ページ1に含まれる内容の要旨
READ AND SAVE THIS INSTRUCTION MANUAL
SUNPENTOW N
Air Cooler
Model SF-608R
Contents
Functions
1. Cooling, humidifying and air
Parts Name
purifying
Product Appearance
2. Adopted photo-catalysis
Control Panel
technology,
Important Safety Notes
Anti-bacterial water tank and
Operation
germ-free water curtain cycle
Specifications
system
Circuit Diagram
3. Three fan air speeds with Sleep
Maintenance
Mode functio
ページ2に含まれる内容の要旨
Parts’ Name 1. Product Appearance Front view Rear view Top lid Ice box Control panel Screw Handle Cool air outlet Filter net Ice & Water Inlet Power line Water tank Castor Water outlet Water volume index 2. Control Panel 4 H M L Sleep 0.5 1 2 SWING SPEED (Hours) Important Safety Notes 1. Make sure the correct power (120V/60 Hz) is supplied. 2. To avoid electric shock or personal injury, do not operate any appliance with a damaged cord or plug or after the appliance
ページ3に含まれる内容の要旨
7. Close supervision is necessary when any appliance is used by or near children. 8. When unplugging, pull from the plug and not on the cord. 9. Turn off the unit when adding water. 10. Turn off and unplug unit before cleaning. 11. To avoid excessive dampness, do not use the Humidifying function for an extended period of time in an area with poor circulation. 12. When not planning to use the unit for a long period of time, please unplug the power cord, drain water, and store in a cool, d
ページ4に含まれる内容の要旨
o While operating in Cool Air / Humidifying mode, when the water tank reaches half point, the unit will beep to warn you that the water tank is half empty. The red indicator light remains on and the unit continuous running. o To prevent damage to the water pump, when operating the unit without water, please keep the Cool Air / Humidifying function OFF. The unit will operate as a normal electric fan. 6. WATER FILLING INSTRUCTIONS o Please be sure the power is OFF before filling water. o Fi
ページ5に含まれる内容の要旨
3. Rinse with clean water. 4. Replace the photo-catalysis filter and insert filter back in place. o Do not take off the rear panel o Do not wet the photo-catalysis filter (fig.3), insolate it in the sun (fig.4). Troubleshooting Problem Reasons Solution Power is not turned on Turn on power Timer fulfilled Switch off Timer mode Not blowing air Unit is broken/defective Contact Sunpentown "On/Off" button not pressed Press the “ On/Off” button Unit will not
