ページ1に含まれる内容の要旨
Manual
file:///D|/My%20documents/dfu/B2C_TV_NAFTA/ENGLISH/170T4/MANUAL.HTM6/30/2004 11:36:24 AM
ページ2に含まれる内容の要旨
Safety and Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer m
ページ3に含まれる内容の要旨
Safety and Troubleshooting Consult a service technician if the monitor does not operate normally when the operating instructions given in this manual have been followed. RETURN TO TOP OF THE PAGE Installation Locations ● Avoid exposure to heat and extreme cold ● Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold. ● Avoid moving the product between locations with large temperature differences. Choose a site that falls within the followi
ページ4に含まれる内容の要旨
About This Manual About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes the features, setup, operation and other important information. It includes the following sections: ● Safety and Troubleshooting Information provides tips and solutions for common problems as well as other related information you may need. ● About This Electronic User's Manual gives an over
ページ5に含まれる内容の要旨
About This Manual Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the pot
ページ6に含まれる内容の要旨
Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features 170T4 ● 17-inch WXGA LCD all-in-one Monitor TV with excellent display performance ● Multiple video input allowing display of PC, TV, VCD, DVD and CamCorder ● MultiSystem TV tuner-PAL/NTSC (available in most of the Asia P
ページ7に含まれる内容の要旨
Product Information • Vertical refresh rate 56Hz-76Hz • Horizontal frequency 30kHz-63kHz PC VIDEO • Video dot rate 103 MHz • Input impedance - Video 75 ohm - Sync 2K ohm • Input signal levels 0.7 Vpp • Sync input signal Separate sync • Sync polarities Positive and negative WXGA Hsync 48- 60 kHz, Vsync 60 - 75 Hz (N.I.) XGA Hsync 48- 60 kHz, Vsync 60 - 75 Hz (N.I.) SVGA Hsync 37- 47 kHz, Vsync 60 - 75 Hz (N.I.) • Input Frequency VGA Hsync 31- 38 kHz, Vsync 60 - 75 Hz (N.I
ページ8に含まれる内容の要旨
Product Information x: 0.283 y: 0.297 (at 9300° K) • White Chromaticity x: 0.313 y: 0.329 (at 6500° K) x: 0.313 y: 0.329 (sRGB) Upper >85° (typ.) Lower >85° (typ.) • Viewing Angle (C/R >5) Left >85° (typ.) Right >85° (typ.) • Response time <=25ms (typ.) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes 1280 x 768 at 75Hz • Maximum • Recommended 1280 x 768 at 60Hz 14 user definable modes 9 factory preset modes: file:///D|/My%20documents/df
ページ9に含まれる内容の要旨
Product Information Resolution Mode H. freq (kHz) V. freq (Hz) PC 640*480 VGA VESA 60 31.469 59.940 640*480 VGA VESA 75 37.500 75.000 720*400 IBM VGA 3H 31.468 70.087 800*600 SVGA VESA 60 37.879 60.317 800*600 SVGA VESA 75 46.875 75.000 1024*768 XGA VESA 60 48.363 60.004 1024*768 XGA VESA 75 60.023 75.029 1280*768 WXGA VESA 60 47.700 60.000 1280*768 WXGA VESA 75 60.100 75.000 Video Video 60Hz 15.734 59.940 Video 50Hz 15.625 50.000 RETURN TO TOP OF THE PAGE Automatic Power Saving If you hav
ページ10に含まれる内容の要旨
Product Information Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color ON Active Yes Yes 55W (typ.) Green 110VAC < 1W OFF Blanked No No Amber 230VAC < 2W ® ® This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has ® determined that this product meets the ENERGY STAR guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 517 x 364 x 199 mm (incl. Pedestal) • Weight 5.4 kg • Tilt (Fo
ページ11に含まれる内容の要旨
Product Information Pin Assignment The 15-pin D-sub connector (male) of the signal cable: Pin Pin Assignment Assignment No. No. Red video input DDC +5V 1 9 2 Green video input 10 Logic ground 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 Ground 13 H. Sync Red video ground V. Sync 6 14 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Fron
ページ12に含まれる内容の要旨
Product Information RETURN TO TOP OF THE PAGE Physical Function Tilt RETURN TO TOP OF THE PAGE file:///D|/My%20documents/dfu/B2C_TV_NAFTA/ENGLISH/170T4/product/product.htm (7 of 7)6/30/2004 11:36:39 AM
