ページ1に含まれる内容の要旨
Introduction
Before recording
Settings and
Digital Camera
adjustments
for recording
Digitale Kamera
Caméra numérique
Basic operations
INSTRUCTIONS
KY-F70B
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
Various
recording
methods
Menu screen
settings
Connecting
to a PC
Illustration with optional lens attachment.
Others
For Customer Use:
Enter below the Serial No. which is
located on the unit. Retain this
information for future reference.
This instruction book is made from 100%
Model No. KY-F70B
recycl
ページ2に含まれる内容の要旨
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6. Do not use this appliance near water - for example, near a batht
ページ3に含まれる内容の要旨
13. Follow all warnings and instructions marked on the appliance. 14. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 15. Never push objects of any kind into his appliance through cabinet slots as they mat touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. 16. Do not attempt to service this appliance yourself as opening or removing covers may expose you to
ページ4に含まれる内容の要旨
JVC Sales Office 1. JVC PROFESSIONAL PRODUCTS (U.K.) LIMITED ULLSWATER HOUSE, KENDAL AVENUE LONDON, W3 0XA, UNITED KINGDOM TEL : 020 8896 6000 2. JVC PROFESSIONAL PRODUCTS GMBH GRÜENER WEG 12, 61169 FRIEDBERG / HESSEN GERMANY TEL : (06031)6050 3. JVC PROFESSIONAL PRODUCTS ITALIA S.p.A. VIA MARIO PANNUNZIO 4, 20156 MILANO, ITALY TEL : (02)38.05.01 4. JVC FRANCE S.A. 1, AVENUE EIFFEL 78422 CARRIERES-SUR-SEINE, CEDEX FRANCE TEL : 33.1.61.04.11.64. 5. JVC ESPAÑA S.A. CTRA GRACIA MANRESA,KM 14 750 ED
ページ5に含まれる内容の要旨
10. JVC DENMARK A/S HELGESHOJ ALLE 30 DK-2630, TASTRUP, DENMARK TEL : (43)509000 11. SPITZER ELECTRONIC AG MUHLEMATTSTRASSE 13, 4104 OBERWIL, SWITZERLAND TEL : 0614051111 12. OY HEDPRO AB LAUTTASAARENTIE 50, FIN-00200 HELSINKI, FINLAND TEL : 35896828244 13. ELECTROINDUSTRIAL HELLAS S.A. 62, PIRAEUS AVE, 183 46 MOSCHATO, ATHENS, GREECE TEL : (01)4832855 14. ORIELA S.A. CAMPO STA. CLARA 160-A, 1100 LISBOA PORTUGAL TEL : 351-1-882-3382 15. FACO HF FAXAFEN 12, P.O.BOX 442, 108 108 REYKAJVIK, ICELAND
ページ6に含まれる内容の要旨
Thank you for purchasing the JVC KY-F70B The instructions are given in three languages: Digital Camera. English from page E2 to E72 These instructions are for KY-F70BU. German from page G2 to G72 French from page F2 to F72 SAFETY PRECAUTIONS Changes or modifications not approved by JVC could FOR USA AND CANADA void the user’s authority to operate the equipment. CAUTION WARNING: RISK OF ELECTRIC SHOCK TO REDUCE THE RISK OF FIRE OR ELEC- DO NOT OPEN TRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RA
ページ7に含まれる内容の要旨
For Sweden For Denmark VARNING ADVARSELI Explosionsfara vid felaktigt batteribyte. Lithiumbatteri – Eksplosionsfare ved fejlagtig Använd samma batterityp eller en ekvivalent typ håndtering. som rekommenderas av apparattillverkaren. Udskiftning må kun ske med batteri af samme Kassera använt batteri enligt fabrikantens fabrikat og type. instruktion. Lever det brugte batteri tilbage til leverandøren. For Finland For Norway ADVARSEL VAROITUS Lithiumbatteri – Eksplosjonsfare. Paristo voi räjähtää, jo
ページ8に含まれる内容の要旨
Table of Contents 1. Introduction Features ...........................................................................................................................6 Accessories and attachments ..........................................................................................6 Cautionary notes for the correct usage of this product ....................................................7 Part names and their functions ........................................................................
ページ9に含まれる内容の要旨
Outputting images from the memory to a printer ...........................................................39 Clearing images from the memory (PLAY/FREEZE menu screen)................................40 Clearing images from the memory (REC menu screen) ................................................41 5. Various recording methods Recording a PC monitor .................................................................................................42 Outputting negative images ...................
