ページ1に含まれる内容の要旨
Epson Stylus CX7000F Series
Epson Stylus CX7000F Series Parts Accessories
Media
Paper support
extension
Part
Paper support Paper name Size number
Epson Ultra Premium Photo Paper Borderless S041934
Feeder guard
Glossy 4 x 6 inches
Epson Ultra Premium Glossy Photo
Left edge
Letter S041935
Paper
guide
(8.5 x 11 inches)
Epson Premium Photo Paper Glossy Borderless S041808
Epson Premium Glossy Photo Paper 4 x 6 inches S041727
Memory
Borderless S041464
card cover
5 x 7 inches
USB connector
(camer
ページ2に含まれる内容の要旨
Epson Stylus CX7000F Series Envelopes Specifications Size No. 10 (4.1× 9.5 inches) Printing Paper type Plain bond paper Weight 20 to 24 lb (75 to 90 g/m²) Printing method On-demand ink jet Nozzle configuration Black: 90 nozzles Note: Color: 270 nozzles Poor quality paper may reduce the print quality and cause paper jams or other problems. If you have print quality problems, switch to a (90 each cartridge: cyan, magenta, higher grade paper. yellow) Do not load curled or folded paper. Print dir
ページ3に含まれる内容の要旨
Epson Stylus CX7000F Series Scanning USB Interface Scanner type Flatbed color Standard Based on Universal Serial Bus Specifications Revision 2.0 Photoelectric device CIS Bit rate 480 Mbps (high speed device) Effective pixels 10,200 × 14,040 pixels at 1200 dpi Adaptable connector USB Series B Document size 8.5 × 11.7 inches (216 × 297 mm) A4 or US letter size Cable length Less than 6.6 feet (2 meters) Scanning resolution 1200 dpi (main scan) Safety Approvals ™ 2400 dpi with Micro Step Drive (sub
ページ4に含まれる内容の要旨
Epson Stylus CX7000F Series Memory Stick/ Compatible with Memory Stick 3. Flip the feeder guard forward. MemoryStick PRO Standard version 1.42-00 or Memory card slot Stick Standard Memory Stick PRO Format Specifications version 1.02-00 cards SD/MMC Compatible with SD Memory Card card slot Specifications / PART1. Physical Layer Specification Version 2.0 cards and 4. Insert the paper, printable side up, against the right edge MultiMediaCard Standard Version 4.1 guide and beneath the tabs. (The pr
ページ5に含まれる内容の要旨
Epson Stylus CX7000F Series 6. Flip the feeder guard back. Selecting the Correct Media Type Setting The table below lists the settings you should choose for your paper in the printer software: Type or Media Type Paper setting Plain paper Plain Paper / Epson Bright White Paper Bright White Paper Follow these guidelines when loading paper: Epson Premium Bright White Paper ❏ Don’t load paper above the arrow on the left edge guide. Epson Ultra Premium Photo Paper Glossy Ultra Premium Photo Make
ページ6に含まれる内容の要旨
Epson Stylus CX7000F Series 2. Close the document cover gently so that your original does Copying a Document not move. 1. Press the P On button to turn 12:00 PM Y on the CX7000F Series. You see a screen like this: 2. Place the document on the glass as described on page 5. Be sure to close the document cover. 3. Load up to 100 sheets of letter-size plain paper. See page 4 for details. 4. Press the Copy button. You see Copies:1 100% this display: 5. If you want your copies automatic
ページ7に含まれる内容の要旨
Epson Stylus CX7000F Series 5. If you want borderless photos Making a Quick Copy (printed without a white If you want to make a copy quickly and do not need high border), press the Copy button quality, you can print a “draft” copy. The print quality is again to select Fit to Page reduced, but the copy is printed faster. mode. (If you select 100%, photos are printed with a 1. Load plain, letter-size paper and select Plain Paper and border.) The display changes to Copies:1 FitPage Lette
ページ8に含まれる内容の要旨
Epson Stylus CX7000F Series 4. If the light in the Memory Slot Type of card Card button is not lit, press Right slot CompactFlash the Memory Card button. Microdrive The CX7000F Series counts Number of images (varies) Left slot SD the images on your card and SDHC you see this display, indicating miniSD* 1.Img:92 Prt Idx miniSDHC* it is ready to print the index microSD* sheet: microSDHC* MultiMediaCard 5. Make sure Plain Paper and Letter are selected. Memory Stick Memory Stick Duo* 6. Press
ページ9に含まれる内容の要旨
Epson Stylus CX7000F Series 2. Place the index sheet face-down on the glass, in the upper Printing All Photos or DPOF Photos left corner, so that the top of the sheet is aligned against the Follow the steps below to print one copy of each photo on the left edge of the glass. card or to print only those photos that were pre-selected with your camera’s DPOF (Digital Print Order Format) feature. 1. Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time (see page 4 fo
ページ10に含まれる内容の要旨
Epson Stylus CX7000F Series 5. Press the paper size button to select Letter, 4"x 6", or Setting Up Your Fax Features 5"x 7". 6. Connect the USB cable that came with your camera to the Before sending or receiving faxes, you may want to create a fax camera and the USB connector on the front of your header and select your fax preferences. CX7000F Series. Creating Header Information 1. Press the Fax button once to enter Fax mode. The Fax button lights up and you see Enter Fax Number this dis
