ページ1に含まれる内容の要旨
Installation and Operating Instructions
Ceramic Glass Hob
C61RAAST / C61RABAL / C61RACN / C61RADST
To avoid the risk of accidents or damage to the hob, read all instructions before installing or
using the appliance. Keep this manual for future reference.
C61RAAST_XSA-00045A-01_EN.indd 1 2008-04-21 ｿﾀﾈﾄ 5:04:04
ページ2に含まれる内容の要旨
C61RAAST_XSA-00045A-01_EN.indd 2 2008-04-21 ｿﾀﾈﾄ 5:04:04
ページ3に含まれる内容の要旨
Contents EN Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Using This Manual Please take the time to read this owner’s manual, paying particular attention to the safety EN information contained in the following section, before using your appliance. Keep this manual for future reference. If transferring ownership of the appliance, please remember to pass the manual on to the new owner. The following symbols are used in the text This is the safety alert symbol. Warning indicates information concerning your personal safety. Important indicates inf
ページ5に含まれる内容の要旨
Safety The safety aspects of this appliance comply with accepted technical standards and EN the German Appliance Safety Law. However, as manufacturers we also believe it is our responsibility to familiarise you with the following safety instructions. Electrical safety • Be sure the appliance is properly installed and grounded by a qualified technician. • The appliance should be serviced only by qualifi ed service personnel. Repairs carried out by unqualified individuals may cause injury or ser
ページ6に含まれる内容の要旨
Safety (continued) Safety during use EN • This appliance is to be used only for normal cooking and frying in the home. It is not de- signed for commercial or industrial use. • Never use the hob for heating the room. • Take care when plugging electrical appliances into mains sockets near the hob. Mains leads must not come into contact with the cooktop. • Overheated fat and oil can catch fire quickly. Never leave surface units unattended when preparing foods in fat or oil, for example, when co
ページ7に含まれる内容の要旨
Installing the Hob Important: Be sure the new appliance is installed and grounded only by qualified EN personnel. Please observe this instruction. The warranty will not cover any damage that may occur as a result of improper installation. Technical data is provided at the end of this manual. Regulations and compliance This appliance meets the following standards: • EN 60 335 - 1 and EN 60 335 - 2 - 6, relating to the safety of electrical appliances for house- hold use and similar purposes
ページ8に含まれる内容の要旨
Installing the Hob (Continued) Connecting to the mains power supply EN Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob. Shut off power to circuit before connecting wires to circuit. The heating element voltage is AC230 V~. The appliance also works perfectly on older networks with AC220 V~. The hob is to be connected to the
ページ9に含まれる内容の要旨
Installing the Hob (Continued) Installing into the countertop EN Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer ac- cessible after installation, as it is on the original rating plate on the underside of the appliance. Pay special attention to the minimum space and clearance requirements. Secure the brackets at both sides with the provided screws before mounting the hob
ページ10に含まれる内容の要旨
Installing the Hob (Continued) Model : C61RABAL, C61RACN, C61RADST EN 90 x4 2 100 = 100 +1 = 490 8 C61RAAST_XSA-00045A-01_EN.indd 8 2008-04-21 ｿﾀﾈﾄ 5:04:42
ページ11に含まれる内容の要旨
Installing the Hob (Continued) Model : C61RAAST EN 90 x4 2 100 = 100 +1 = 490 9 C61RAAST_XSA-00045A-01_EN.indd 9 2008-04-21 ｿﾀﾈﾄ 5:04:59
ページ12に含まれる内容の要旨
148 mm 148 mm Parts and Features Cooking zones and control panel EN Single cooking zone 1950W Single cooking zone 1300 W Single cooking zone Control panel 1300 W Single cooking zone 1950W Indicators for heat settings and residual heat “Lock” control sensor Heat setting selectors “On/Off” control sensor 10 C61RAAST_XSA-00045A-01_EN.indd 10 2008-04-21 ｿﾀﾈﾄ 5:05:16 183 mm 183 mm
ページ13に含まれる内容の要旨
Parts and Features (Continued) Components EN Ceramic Glass Hob Installation Brackets 1 2 Screws Scraper 3 4 11 C61RAAST_XSA-00045A-01_EN.indd 11 2008-04-21 ｿﾀﾈﾄ 5:05:16
ページ14に含まれる内容の要旨
Parts and Features (Continued) The key features of your appliance EN • Ceramic glass cooking surface: The appliance has a ceramic glass cooking surface and four rapid - response cooking zones. The hob’s powerful radiant heater elements significantly shorten the amount of time required for the zones to heat up. • Touch control sensors: Your appliance is operated using touch control sensors. • Easy cleaning: The advantage of the ceramic glass cooking surface and the control sensors is their ac
ページ15に含まれる内容の要旨
Parts and Features (Continued) Safety shutoff EN If one of the cooking zones is not switched off or the heat setting is not adjusted after an ex- tended period of time, that particular cooking zone will automatically switch itself off. Any residual warmth will be indicated with (for “hot”) in the digital displays corresponding to the particular cooking zones. The cooking zones switch themselves off at the following times. Cooking setting 1 - 2 After 6 hours Cooking setting 3 - 4 After 5 hours
ページ16に含まれる内容の要旨
Before You Begin Initial cleaning EN Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner. Important: Do not use caustic or abrasive cleaners. The surface could be damaged. Hob Use Using suitable cookware Better pans produce better results. • Y ou can recognise good pans by their bases. The base should be as thick and flat as pos- sible. • When buying new pans, pay particular attention to the diameter of the base. Manufactur- ers often give only the diameter of the
ページ17に含まれる内容の要旨
Hob Use (Continued) • Always position pots and pans before switching on the cooking zone. EN • Dirty cooking zones and pan bases increase power consumption. • When possible, position the lids firmly on the pots and pans to cover completely. • Switch the cooking zones off before the end of the cooking time to use the residual heat for keeping foods warm or for thawing. • The base of the pan should be the same size as the cooking zone. • Using a pressure cooker reduces cooking times by up to 50 %
ページ18に含まれる内容の要旨
Hob Use (Continued) Switching the appliance on EN Touch the “Lock ” sensor for approximately 3 seconds. The appliance is switched on using the “On / Off ” control sensor. Touch the “On / Off ” sensor. The digital displays will show . After the “On / Off ” sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons. Temperature control For setting and adjusting the po
ページ19に含まれる内容の要旨
Hob Use (Continued) Switching the appliance off EN To completely switch off the appliance, use the “On / Off ” control sensor. Touch the “On / Off ” sensor. After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an (for “hot”). If the heat setting is at and you want to turn the burner off, the sensor can be touched one additional time, and the hea
ページ20に含まれる内容の要旨
Hob Use (Continued) Using the child safety lock EN You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface. The lock control sensor can be used only when the power is on. Switching the child safety lock on 1. Touch the control sensor for approximately 3 seconds. An acoustic signal will sound as confirmation. approx. 3 sec. 2. Touch any heat setting control sensor . will appear in the displays, indicating the child s
