f : T u r n e d o f f (Power Button) B u t t o n ( " C U S T O M I Z I N G SETTINGS" on page 13) E2251VR E2251VQ E1951S E2051S E2251S E2351VR E2351VQ DC-IN / HDMI D-SUB DC-IN / DVI-D D-SUB DC-IN / HDMI E1951T E2051T D-SUB E2251T E2351T DC-IN / DC-IN / DVI-D D-SUB DVI-D D-SUB Connection panel (See p.10) DC-IN / DVI-D D-SU
ページ5に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 5 Button Description MENU Accesses the main menus.(See p.14) Left First Button OSD LOCKED/ This function allows you to lock the current control settings, so UNLOCKED that they cannot be inadvertently changed. Press and hold the Left First Button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the Left First Button for several seconds. The message "OSD UNLOCKED" should appear. SUPER+ RESO
ページ6に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 6 D e t a c h i n g t h e S t a n d B a s e Setting up the Monitor set Place the Monitor set with the screen side 1 Attaching the Stand Base down on a flat and cushioned surface. Place the Monitor set with the screen side 1 2 T urn the screw to the left, and then pull out the down on a flat and cushioned surface. Stand Base from the Stand Body . CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damag
ページ7に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 7 Remove 4 screws and pull out the Stand Body 2 2 Connect the AC-DC Adapter and Power Cord f rom the Monitor set. to a wall outlet. DC-IN / DC-IN / 3 Press Power button on the front swit ch of panel to turn the power on. Mounting on a table CAUTION Lift and tilt the Monitor set into its upright 1 position on a table. D i s c o n n e c t t h e p o w e r c o r d f i r s t , a n d t h e n m o v e Leave a 10 cm (minimum) space
ページ8に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 8 manual supplied with the Kensington security WARNING system or visit http://www.kensington.com. When you adjust the angle, do not hold the Connect the Kensington security system cable bottom of the Monitor set frame as shown on between the Monitor set and a table. the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. NOTE The Kensington security system is optional. You can ob
ページ9に含まれる内容の要旨
ENGLISH ENG ASSEMBLING AND PREPARING 9 If you intend to mount the Monitor set to a wall, CAUTION attach Wall mounting interface (optional parts) to the back of the set. y yDisconnect the power cord first, and then When you install the Monitor set using the wall move or install the Monitor set. Otherwise mounting interface (optional parts), attach it electric shock may occur. carefully so it will not drop. yyIf you install the Monitor set on a ceiling or Please, Use the screw and wall mou
ページ10に含まれる内容の要旨
ENGLISH ENG USING THE MONITOR SET 10 USING THE MONIT OR SET Connecting to a PC E2251VR E2351VR E2251VQ E2351VQ Y our Monitor set supports Plug & Play*. y y *Plug & Play: A PC recognizes a connected HDMI device that users connect to a PC and turn DC-IN / on, without device configuration or user intervention. DVI-D D-SUB D-SUB connection T ransmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in
ページ11に含まれる内容の要旨
ENGLISH ENG USING THE MONITOR SET 11 DVI-D connection CAUTION T ransmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with y y Connect the signal a DVI cable as shown in the following illustrations. input cable and tighten it by turning the screws clockwise. E1951T E2051T E2251T E2351T y y Do not press the screen with your finger for a long time as this may result in temporary DC-IN / DVI-D D-SUB distortion on the screen. y y A void displ
ページ12に含まれる内容の要旨
ENGLISH ENG USING THE MONITOR SET 12 Self Image Setting Function HDMI connection Press the power button on the front panel to turn T ransmits the digital video and audio signals from the power on. When monitor power is turned on, your PC or A/V to the Monitor set. Connect the PC the "Self Image Setting" Function is executed or A/V and the Monitor set with the HDMI cable as automatically . (Only supported in Analog Mode) shown in the following illustrations. E2251VR E2351VR E2251VQ E2
