Summary of the content on the page No. 1
Operating Instructions
Model No. KX-PS8000
Please carefully read the Operating Instructions and the Utilities and Drivers Reference Guide before using the
Digital Color Imaging System. Keep this CD-ROM in the protective case. Do not expose the CD-ROM to direct
sunlight or extreme heat and do not scratch or smudge the surface of the CD-ROM.
Summary of the content on the page No. 2
BMicrosoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. BPentium is a registered trademark of Intel Corporation. BCorel is a trademark of Corel Corporation. BAdaptec is a registered trademark of Adaptec, Inc. BCentronics is a trademark of Centronics Data Computer Corporation. BTextBridge is a registered trademark of Xerox Corporation. BAdobe and Acrobat are trademarks of Adobe Systems Incorporated. BAvery is a registered
Summary of the content on the page No. 3
Thank you for purchasing the Panasonic KX-PS8000 Digital Color Imaging System (DCIS). The Panasonic KX-PS8000 Digital Color Imaging System consists of the KX-PS8001 Color Laser Printer and the KX-PS8002 Color Scanner. The serial numbers are located on the labels on the rear of the units. For your convenience, record these numbers below and keep this book along with your proof of purchase, in the event of a theft or for future reference. MODEL NO. Printer: KX-PS8001 Scanner: KX-PS8002 SERIAL NO.
Summary of the content on the page No. 4
End-User License Agreement THIS IS A LEGAL AGREEMENT BETWEEN YOU AND PANASONIC. CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT PRIOR TO OPENING THE PACKET OF SOFTWARE PROGRAM. OPENING THE PACKET INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. If you do not agree to these terms and conditions, return the unopened packet and the other components of the Panasonic product to the place of purchase and your money will be refunded. No refunds will be given for the products that
Summary of the content on the page No. 5
FOR USERS IN UNITED STATES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no gua
Summary of the content on the page No. 6
Contents End-User License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Chapter 1 System Requirements . . . . . . . . . . . . .
Summary of the content on the page No. 7
Contents Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Acceptable Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Chapter 3 Unacceptable Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Placing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Duplicating Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Basic U
Summary of the content on the page No. 8
For Your Safety General Warning BTo prevent fire or shock hazard, do not expose this product to rain or any type of moisture. Caution BDo not open covers and do not attempt to repair the unit yourself. Refer servicing to qualified personnel. BAvoid contact with the rotating rollers when the ADF top cover is open. Power Source Warning BThe power source voltage of this unit is listed on the nameplate. Only plug the unit into an outlet with the proper voltage. BWhen you operate this equipment, the
Summary of the content on the page No. 9
For Your Safety Light Source Do not look directly at the light source lamps of the scanner as this may be harmful to your eyes. Moving the Units The scanner weighs approximately 17.3 kg {38.1 lbs.} and the printer weighs approximately 47.9 kg {105.5 lbs.}. They must be handled by two people. Turn the power off and remove the power cords when handling the units. 9
Summary of the content on the page No. 10
For Your Safety Caution Labels DANGER: CAUTION: VORSICHT: ATTENTION: Invisible laser radiation Invisible laser radiation Unsichtbare Laserstrahlung, Rayonnement laser invisible when open and interlock when open and wenn Abdeckung geöffnet dangereux en cas defeated. interlocks defeated. und Sicherheitsverriegelung d'ouverture et lorsque AVOID DIRECT AVOID EXPOSURE überbrückt. la sécurité est neutralisée. EXPOSURE TO BEAM. TO BEAM. NICHT DEM STRAHL EXPOSITION DANGEREUSE AUSSETZEN. AU FAISCEAU. PEL
Summary of the content on the page No. 11
For Your Safety FOR USERS IN U.K. IMPORTANT: FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY Both the printer and scanner are supplied with a moulded three pin mains plug each for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS 1362. Check for the ASTA mark or the BSI mark on the body of the fuse. ASA If t
Summary of the content on the page No. 12
