ページ1に含まれる内容の要旨
66301K-MN
Ceramic glass hob
Table de cuisson vitrocéramique
Glaskeramische kookplaat
Installation and Operating Instructions
Instructions de montage et mode d’emploi
Montage- en gebruiksaanwijzing
ページ2に含まれる内容の要旨
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control panel layout . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Operating Instructions 1 Safety instructions 3 Please comply with these instructions. If you do not, any damage re- sulting is not covered by the warranty. 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Correct use This appliance should be used only for normal domestic cooking and frying of food
ページ5に含まれる内容の要旨
Safety during use Overheated fats and oils can ignite quickly. When cooking with fat or oil (e.g. chips) do not leave the appliance unattended. There is the risk of burns from the appliance if used carelessly. Remove stickers and film from the glass ceramic. Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. Switch the cooking zones off after each use. Safety when cleaning For cleaning, the appliance must be switched off and cooled do
ページ6に含まれる内容の要旨
Description of the Appliance Cooking surface layout Single cooking zone Multi-purpose zone 1200W 1500/2400W Triple cooking zone Control panel Single cooking zone 800/1600/2300W 1200W Control panel layout Cooking zone indicators STOP+GO Heat setting selection Timer function with pilot light Display Timer display Outside/middle ring Outside ring Timer Multi-purpose On/Off On/Off zone pilot light On/Off Triple ring pilot light with power indicator 6
ページ7に含まれる内容の要旨
Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off To switch the appliance on and off Increase settings To increase heat settings Reduce settings To reduce heat settings TIMER Timer Timer selection Increase settings To increase Timer time Reduce se
ページ8に含まれる内容の要旨
Displays Display Description ¾ Cooking zone is switched off u Keep warm setting Keep warm setting/STOP+GO function is set ¿ - Ç Heat settings Heat setting is set 2 - 6 Heating setting plus Intermediate heat setting is set decimal point a Automatic warm up Automatic warm-up function is function activated e Fault Malfunction has occurred h Residual heat Cooking zone is still hot l Child safety device Lock/child safety device is en- gaged _ Safety cut-out Safety cut-out has been activated
ページ9に含まれる内容の要旨
Operating the appliance Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds ¾ / h lights up Switch off Touch for 1 second h / none goes out 3 After switching on, within approx. 10 seconds a heat setting or a func- tion must be set, otherwise the appliance automatically switches itself off. Setting the heat setting Control panel Indicator To increase Touch u to Ç To decrease Touch Ç to ¾ To switch off Touch and at the same time ¾ 3 The k
ページ10に含まれる内容の要旨
Switching the outside ring on and off By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware. 3 Before an outside ring can be switched on, the inside ring must be switched on. Triple cooking zone Sensor panel Power indicator To switch on middle ring Touch for 1-2 seconds. One power indicator is lit. Two power indicators are To switch on outside ring Touch for 1-2 seconds. lit. Second power indicator To switch off outside ring
ページ11に含まれる内容の要旨
Using the automatic warm-up function All cooking zones are equpped with an automatic warm up function When setting a heat setting using , when starting from ¾, the cook- ing zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set. Control possible Display panel heat set- tings Switch on Touch ¿ to Æ a (after 5 sec- (only when starting at onds) ¾) Switch off Touch Æ to ¿ / u Æ to u Not used Touch Ç to u Ç to u 3 If during the auto
ページ12に含まれる内容の要旨
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel Display/Signal 1. Switch on the appliance ¾ (Do not set a heat setting) 2. Touch until the signal Acoustic signal sounds 3. Touch l Appliance switches off. The child safety device is engaged. Releasing the child safety device Step Control panel Display/Signal 1. Switch on the appliance l 2. Touch until the signal Acoustic signal sounds 3. To
ページ13に含まれる内容の要旨
Using the timer Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes 3 If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. 3 If a cooking zone is switched off, the timer function set is also switched off. Selecting a cooking zone Step Cont
ページ14に含まれる内容の要旨
Setting the time Step Control panel Indicator 1. Select TIMER cooking Pilot light for the cooking zone se- zone lected flashes 2. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Indicator 1. Select TIMER cooking Pilot light of cooking zone selected zone flashes faster Time remaining is displayed 2. Touch The time remaining counts backwards to 00. The pilot light go
ページ15に含まれる内容の要旨
Displaying the time remaining for a cooking zone Step Control panel field Display 1. TIMER Select cooking Pilot light of the cooking zone select- zone ed flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step Control panel field Acoustic signal 1. Touch TIMER Acoustic signal to acknowledge. Acoustic signal stops. 15
ページ16に含まれる内容の要旨
Safety cut-out Cooking surface If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface auto- matically switches itself off. If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automati- cally switches itself off after approx.
ページ17に含まれる内容の要旨
Tips on Cooking and Frying 3 Information on acrylamides According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. Cookware You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible. Cookware made of enamelled steel or with alumini
ページ18に含まれる内容の要旨
Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking- Cooking set- suitable for Tips/Hints process time ting 0 Off position Keeping Keeping cooked foods V food as required Cover warm warm Hollandaise sauce, Melting melting butter, chocolate, 5-25 mins. Stir occasionally gelatine 1-2 Solidi- Fluffy omelettes, baked 10-40 mins. Cook with lid on fying eggs Simmering rice and milk- Add at least twice as Simmer- based dishes much liqui
ページ19に含まれる内容の要旨
Cleaning and Care 1 Take care! Risk of burns from residual heat. 1 Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1. Place a scrap
ページ20に含まれる内容の要旨
What to do if… Problem Possible cause Remedy The cooking zones will not More than 10 seconds have Switch the appliance on switch on or are not func- passed since the appliance again. tioning was switched on The child safety device is Deactivate the child safety switched on l device (See the section “Child safety device”) Several sensor fields were Only touch one sensor field touched at the same time Safety cut-out has been Remove any objects (pan, triggered cloths, etc.) that are lying on t