ページ13に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 13 CUST OMIZING SETTINGS Accessing The Main Menus Press any button on the front of the Monitor set to display the MONIT OR SETUP OSD menu. 1 Press the desired menu item . 2 3 Change the v alue of the menu item by pressing the buttons o n the front of the Monitor set. T o return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. 4 Monitor set B uttons MENU (See p. 14 ) AUT O (See p. 5 ) EXIT Se
ページ14に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 14 Customizing Settings Menu Settings MENU BRIGHTNESS 100 Press any button on the front of the Monitor set to display the 1 ORIGINAL RATIO WIDE MONIT OR SETUP OSD menu. PRESET COLOR TEMP WARM PRESET Press the MENU button to display the options in t he OSD 2 50 RED menu. 50 GREEN BLUE 50 3 Set the options by pressing th e ◄ or ► or ▼ buttons. 70 CONTRAST BLACK LEVEL LOW Select EXIT to leave the OSD menu. 4 LANGUAGE ENGLISH T o return to the upper m
ページ15に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 15 SUPER ENERGY SA VING Settings SUPER ENERGY SAVING Press any button on the front of the Monitor set to 1 display the MONIT OR SETUP OSD menu. ON OFF RESET 2 Press the MENU button to display the options in t he OSD Menu. SUPER SAVING TOTAL POWER REDUCTION: 20 W : 5 W/h Select SUPER ENERGY SA VING by pressing the LED SAVING TOTAL CO2 REDUCTION: 16 g 3 : 12 W/h ▼ button. Enter to SUPER ENERGY SA VING by pressin
ページ16に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 16 SUPER+ RESOLUTION SUPER+ RESOLUTION Settings 1 Press any button on the front of the Monitor set to display the MONIT OR SETUP OSD menu. NORMAL LOW MEDIUM HIGH Press the SUPER+ RESOLUTION button to display 2 the options in the OSD menu. EXIT Set the options by pressing ◄ or ► buttons. 3 4 Select EXIT to leave the OSD menu. T o return to the upper menu or set other menu items, OK EXIT use the up arrow ( ) button. The available SUPER+ RESOLUTION
ページ17に含まれる内容の要旨
ENGLISH ENG CUSTOMIZING SETTINGS 17 DUAL PACKAGE DUAL MONITOR ► DUAL MONIT OR Settings 1 Press any button on the front of the Monitor set to display the MONIT OR SETUP OSD menu. Press the DUAL button to display the options in the OSD menu. 2 OFF EXTENDED CLONE Set the options by pressing ▼ and then ◄ and ► buttons. 3 EXIT 4 Select EXIT to leave the OSD menu. T o return to the upper menu or set other menu items, use the up arrow ( ) button . The available DUAL MONIT OR se
ページ18に含まれる内容の要旨
ENGLISH ENG TROUBLESHOOTING 18 TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display y Check and see if the power cord is connected properly to the power connected? outlet. Is the power indicator light on? y Press the Power button. Is the power indicator blinking? y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y Try to turn on the PC. Do you see an "OUT OF RA
ページ19に含まれる内容の要旨
ENGLISH ENG TROUBLESHOOTING 19 Display image is incorrect The screen color is mono or y Check if the signal cable is properly connected and use a screwdriver abnormal. to fasten if necessary . y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings . The screen blinks. y Check if the screen is set to interlace mode and if yes, change it to t he recommend resolution. Do you see an "Un
ページ20に含まれる内容の要旨
ENGLISH ENG SPECIFICATIONS 20 SPECIFICA TIONS E1951S E1951T Display Screen T ype 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 47.0 cm Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic) V ertical Frequency 56Hz to 75Hz (Automatic) Input Form E1951S Separate Sync. E1951T Separate Sync. Digital V ideo Input Signal Input E1951S 15 pin D-SUB Connector E1951T 15 pin D-SUB Connector /DVI-D Connector
