FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
ページ3に含まれる内容の要旨
Important Notice 1. Do not place heavy objects on the top of the ELX4-60. 2. ELX4 -60 is for indoor use. It is not weatherproof. Use ELX4-60 with referring to its environmental specifications (Temperature & Humidity). To clean the ELX4-60, gently wipe the outside with a clean dry cloth. 3. Be sure to use a DC adapter that is provided by Rugged CCTV Connecting ELX4-60 directly to an AC current will cause electric damages to ELX4-60. 4. Be careful not to drop the ELX4 -60. Physi
ELX4 -60 TABLE OF CONTENTS 7.1.3. Setting at Alarm Rec. menu ......................................................................................................62 7.1.4. Setting at Normal Rec. menu ...................................................................................................63 7.2. Using Keyboard......................................................................................................................................64 7.2.1. Setting at Serial Setup’s RS23
ページ7に含まれる内容の要旨
OVERVIEW ELX4 -60 OVERIVEW 1. Introduction What is ELX4-60? ELX4-60 supports 4 analog video channels and 12 IP video channels simultaneously. Video, Audio, and Text Event-Logs are digitized and stored on two internal hard-drives. Using a ‘Proprietary Wavelet Algorithm,’ average file size is 1-5KB while still maintaining clarity high enough for facial-recognition. In addition, Wavelet -compressed images are impossible to manipulate. Due to our proprietary Wavelet Algorithm, the
ページ8に含まれる内容の要旨
ELX4-60 OVERVIEW Key features - Expandable up to 16 channels (4 analog video channels + 12 IP video channels) - 1 channel audio recording & playback - Recording, Playback, Back -up images and Networking at the same time (Quadplex) - Total 120 ips recording speed (Analogue video 60ips + IP video 60ips) - Total 120 ips display speed (Max 60ips over Network) - Displaying live and recorded images on PC as well as CCTV Monitor - Built-in hardware Quad Splitter for analog video - Buil
ページ9に含まれる内容の要旨
OVERVIEW ELX4 -60 2. Product Description 2.1. Front Panel (3) LED (1) Remote (2) Channel (4) Function (5) Direction/Replay Controller Receiver Selection Button selection button Button (1) Remote Controller Receiver (2) Channel Selection Button - To select video input channel in monitoring and playback mode (3) LED - PWR : Displays power status. When lit, power is supplied. - NET : Displays the status of Ethernet connection and rate of communication. When blinking, data
ページ10に含まれる内容の要旨
ELX4-60 OVERVIEW (5) Direction/Replaying Button - MENU : To set PTZ and access Configuration menu. - ENTER : To enter and confirm the selected menu. - HELP : To change the image information display (Date, Transfer speed, etc). - EXIT/LOCK : To exit form the selected menu or lock current screen. - Arrow key : Replay function or to move inside the Configuration menu. 2.2. Rear Panel (6) Power (2) Audio port (5) Ethernet (1) Serial Port (3) Video (4) Video & DIO Output Inp
ページ11に含まれる内容の要旨
OVERVIEW ELX4 -60 2.3. Installation Summary - Connect Camera - Connect Monitor - Connect Ethernet. (This is optional to view image on remote location or to add IP channel to ELX4-60 ) - Connect Audio - Connect Power & Run Rugged CCTV 2003.05.21 (v 1.0) 11
ページ12に含まれる内容の要旨
ELX4 -60 BASIC CONFIGURATION Basic Configuration 3. Monitoring Once power is supplied to ELX4 -60, default quad-split monitoring mode (analog channels 1~4) will be displayed. Th e following steps apply for all ELX4 -60’s monitoring menus.
ページ13に含まれる内容の要旨
BASIC CONFIGURATION ELX4 -60 3.4. Viewing all channels with sequence mode - All channels can be viewed in successive order automatically using the [SEQ] button. - Press the [MENU] button on the front panel to set-up the sequential cycle. (The default value is 3 seconds per channel for display.) - Select “Monitor” tab of Configuration menu. - Move to “Configuration” below “Monitor” using the down arrow button on ELX4-60 front panel. - Press the [ENTER] button to enter the menu. - Selec
ページ14に含まれる内容の要旨
ELX4 -60 BASIC CONFIGURATION 3.5. Viewing an alarm triggered channel - When an alarm is triggered, the related channel will pop-up full screen automatically. - Set ‘Alarm Pop-up Screen’ function to “On” in “Configuration” under the “Monitor” tab , and set the display duration in “Pop-up Hold (sec)” - If more than one channel is triggered by an alarm, the related channels will be displayed simultaneously in a split -screen. In order to move current screen, press any button. 3.6. Viewi
ページ15に含まれる内容の要旨
BASIC CONFIGURATION ELX4 -60 Pan/Tilt Control To control Pan and Tilt during live image monitoring mode. - Press the [SELECT] button. Move the “Select” icon to the desired channel. - Press the [MENU] button. - Select ‘Pan/Tilt ’ from the PTZ Menu. - Control pan and tilt function using the up, down, left and right arrows. Zoom/Focus Control To control Zoom and Focus during live image monitoring mode. - Press the [SELECT] button. Move the “Select” icon to the desired channel. -
ページ16に含まれる内容の要旨
ELX4 -60 BASIC CONFIGURATION 3.8. Using Relay - To set relay on/off. (ELX4 -60 supports four relay outputs.) - Press the [SEARCH/RELAY] button. - The icon of “Relay On” shows. - Press the relay number button between 1 and 4, and then the related relay out signal will be transmitted. - In order to set relay off, press the [SEARCH/RELAY] button again. - Then “Relay On ” shows because relay keeps being set as on. - Press the [SEARCH/RELAY] button again, and then the icon of “Relay Off”
ページ17に含まれる内容の要旨
BASIC CONFIGURATION ELX4 -60 4.1.2. Playback via split screen - Press the [MULTI] button during basic (single-channel) playback mode. - Channels 1 to 4 will be displayed in the quad-split screen. - To display a single channel, press the corresponding number button on the front of the ELX4 -60. 4.1.3. Playback with Digital Zoom - Press the [ZOOM] button during the basic (single-channel) playback mode. - Digital Zoom will expand the image to twice its normal size. th - Default locatio
ページ18に含まれる内容の要旨
ELX4 -60 BASIC CONFIGURATION 4.2. Using Search Mode Search Mode is used to search and play specific data directly during playback mode. Data can be searched by specific Time and Date or by the Event Log browser. Button control - Press the [SEARCH] button during playback mode. - Search for data by entering Date/Time or by selecting an event from the Event Log browser. - Press the [ENTER] button after entering the desired Date/Time or selecting Event from log. - The selected ima
ページ19に含まれる内容の要旨
BASIC CONFIGURATION ELX4 -60 4.3. Copy / Backup / Delete Data Manager To copy/backup/delete the recorded data. This menu is activated during playback mode. - Press the [SELECT] button and [MENU] button in Playback mode. 4.3.1. Copy Image To copy a specific data with USB memory stick. Seconds To des ignate copy range between 1 and 60 seconds. Select Disk Select copy disk. Rugged CCTV 2003.05.21 (v 1.0) 19
ページ20に含まれる内容の要旨
ELX4 -60 BASIC CONFIGURATION 4.3.2. Backup Manager Start Date & Time / End Date & Time To designate backup range. Select Disk To select which storage will be used as backup device. To change the disk status, use the “Disk Manager” menu under the “System” tab. Backup Manager does not support USB devices. Backup Manager will ONLY work with devices connected through IEEE1394 / FireWire ports. 20 2003.05.21 (v 1.0) Rugged CCTV