Before You Start Cautions To avoid machine malfunction, do not use the equipment under the following conditions: BDirect exposure to sunlight BAreas of poor ventilation BExtremely high or low temperature [temperature range: 10˚C to BAreas of high dust or chemical 32.5˚C (50˚F to 90.5˚F)] fume concentration (solvent BExtremely high or low humidity (humidity range: 20% to 80% RH) etc.) BCondensation due to rapid change of temperature BUnstable or unlevel surfaces BDirectly in front of air BLiquids
Summary of the content on the page No. 13
Before You Start n CD-ROM To prevent the CD-ROMs from accidental damages: BDo not leave the disc out of the BDo not leave the disc in direct BDo not touch or write on the surface of the disc. protective case. sunlight or near heat sources. BDo not place heavy objects on BTo clean the disc, hold the disc the disc case or drop the case. by its edges and wipe it from the center to the edges with a dry, soft cloth. n Static Electricity Damage To prevent static electricity damage to any of the follow
Summary of the content on the page No. 14
Before You Start Features The KX-PS8000 is a high quality system that provides fast color image processing functions, including color scanning, color printing, and color duplicating. The KX-PS8000 is comprised of two components: BColor scanner (KX-PS8002) BColor laser printer (KX-PS8001) The KX-PS8000 system offers you the following functions: BScanning BPrinting BDigital Duplicating These functions are used for various tasks such as Desktop Publishing, or image editing. Notes: BPositioning the
Summary of the content on the page No. 15
Before You Start Printer Function n High quality Resolution 1 Maximum 1200 dpi * 1 (* with SIMM options installed) n High speed Continuous printing on letter size paper Full-color mode: Maximum 3.5 ppm (pages per minute) for 4 Color (CMYK) 2 Maximum 4.7 ppm for 3 Color (CMY)* Monochrome mode: Maximum 14 ppm 2 (* only when using plain paper) n Easy operation Printer driver Easily print full-color documents. Digital Duplicator Function n High quality Resolution Resolution is set according to the
Summary of the content on the page No. 16
Before You Start System Requirements PC To operate the KX-PS8000 Enhanced system effectively, see the following. CPU: More than Pentium or Pentium PRO (133 MHz or faster CPU is recommended.) 1 2 3 4 Operating System: Windows¨ 3.1* , Windows 95* or Windows NT¨ 4.0* * (Intel only) RAM: 16 MB or more (More than 32 MB is recommended.) Free disk space: 100 MB or more Virtual memory: 16 MB or more (More than 32 MB is recommended.) for Windows 3.1/95 5 50 MB or more* (More than 100 MB is recommended.)
Summary of the content on the page No. 17
Before You Start Minimum Space Requirements 50 cm (19.7† ) ADF opening space 105 cm (41.3† )* * 126.5 cm (49.8† ) with 2nd cassette feeder (option) Rear 45 cm (17.7† ) 35 cm (13.8† ) Multi Purpose Tray Controller Board Opening Space Opening Space Left Right 50 cm (19.7† ) Media tray Opening 60 cm (23.6† ) Space Front cover opening space Power Source BThe voltage level of the power source must not vary more than – 10% from the voltage level marked on the nameplate (located on the back of the
Summary of the content on the page No. 18
Before You Start Unpacking Make sure that all of the items shown below were provided and have not been damaged. Report damage or shortages to the reseller from which the units were purchased. Page 3 includes an area for recording important information such as the name of reseller, serial numbers, and date of purchase. Note: BSave the original cartons and packing materials for future shipping and transporting of the units. They have been specifically designed to protect the equipment during shipm
Summary of the content on the page No. 19
Before You Start Printer Box 1. Printer 2. Toner cartridges (black, cyan, magenta, and yellow) 3. Power cord 4. SCSI cable (for connection between the scanner and the printer) 5. Guide pins (2) 6. KX-PS8000 Driver & Utility and Operating Manuals CD-ROM 7. Corel Photo-Paint 5 & 6 (CD-ROM) 8. TextBridge (OCR) CD-ROM 9. Color Calibration Card 10. Setup manual 1 23 4 5 6 7 8 9 10 19
Summary of the content on the page No. 20
Before You Start Part Names Scanner n Front side view ADF top cover ( + P. 93) Document guides ( + P. 76) ADF tray ADF ( + P. 31, 76) Scanner glass Power switch ( + P. 53) Scanner panel ( + P. 22) n Rear side view Scanner lock AC inlet ( + P. 30) ( + P. 46, 48) ADF cable ( + P. 31) SCSI connector [SCSI A] ( + P. 44) SCSI ID NO. and terminator switches ( + P. 52) SCSI connector [SCSI B] ( + P. 44) ADF connector ( + P. 31) 20
