Summary of the content on the page No. 1
USER’S MANUAL
Model: mi6820
Accessory Handset
8
FEATURING: Handset Speakerphone Tri-lingual
Prompts Headset Compatible (2.5mm)
5.GHz
Digital Spread
Spectrum
www .vtechcanada.com
Summary of the content on the page No. 2
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water (for example, near a bath tub
Summary of the content on the page No. 3
Important Safety Instructions VTech Communications, Inc. Customer Service: www.vtechphones.com or 1-800-595- 9511. In Canada contact VTech Telecommunications Canada Ltd. at: www.vtechcanada.com or 1-800-267-7377. BEFORE USING YOUR mi 6820, CAREFULLY PEEL OFF THE PROTECTIVE FILM COVERING THE DISPLAYS. IMPORTANT: Your mi 6820 is an accessory handset for use with the mi 6821, mi 6822, mi 6861 mi 6862 or mi6872 systems. You must have one of these base units in order to use the mi 6820 accessory hand
Summary of the content on the page No. 4
Parts Check List 1. Handset 4. Belt Clip 2. Charger Adapter 5. User’s Manual 3. Charger 6. Battery To purchase replacement batteries, visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 1-800-595-9511. In Canada, contact VTech Telecommu- nications Canada Ltd. at www.vtechcanada.com or 1-800-267-7377. NOTE: Use only VTech batteries (part number 89-1323-00-00). 3
Summary of the content on the page No. 5
The Handset Layout 1. Earpiece 8. Select (Menu) 2. LCD Display 9. Phonebook (Scroll Up) 3. Headset Jack (2.5mm) 10. Speakerphone 4. CID (Scroll Down) 11. Off (Clear) 5. Phone (Flash) 12. Volume Control 6. Dialing Keys (0-9, *, #) 13. Intercom 7. Redial (Pause) 14. Mute (Delete) 4
Summary of the content on the page No. 6
Setup Connecting Power to Handset Charger Because the mi 6820 is an accessory handset to the mi 6821, mi 6822, mi 6861 mi 6862 or mi 6872 all you need to do is choose the location for your handset charger and plug in the power supply into an electrical outlet. CAUTION: Use only the VTech power supply provided with your tele- phone. Installation of Battery 1. Remove battery compartment cover by pressing on the indentation and sliding downward. 2. Place the battery in the
Summary of the content on the page No. 7
Setup Charging of the Handset Battery The handset of your cordless telephone is powered by a rechargeable battery. It charges automatically whenever the handset is in its charger. You should charge the battery for 10-12 hours when you first receive your phone. You will know the bat- tery needs charging when: • The low battery message is displayed: • The handset seems completely dead, the LCD is completely clear and does not activate when you press the keys. IMPORTANT: 1. Do not dispose of batter
Summary of the content on the page No. 8
Registration Your mi 6820 is an accessory handsets for use with the mi 6821, mi 6822, mi 6861, mi 6862 or mi 6872 base units. To register your mi 6820 for the first time: 1. After charging the battery, the screen will display: 2. Press SEL, you will see ENTER BASE ID, if the screen already says ENTER BASE ID, go to step 3. 3. Enter the 15 digit base unit ID code, located on the underside of your main base (mi 6821, mi 6822, mi 6861, mi 6862 or mi 6872). If you make a mistake, press the DELETE
Summary of the content on the page No. 9
Registration Re-Registering a New Handsets to an Existing Base De-register all system handsets by: 1. Unplug the base power plug. 2. Press and hold the PAGE key. 3. Plug the base unit power plug back in and con tinue to hold down the PAGE key for 10 seconds. 4. This will erase all handsets registered to the base. The handsets will now prompt you to: 5. Re-register the handsets to the base by following steps 3 through 6 in Registration,on page 7.
Summary of the content on the page No. 10
Handset Indicators Handset Icons Icon Description MUTE • Turns on when the microphone is muted. NEW • Turns on when there are new call log entries. • Turns on when the ringer is muted. • Low battery indicator and charging indicator. Handset LED LED Description • LED is on when in handsfree mode. Charging LED LED Description CHARGING • LED is On when the handset is charging in the charger. 10 Basic Operation
Summary of the content on the page No. 11
Headset Operation Headset Operation Your mi 6820 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree conversations. If you choose to use the headset option, you must obtain an optional accessory headset that is compatible with the mi 6820. To purchase a headset, visit us on the web at www.vtechphones.com or call VTech Customer Service at 1-800-595-9511, in Canada go to www.vtechcanada.com or call 1-800-267-7377. Once you have a compatible 2.5mm
Summary of the content on the page No. 12
Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your base unit near a sink, bathtub or shower. Electrical storms Elec
Summary of the content on the page No. 13
In Case Of Difficulty If you have difficulties in operating your phone, the suggestions below should solve the problem. If you still have difficulties after trying these suggestions, call VTech Commu- nications at www.vtechphones.com or call VTech Communications at 1-800-595-9511. InCanada contact VTech Telecommunications Canada Ltd. at www.vtechcanada.com or 1-800-267-7377. The Phone Doesn’t Work At All • Make sure the power cord is plugged in. • Make sure the telephone line cord is plugged fir
Summary of the content on the page No. 14
In Case Of Difficulty Common Cure For Electronic Equipment If the unit does not seem to be responding normally, then try to put the handset in its charger. If it does not seem to respond, follow these steps in order: 1. Disconnect the power to the base. 2. Disconnect the handset battery. 3. Wait a few minutes. 4. Connect power to the base. 5. Reinstall the battery. 6. Wait for the handset to re-establish its link with the base. To be safe, allow up to one minute for this to take place.
Summary of the content on the page No. 15
Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTech in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation in- structions, This limited warranty exte
Summary of the content on the page No. 16
Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1- 800-595- 9511, in Canada, call 1-800-267-7377 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call. • Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delive
Summary of the content on the page No. 17
FCC, ACTA, and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. A label is located on the underside of the base unit
Summary of the content on the page No. 18
FCC, ACTA, and IC Regulations FCC Part 68 and ACTA If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA). We are required to provide you with t
Summary of the content on the page No. 19
FCC, ACTA, and IC Regulations equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned. 5. Hearing aid compatibility If this product is equipped with a corded or cordless handset, it is hearing aid compat- ible. 6. Programming/testing of emergency numbers If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telepho
Summary of the content on the page No. 20
FCC, ACTA, and IC Regulations nance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly importa