ページ13に含まれる内容の要旨
Installing your LCD Monitor/TV Installing your LCD Monitor/TV Front View Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • VESA Mounting and Easy Wall Mounting • Installing the Optional TV/AV Module • Getting Started • Optimising Performance Front View Product Description SOURCE 1 TV/Video source selection Increase or decrease the channel number 2 or up or down the highlighted function in OSD file:///D|/My%20documents/dfu/B2C_TV_NAFTA/ENGLISH/170T4/install/install
ページ14に含まれる内容の要旨
Installing your LCD Monitor/TV 3 MENU Open the OSD and select the highlighted function Increase or decrease the level of audio volume 4 VOL or move up or down the highlighted function in OSD 5 Power indicator 6 Power switch On/Off 7 Receiver for 'remote control' RETURN TO TOP OF THE PAGE Rear View DC power in 1 DC in D-Sub input 2 VGA 3 PC - Audio in For connect to PC Audio output file:///D|/My%20documents/dfu/B2C_TV_NAFTA/ENGLISH/170T4/install/install.htm (2 of 3)6/30/2004 11:36:42 AM
ページ15に含まれる内容の要旨
Installing your LCD Monitor/TV RETURN TO TOP OF THE PAGE Optimizing Performance ● For best performance, ensure that your display settings are set at 1280x768@60Hz (for 17"). Note: You can check the current display settings by pressing the 'MENU' button once. ● You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This is included on this CD. Step-by-step instructions are provided to guide you through the ins
ページ16に含まれる内容の要旨
On-Screen Display On-Screen Display Description of the On-Screen Display • The OSD Guide Description of the On Screen Display What is the On-Screen Display? This is a feature offered by all Philips LCD monitors/TVs. It allows an end user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor. Basic and simple instruction on the control keys When you press the button
ページ17に含まれる内容の要旨
On-Screen Display Europe OSD Guide PC Mode INPUT SELECT Select video source for main display: ● PC VGA input PC ● Antenna or cable TV input TV ● CVBS Composite Video input AV ● S-video input S-VIDEO ● Progressive video input & YPbPr component video input HD-YPbPr LANGUAGE Set language for OSD ENGLISH DEUTSCH ITALIANO Adjust positions to get optimum display location on the ADJUST POSITION screen HORIZONTAL VERTICAL VIDEO MODE FULL SCREEN file:///D|/My%20documents/dfu/B2C
ページ18に含まれる内容の要旨
On-Screen Display ASPECT RATIO 4:3 Adjust brightness and contrast to obtain optimum BRIGHTNESS & CONTRAST display BRIGHTNESS CONTRAST Adjust phase and clock to obtain stable and clear VIDEO NOISE display PHASE CLOCK ADJUST COLOR Set color temperature to suit personal preference ORIGINAL PANEL COLOR 9300K FOR CAD/ CAM 6500K FOR IMAGE MANAGEMENT SRGB RED USER PRESET GREEN BLUE RESET TO FACTORY SETTINGS Reset the setting to default values NO YES Automatic adjustment of the display pa
ページ19に含まれる内容の要旨
On-Screen Display RETURN TO TOP OF THE PAGE TV/Video/HD Mode INPUT SELECT Select video source for main display: ● PC VGA input PC ● Antenna or cable TV input TV ● CVBS Composite Video input AV ● S-video input S-VIDEO ● Progressive video input & YPbPr component video input HD-YPbPr PICTURE Adjust picture characteristics to suit personal preference BRIGHTNESS CONTRAST COLOR SHARPNESS ● Normal ● Cool COLOR TEMP ● Warm EXIT SOUND Adjust audio characteristics to s
ページ20に含まれる内容の要旨
On-Screen Display BASS BALANCE SURROUND (ON/ OFF) EXIT LANGUAGE Set language for OSD ENGLISH DEUTSCH ITALIANO INSTALL Install a TV program list (only available in "TV mode") Specify the TV system at the user location: SYSTEM ● WEST EUR (PAL B/G) ● FRANCE Scan and store the TV programs at the user location AUTO STORE automatically. ● Search ● Prog. No ● Fine tune ● Store ● Exit MANUAL STORE Fine tune and store the TV programmes at the user location manually Set the
