ページ1に含まれる内容の要旨
Dear Sceptre Customer,
Congratulations on your new SCEPTRE X23 LCD monitor purchase. Thank you
for your support. To ensure safety and many years of trouble free operation of
your LCD monitor, please read the manual carefully before making any
adjustments, and keep them in a safe place for future reference. We hope you
enjoy your new SCEPTRE X23 LCD monitor.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at monitor
ページ2に含まれる内容の要旨
Important Information Page2 SCEPTRE X23
ページ3に含まれる内容の要旨
Tips and Safety Precautions THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe pl
ページ4に含まれる内容の要旨
• The X23 LCD MONITOR is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. • Do not overload power strips and extension cords. Overloading can result in fire or electric
ページ5に含まれる内容の要旨
Table of Contents Important Information ......................................................................................................................... 2 Tips and Safety Precautions ............................................................................................................... 3 Table of Contents ............................................................................................................................... 5 Opening the Package...................
ページ6に含まれる内容の要旨
Opening the Package The SCEPTRE X23 is packaged in a carton together with standard accessories. The weight of the LCD display is approximately 15.2 lbs. Since the LCD panel can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding. When opening the carton, make sure the product is in good condition and that all the standard accessories and items are included. After unpac
ページ7に含まれる内容の要旨
Installing the Base 1. Please place the base on a flat surface (i.e. table). 2. Hold the monitor directly 90 degrees above the base. SCEPTRE X23 Page7
ページ8に含まれる内容の要旨
3. Connect the monitor to the base by inserting the monitor into the base. QUICK START The following are short steps to connect and use the monitor with your PC under Microsoft Windows. 1. After you have installed the base, connect your VGA cord to both the monitor and PC and turn on the PC and the monitor. 2. Under windows, use your mouse to right click on the background with nothing selected. Left click on the PROPERTIES option. 3. Click on the SETTINGS tab.
ページ9に含まれる内容の要旨
Mounting Preparations 1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. 2. Start removing the base by putting pressure to the top buckle until it releases. SCEPTRE X23 Page9
ページ10に含まれる内容の要旨
3. Keep the top buckle released while putting pressure to the lower buckle until it releases as well. Please take the stand off when both buckles are released. 4. Once the base comes off, please remove the label sticker that covers the screws you need to remove. Page10 SCEPTRE X23
ページ11に含まれる内容の要旨
5. Unscrew the 4 screws that lock the arm to the monitor. 6. Once the 4 screws are removed, slide the arm off the monitor and the monitor will be ready for mounting. SCEPTRE X23 Page11
ページ12に含まれる内容の要旨
Identifying Front and Rear Panel Front View POWER INDICATOR : If light is blue, the monitor is turned on. If the light is blinking red, the monitor is turned on but not receiving a signal from the computer. If the light is solid red, the power cord is plugged in but the monitor is not turned on. If the light is off, the power cord is not connected and no power is provided to the display panel. NATIVE RESOLUTION : This monitor’s clearest picture is p
ページ13に含まれる内容の要旨
Side View Control Buttons and Hotkey Functions POWER – This button turns the monitor ON or OFF. AUTO ADJUST – This button automatically adjusts the screen, making words clearer and pictures centered. While in the OSD, this button acts as an exit key to get out of the current menu. MENU – This button opens the On Screen Display (OSD) Menu. While in the OSD, this button also acts as the ENTER button and goes into the function you want to adjust. While adjustin
ページ14に含まれる内容の要旨
Side View Tilt Angle The LCD Monitor’s angle settings range from 0° to 10°. o o 0 to 10 Page14 SCEPTRE X23
ページ15に含まれる内容の要旨
Rear View Mounting Specification : 100mm x 100mm using screw size M4. Length of screw should not exceed 10mm. SCEPTRE X23 Page15
ページ16に含まれる内容の要旨
Rear View Connections The following descriptions are from left to right. DVI – DVI stands for Digital Video Interface. This connection is for computers to send video signals to the monitor digitally so that colors and video are more accurate and vivid. This port supports video input; however this DVI connection does NOT support HDCP. If you have a HDCP video device, do NOT connect the device to this port. VGA – VGA stands for Video Graphics Array. This connect
ページ17に含まれる内容の要旨
Understanding Your Cables & Connections Corresponding Connection Cable Name Cable Picture Picture DVI (digital video) (No HDCP) VGA (analog video) 3.5 mm Mini-jack Cable Name Cable Picture VGA to Female Component YPbPr (optional accessory) 3.5mm Mini-jack to Female RCA Audio (optional accessory) SCEPTRE X23 Page17
ページ18に含まれる内容の要旨
Connecting the LCD to Your PC If You Have DVI Connection on Your Video Card… 1. Make sure the power of X23 LCD MONITOR is turned off. 2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other end of the cable to your X23 LCD MONITOR. 3. Obtain the Audio In cable and connect the 3.5 mm Mini-jack cable to the Audio In connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your PC’s audio line out co
ページ19に含まれる内容の要旨
If You Have VGA Connection on Your Video Card… 1. Make sure the power of X23 LCD MONITOR is turned off. 2. If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the X23 LCD MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES optio
ページ20に含まれる内容の要旨
Connecting the LCD to Your Video Device If You Have Component Connection on Your DVD Player… 1. Make sure the power of X23 LCD MONITOR is turned off. 2. If you have component connection on your DVD player, purchase a VGA to female component video conversion cable and connect the component end to regular component cables and regular component cables to the DVD player. Connect the VGA end to the X23 LCD monitor. Make sure you match the colors on the componen
