Our goal is to provide you with a quick access to the content of the user manual for Lexmark All in One Printer W820. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Lexmark All in One Printer W820.
If looking through the Lexmark All in One Printer W820 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Lexmark All in One Printer W820 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Lexmark All in One Printer W820. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Loading the multipurpose feeder 1
The multipurpose feeder holds approximately 35 sheets of 20 lb paper.
Note: You can load the multipurpose feeder with or without the duplex unit
attached to the printer.
1 Open the multipurpose feeder.
Loading the multipurpose feeder 2 Printing 2 Slide the side guide all the way to the back. 3 Adjust the extension guide to the length of the print media to be used. Paper handling Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark W820
Loading the multipurpose feeder 3 Printing 4 Orient the stack of print media correctly for the size, type, and print method you are loading. Refer to the icons on the feeder. Paper handling Note: Do not exceed the maximum stack height indicated on the side guide. Overfilling the feeder may cause paper jams. Maintenance Maximum stack height indicator label Loading Paper size icons and orientation icons Troubleshooting Administration Index www.lexmark.com Lexmark W820
Loading the multipurpose feeder 4 Printing 5 Place the print media along the front side of the multipurpose feeder and push the print media into the printer as far as it will go. Do not force the print media. Paper handling Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark W820
Loading the multipurpose feeder 5 Printing 6 Slide the side guide forward until it lightly touches the stack. Paper handling Maintenance Troubleshooting Note: Once you load print media into the multipurpose feeder, set the Paper Administration Size, Paper Type, and Paper Source from the operator panel or from your software application. When you are not using the multipurpose feeder, remove any print media from the Index feeder, push the extension guide back in, and push the multipurpose feeder t
|1||Lexmark 131||All in One Printer||29|
|2||Lexmark 13B0501||All in One Printer||27|
|3||Lexmark 13B0502||All in One Printer||14|
|4||Lexmark 13B0503||All in One Printer||10|
|5||Lexmark 133||All in One Printer||19|