ページ1に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR PART 95-7339
APPLICATIONS
Hyundai Genesis Coupe 2.0 2010-up
(For models equipped with manual climate control)
95-7339B
95-7339S
KIT FEATURES
• DDIN head unit provision
• ISO stacked head unit provision
• Painted to match factory finish
95-7339B=Black 95-7339S=Silver
KIT COMPONENTS
• A) Trim Panel • B) Double DIN brackets • C) (6) PC-7503 Panel Clips
A B C
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness: • 70-7303 2009-Up Kia/Hyundai Harness
ページ2に含まれる内容の要旨
95-7339 Table of Contents Dash Disassembly – Hyundai Genesis Coupe 2.0 2010-up 3 Kit Preparation – Hyundai Genesis Coupe 2.0 2010-up 4 Kit Assembly – Double DIN/stacked ISO DIN head unit provision 5 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer also to the instructions included
ページ3に含まれる内容の要旨
95-7339 Dash Disassembly 1. Unclip and remove the shifter trim panel. (Figure A) 2. Unclip and remove the radio/climate control trim panel. (Figure B) 3. Unclip and remove the display trim panel above radio. (Figure C) 4. Remove (4) Phillips screws securing the radio. 5. Remove (4) Phillips screws securing the climate control to the factory trim panel. (Figure A) Continue to kit preparation (Figure B) (Figure C) 3
ページ4に含まれる内容の要旨
95-7339 Kit Preparation 1. Attach the climate control to the 95-7339 trim plate using the factory hardware. (Figure A) 2. Attach the (6) panel clips to the 95-7339 trim plate. (Figure B) Continue to kit assembly (Figure A) (Figure B) 4
ページ5に含まれる内容の要旨
Kit Assembly 95-7339 Double DIN/stacked ISO DIN head unit provision 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Attach the Double DIN brackets to the aftermarket radio then mount the unit in the sub dash. (Figure A) 3. Reassemble dash in reverse order of disassembly using the 95-7339 trim (Figure A) panel instead of
ページ6に含まれる内容の要旨
Notes
ページ7に含まれる内容の要旨
Notes
ページ8に含まれる内容の要旨
INSTALLATION INSTRUCTIONS FOR PART 95-7339 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION REV. 5/17/11
