Summary of the content on the page No. 1
NetLink Components
NetLink Telephony Gateway
NetLink SVP Server
NetLink Wireless Telephones
Quick Start Guide
NetLink Telephony Gateway environments
Vendor IP environments
72-1065-01
Issue B
Summary of the content on the page No. 2
SpectraLink Corporation Quick Start Guide NetLink Components Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for use SpectraLink® by Polycom personnel and customers. The LinkPlus drawings and specifications contained herein are Link the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior SVP written approval of Polycom, nor be implied to Are trademarks and registered trademarks of grant
Summary of the content on the page No. 3
SpectraLink Corporation Quick Start Guide NetLink Components Note concerning the NetLink Telephony Gateway and the NetLink SVP Server: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
Summary of the content on the page No. 4
SpectraLink Corporation Quick Start Guide NetLink Components Table of Contents 1. About This Document 5 1.1 SpectraLink Corporation Model Numbers 5 1.2 Referenced Documents 5 1.3 Customer Support Hotline 6 2. NetLink Overview 7 2.1 NetLink Telephony Gateway (SRP) environments 7 2.2 Other IP Protocol environments 7 3. NetLink Component Setup Sequence 8 4. System Diagrams 9 4.1 System Diagram for other IP Protocol environment 9 4.2 System Diagram for NetLink Telephony Gateway environm
Summary of the content on the page No. 5
SpectraLink Corporation Quick Start Guide NetLink Components 1. About This Document This document is a short guide to the installation, setup, and maintenance of the SpectraLink NetLink Wireless Telephone System when utilized with a traditional PBX or IP Telephony Server. It outlines the steps to install and configure the NetLink Telephony Gateway, the NetLink SVP Server, and the NetLink Wireless Telephones. 1.1 SpectraLink Corporation Model Numbers This document covers the following re
Summary of the content on the page No. 6
SpectraLink Corporation Quick Start Guide NetLink Components 1.3 Customer Support Hotline SpectraLink wants you to have a successful installation. If you have questions please contact our Customer Support Hotline at (800) 775-5330. The hotline is open Monday through Friday, 6 a.m. to 6 p.m. Mountain time. For Technical Support: technicalsupport@polycom.com For Knowledge Base: http://www.polycom.com/usa/en/support/voice/voice.html For Return Material Authorization: rmacoordinator@polycom.
Summary of the content on the page No. 7
SpectraLink Corporation Quick Start Guide NetLink Components 2. NetLink Overview There are two basic types of NetLink environments – those that utilize SpectraLink Radio Protocol (SRP) with the NetLink Telephony Gateway and those that use IP protocols from third-party vendors. This document will outline the setup of both types of systems. 2.1 NetLink Telephony Gateway (SRP) environments The components that must be installed and configured in a SRP system are the NetLink Telephony Gatewa
Summary of the content on the page No. 8
SpectraLink Corporation Quick Start Guide NetLink Components 3. NetLink Component Setup Sequence Generally, the installation and configuration process follows these steps. 1. WLAN Set up the LAN: A wireless LAN must be properly configured and operational through the use of 802.11b wireless access points (APs). All NetLink components must be on the same subnet. See the Polycom WLAN Compatibility Table for APs that have been tested with NetLink Wireless Telephones. A TFTP server must be p
Summary of the content on the page No. 9
SpectraLink Corporation Quick Start Guide NetLink Components 4. System Diagrams The following diagrams show two examples of WLAN systems that utilize NetLink components. The first diagram shows a system that utilizes a third-party IP protocol with NetLink components. The second diagram shows an example of a larger NetLink Telephony Gateway environment utilizing five NetLink Telephony Gateways and an SVP Server. 4.1 System Diagram for other IP Protocol environment Access Point TFTP Serv
Summary of the content on the page No. 10
SpectraLink Corporation Quick Start Guide NetLink Components 4.2 System Diagram for NetLink Telephony Gateway environments Administrative Computer Access Point NetLink SVP Server Ethernet Switch Wireless Telephones Access Point NetLink Telephony Gateway optional NetLink Telephony Wireless Gateway POS NetLink Telephony Gateway NetLink Telephony Gateway NetLink Telephony Gateway CAT 5 cable 25 pair cable Multiple phone cables Demarc Block Phone cable Device supplied b
