Summary of the content on the page No. 1
Model 28127 Series
DECT6.0 Cordless Handset
Speakerphone
User’s Guide
Your new GE telephone system is EXPANDABLE up to a total of 7 handsets (by
purchase of optional Model 28107 handset with charge cradle)
Summary of the content on the page No. 2
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, p
Summary of the content on the page No. 3
The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the
Summary of the content on the page No. 4
Hearing Aid Compatibility (HAC) This telephone system meets FCC standards for Hearing Aid Compatibility. Licensing Licensed under US Patent 6,47,009. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any oth
Summary of the content on the page No. 5
Table of Contents EquipmEnt ApprovAl informAtion .................2 set grouP ring ....................................18 intErfErEncE informAtion .............................3 Changing the grouP naMe ................18 HEAring Aid compAtibility (HAc) .................4 Managing sPeed dialing reCord ...........19 licEnsing .....................................................4 adding the sPeed dialing nuMBer ...19 fcc rf rAdiAtion ExposurE stAtEmEnt ........4 editing the sPeed dialing nuMBer ..
Summary of the content on the page No. 6
Table of Contents ringer tone ...............................................31 4-way ConferenCe Calls with an ringer voluMe ...........................................32 outside landline and Cellular Call key tone .....................................................32 siMultaneously ......................................38 ® Bluetooth .....................................................32 Call tiMer .......................................................38 deviCe info ......................
Summary of the content on the page No. 7
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for model 28127xx1) Make sure your package includes the items
Summary of the content on the page No. 8
For Model 28127xx2 there will be ONE additional handset, charge cradle, belt clip, battery pack and cover than shown. NOTE: if a headset is included in your package, it replaces one set of a handset, belt clip, battery pack and cover. For Model 28127xx3 there will be TWO additional handsets, charge cradle, belt clips, battery packs and covers than shown. For Model 28127xx4 there will be THREE additional handsets, charge cradle, belt clips, battery packs and covers than shown. For Model 28127
Summary of the content on the page No. 9
Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference
Summary of the content on the page No. 10
Handset Layout Visual Message Waiting Indicator Volume 5/6 Earpiece (buttons) CID/5 Display (Caller ID button) Push to Talk SKR (button) (soft key right) SKL (soft key left) Speaker indicator Sound quality /4 TALK indicator (button) PHONEBOOK/3 SPKR (button) (button) Headset jack TALK (button) DELETE/flash REDIAL/6 (button) (button) END/cancel MUTE (button) (button) #PAUSE/ringer (button) *TONE (button) Microphone 10
Summary of the content on the page No. 11
Base Layout Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before using the cordless handsets. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved model 5-2840 Nickel-metal Hydride battery (Ni-MH), which is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. . Locate the battery compartment on the back of the han
Summary of the content on the page No. 12
NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. PRESS DOWN FIRMLY 4. Insert the battery pack. 5. Close the battery compartment by pushing the door up until it snaps into place. 6. Place the handset in the charging cradle. Allow handset to charge for 16 hours prior to first use. If you do not properly charge the handset, battery performance is compromised. Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (
Summary of the content on the page No. 13
7. Use the number keys to enter the time and use the or button to select AM or PM. 8. Press the Store (SKL) button to save the settings. You will hear a confirmation tone. 9. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised. CAUTION: To reduce risk of personal injury, fire or damage use only the 5-2812 power adaptor listed in the user’s guide. This power adaptor is intended to be correctly orientated in
Summary of the content on the page No. 14
Programming Information The handset menus give you access to all of the built-in features. Press the Menu (SKL) button to display the menu options, then press the or button to navigate to the desired option. Press the Select (SKL) button to activate a menu option. For details on programming, refer to the applicable section. During programming, you may press the Back (SKR) button at any time to exit the menu and keep the previous setting. NOTE: You can press the END/cancel button at any tim
Summary of the content on the page No. 15
NOTE: You may press the button to short-cut to the phone book. 3. Press the Select (SKL) button to enter the phone book. NOTE: If there are no records stored you will go directly to the Add Record menu. 4. Press the Option (SKL) button to enter submenu. 5. Use the or button to scroll to Add Record. 6. Press the Select (SKL) button to confirm. Phone book memory space shows on the display for seconds. The screen displays Enter Name. 7. Use the number keys to enter a name ( up to 15 charact
Summary of the content on the page No. 16
14. Press the Select (SKL) button to confirm. Storing the Last Number Dialed Store a dialed number when reviewing it: 1. Make sure the phone is OFF (not in talk mode). . Press the button on the handset to access the Dialed Calls menu. 3. Use the or button to scroll to desired record. 4. Press the Store (SKL) button to save the number. 5. Use the or button to select from the desired category; Home, Office, Cell or Other. 6. Press the Select (SKL) button to confirm. The screen displays E
Summary of the content on the page No. 17
- OR - Press the number keys to go to the name of the records started with the corresponding character. NOTE: Your phone book records are sorted automatically in alphabetical order. 5. Press the Option (SKL) button to view the details of the record. Editing a Phone Book Record 1. When reviewing the phone book records list, use the or button to scroll to the desired record or enter the first character of name for alphabetical search. . Press Option (SKL) button to access the option menu
Summary of the content on the page No. 18
Managing the Record Grouping in Phone Book This enables you to group a selection of records together, then specify a certain ringtone for the group. 1. Make sure your phone is OFF (not in talk mode). . Press the button to short-cut to phone book menu. 3. Use the or button to scroll to desired record. 4. Press the Option (SKL) button to access the Option menu. 5. Use the or button to scroll to Grouping. 6. Press the Select (SKL) button and use the or button to select desired group. 7.
Summary of the content on the page No. 19
. Use the number keys to enter a name (up to 15 characters, including space.) NOTE: If you make a mistake press the DELETE/flash button to backspace and erase the wrong character(s). 3. Press the Store (SKL) button to save the new group name. Managing Speed Dialing Record Adding the Speed Dialing Number 1 Make sure your phone is OFF (not in talk mode). . Press the button to short-cut to phone book menu. 3. Use the or button to scroll to desired record. 4. Press the Option (SKL) button t
Summary of the content on the page No. 20
3. Press the Select (SKL) button. The screen displays DELETE?. 4. Press the Yes (SKL) button to confirm the selection. The screen displays DELETED. Transferring the Phone book record between handset(s) 1. Make sure your phone is OFF (not in talk mode). . Press the button to short-cut to phone book menu. 3. Use the or button to scroll to desired record. 4. Press the Option (SKL) button to access the option menu. 5. Use the or button to scroll to Transfer Record. 6. Press the Select (SKL)
