Lexmark X34X user manual

Summary of the content on the page No. 1

� � � � �
5 Make sure the paper is below the maximum fill The MFP automatically engages the print
Lexmark™ X342
lines on the left inside wall of the tray. media.
6 Squeeze and adjust the paper guides until they
Quick Reference
lightly touch the side of the stack of paper.
Loading paper and
specialty media
Loading paper in the paper tray
1 Remove the paper tray.
7 Close the paper tray.
Copying
Loading paper in the manual
feeder
Making a copy
1 Make sure:
1 Load the original document face-up

Summary of the content on the page No. 2

� � � 6 Press or repeatedly until the setting you b Remove the toner cartridge using the Printing want to use is selected. handle. Note: Printing a document 1 2-Up—Prints two copied documents on a 1 Load paper. page. 2 With a document open, click File  Print. 4-Up—Prints four copied documents on a 3 Click Properties, Options, Setup, or page. 2 Preferences. Off—Prints one copied document on a 4 Adjust the settings. page. 3 Remove the toner cartridge from the packaging, 5 Click OK. 7Press

Summary of the content on the page No. 3

Note: The toner cartridge snaps into place Replacing the photoconductor Cleaning the inside of the MFP when correctly installed. 1 Press the access button on the left side of the CAUTION: The fuser area is hot. Avoid contact MFP, and open the front cover. with the fuser area to prevent burns. 1 Warning: While cleaning the inside of the MFP, be careful not to touch the transfer roller located under the toner cartridge. Oil from your fingers can affect print quality. 7 Reinstall the print c