ページ11に含まれる内容の要旨
Epson Stylus CX7000F Series 12. Press the keys on the numeric keypad to enter the time in a Setting and Options Description 12-hour format. You can enter the numbers 0 to 9. DRD Indicates the type of answer ring pattern All (default) you want to use to receive faxes. You 13. Press the x Start Color/OK 1:AM 2:PM Single must have set up your phone system to button. You see this display: Double use different ring patterns to select an Triple option other than All. 14. Press the 1 key on the n
ページ12に含まれる内容の要旨
Epson Stylus CX7000F Series 8. If you need to change the Dial If you want to redial the last fax number you used, press the Mode, DRD, ECM, V.34, or Redial/Pause button instead of entering a fax number. The Rings to Answer settings, last fax number appears on the screen. press the u or d button, or 3. To send a black and white fax, press the x Start B&W press the 5 key on the numeric button. 5.Communication keypad, to display this option: To send a color fax, press the x Start Color/OK butt
ページ13に含まれる内容の要旨
Epson Stylus CX7000F Series Selecting the Answer Mode Scanning Directly From Epson Scan The CX7000F Series tells you You can scan from any TWAIN-compliant application—such 12:00 PM Y ™ whether Auto Answer is as ArcSoft PhotoImpression —using Epson Scan. Or you can turned on or not on the first start Epson Scan directly from your computer and save your Y: Auto Answer is turned on screen: image to a file. 12:00 PM N 1. Open the document cover and place your original face- To change
ページ14に含まれる内容の要旨
Epson Stylus CX7000F Series 5. You see the File Save Settings window: 4. Select the basic settings for the type of original(s) you are scanning, then select the destination setting for the way you will use your image(s) (see the on-screen User’s Guide for instructions). 5. Click the Preview button to preview your image(s), then select your scan area. 6. Do one of the following to select the Color Restoration option: ❏ Home Mode: Click the Color Restoration checkbox. Choose the location whe
ページ15に含まれる内容の要旨
Epson Stylus CX7000F Series Note: 5. Press the x Start Color/OK button. The CX7000F Series If you don’t see any improvement after cleaning the print head four prints a test pattern like this: times, turn off the CX7000F Series and wait at least six hours. This lets any dried ink soften. Then try cleaning the print head again. If Print head quality still does not improve, one of the ink cartridges may be old or nozzles are clean: damaged and needs to be replaced. Tip: Print head needs If y
ページ16に含まれる内容の要旨
Epson Stylus CX7000F Series Note: 6. Open the cartridge cover. You’ll also see a low ink or cartridge replacement message on your computer screen when you print from your computer. If a cartridge is more than six months old, print quality may decline. If necessary, try cleaning the print head (see page 15). If printouts still do not look their best, you may need to replace the cartridge. Removing and Installing Ink Cartridges Note: Leave the expended cartridge installed until you have obtaine
ページ17に含まれる内容の要旨
Epson Stylus CX7000F Series Caution: 14. Press the x Start Color/OK button. The CX7000F Series If you do not remove the yellow tape before installing the ink begins charging ink and Charging appears on the display. cartridge, print quality may decline or you may not be able to print. Do not remove any other seals from the cartridges. . Start Color OK 10. Place the new ink cartridge into the cartridge holder and Charging takes about one minute. When it’s finished, push it down until it cli
ページ18に含まれる内容の要旨
Epson Stylus CX7000F Series 4. Follow the instructions on the screen to print a vertical 8. Click Print to print a color horizontal alignment sheet. alignment sheet. You see a window like this one: After it’s printed, you see a window like this one: 9. Look at the printout and find the pattern with no gap or 5. Look at the five sets of patterns in your printout. For each line between the rectangles and enter its number in the box set, if you see a pattern with no visible vertical lines, ente
ページ19に含まれる内容の要旨
Epson Stylus CX7000F Series 6. Close the scanner section, push in the output tray extension, Display message Cause and solution and close the output tray. Memory card data does The index sheet does not match the not match index sheet. photos on the memory card. Remove the 7. Repack the CX7000F Series in the original box using the Replace the card or index card and insert the one used to print the protective materials that came with it. sheet and try again. index sheet (see page 7), or place