ページ10に含まれる内容の要旨
5 2 0 1. Introduction Features ● This digital camera uses three 1.45 million pixel 1/2 inch 3-CCD. ● Newly developed 1/2 inch C mount Dichroic prism for the colour separation prism. ● The semi-animation of 1360 × 1024 pixels can be output with analog signal (7.5 frames/sec- ond) and the still picture of 1360 × 1024 pixels can be captured. ● Image capturing capability using a capture board since video signals are processed in real- time by the built-in DSP and outputted as RGB analog signals of 7
ページ11に含まれる内容の要旨
Cautionary notes for the correct usage of this product • Before recording an important event, etc., always check to make sure that this product is working properly. • We are not liable for any missed recordings caused by malfunction of this unit, etc. Phenomena unique to CCD • Smearing and blooming When using CCD to record a bright light source, a smearing effect may occur running a white line vertical to the light source. In addition, a blooming effect may also occur when the light source is
ページ12に含まれる内容の要旨
C-MOUNT DIGITAL CAMERA KY-F70B 1. Introduction (continued) Part names and their functions [Front and bottom] Lens mount Screw holes for mounting the Although the lens mount conforms to the camera (1/4-inch) type C mount lens, there are restrictions Used when mounting the camera to a fixer on the lenses that can be used. or rotating platform. Mounting the lens ( page 17) Lithium battery compartment Camera mounting bracket Used to compartment the lithium battery Although the mo
ページ13に含まれる内容の要旨
[Rear] ● While the menu screen is being dis- played, press this button selected item up. While an item is selected, use this but- SCSI REC ton to change the set value. SEND AW/SEL MODE Menu screen flow ( page 46) MENU UP DOWN SET PLAY FREEZE
AW/SEL/DOWN button ● [AW (Auto White)] LENS MONITOR Press this button to adjust the white bal- ance when the light source of the sub- REMOTE DC IN ject is changed. POWER ON 1 2 3 4 White balance adjustment ( page 30) ● [SEL (Select)] SEE INSTRUCTION MA
ページ14に含まれる内容の要旨
1. Introduction (continued) Part names and their functions (continued) [Rear (continued)] Ventilation hole SCSI REC MODE SEND AW/SEL MENU UP DOWN SET PLAY FREEZE LENS MONITOR REMOTE DC IN POWER ON 1 2 3 4 SEE INSTRUCTION MANUAL MODE/SET button REC display lamp ● [MODE] This lamp lights when in the REC* mode. Pressing this button each time will switch During FREEZE, this display lamp will flash. between the REC (record)* and PLAY * During the REC mode, camera images (playback) modes. are outp
ページ15に含まれる内容の要旨
FREEZE button POWER display lamp While in the REC mode, press this button This lamp lights when the power of the main to capture a still image (freeze) of the im- unit is on. ages being outputted through the MONI- DC IN power input terminal TOR terminal. At the same time, the still (Mini DIN 8-pin, female) image is saved to the main unit memory. Main unit power supply (DC 12V) is sup- Pressing this button once more will cancel plied through this terminal. the still image and return to the
ページ16に含まれる内容の要旨
1. Introduction (continued) Pin configurations of connectors Power terminal (Mini DIN 8-pin, female) Remote terminal (Metal 10-pin, female) 8 1 7 7 2 8 6 10 9 3 5 6 3 5 4 4 2 1 Pin no. Signal name 1 A. WHITE L active Zi=22k Ω Pin no. Signal name 2 FREEZE L active Zi=100k Ω 1NC 3 WEN L active Zo=22 Ω 3.3V(p-p) 2 GND 4 FLASH 3NC 5 SEND 4NC 6 RS-SDI 5 GND 7 RS-SDO 8 GND 6 12V 9 12V 7NC 10 OPERATION 8 12V CAUTION • Consult your JVC dealer concerning the re- mote terminal connection. Lens terminal (M
ページ17に含まれる内容の要旨
Monitor terminal (D-sub 15-pin, female) SCSI terminal (Half-pitch 50-pin, female) 5 1 25 1 10 6 50 26 15 11 Pin no. Signal name Pin no. Signal name 1 ~ 11 GND 1 R OUT 700mV(p-p), 75 Ω 12 GND 2 G OUT 700mV , 75 Ω (p-p) 13 NC 3 B OUT 700mV , 75 Ω (p-p) 14 GND 4NC 15 ~ 25 GND 5NC 26 DB 0 6 R GND 27 DB 1 7 G GND 28 DB 2 8 B GND 29 DB 3 9NC 30 DB 4 10 GND 31 DB 5 11 GND 32 DB 6 12 NC 33 DB 7 34 DBP 13 Hs (3.3V(p-p) negative polarity 35 GND Zo=22 Ω ) 36 GND 14 Vs (3.3V(p-p) negative polarity 37 GND Zo
ページ18に含まれる内容の要旨
2. Before recording Basic system 1 While checking the images from the camera on the monitor, output the images to an MO disk, ® Zip disk or printer. Connect to the AA-P700 power supply AC ADAPTER AA-P700 POWER ON Connect the PC monitor (VGA) ( page 18) AC OFF ( page 19) AC adapter MONITOR VIDEO IN SCSI DC IN VGA monitor ® Connect the MO/Zip drive ( page 20) MO drive ® or Zip drive Microscope CP700DSA MITSUBISHI PAPER FEED & CUT COPY ONLINE adapter ALARM SHEET PAPER DATA Connect the printer
ページ19に含まれる内容の要旨
Basic system 2 This is a system to record with this camera using a flash timed by an external freeze switch. MEMO Use the following setting for flash connection: IRIS MODE: MANUAL ( page 50) WHITE BAL: MANUAL ( page 53) ABL: Set in MASTER BLACK ( page 56, 57) AA-P700 AC ADAPTER AA-P700 POWER ON AC100V OFF AC adapter MONITOR SCSI REMOTE DC IN VGA monitor MO drive unit Mount the lens ( page 17) CP700DSA MITSUBISHI PAPER FEED & CUT COPY ONLINE ALARM SHEET PAPER DATA POWER OPEN Flash Compati
ページ20に含まれる内容の要旨
KY-F70B C-MOUNT CAMERA DIGITAL 2. Before recording (continued) Inserting the lithium battery The lithium battery is used to back up the time and date data. Install the lithium battery (CR2025) before using the unit. Replace the battery once two year. If the BATTERY EMPTY message appears when turning on the power, replace the battery with a fresh lithium battery. < > Install Mini screwdriver (attached) Screws Battery compartment 1. Remove the screws (2 units) using the attached mini screw- driv
