Summary of the content on the page No. 1
Specifications
TV RF systems
Contents
B, G, I, D, K, K1, M
Safety precautions 2
Colour systems
COLOUR TELEVISION
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Preparation 3
Receiving channels 1 Confirm which remote control you have ... 3
VHF low channel (VL), VHF high channel (VH), UHF channel (U) INSTRUCTIONS
...
2 Insert the batteries into the remote control 3
Receives cable channels in mid band, super band and hyper band.
..................
3 Connecting the aerial and VCR 4
Thank you for buying th
Summary of the content on the page No. 2
Safety precautions WARNING •To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION •Operate only from the power source indicated on the rear of the TV. •Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. •Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable. When installing this TV, leave spaces for ventilation around
Summary of the content on the page No. 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the four remote controls shown below. Functions you can operate differ depending on the type of remote control. /AV-29WS3> /AV-21FX3/AV-21WX3 /AV-25KX3/AV-25LX3 AV-29WX3> MUTING POWER MUTING POWER MUTING POWER MUTING POWER SYSTEM CINEMA SYSTEM CINEMA SYSTEM SYSTEM COLOUR SOUND SURROUND COLOUR SOUND SURROUND COLOUR SOUND COLOUR SOUND ECO E
Summary of the content on the page No. 4
Preparation 3 Connecting the aerial and VCR •Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. •Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack. • If your TV has an S-connector, you can connect an S-VIDEO compatible device (such as an S- VHS VCR)
Summary of the content on the page No. 5
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes, S-VIDEO signals or component video signals. Also
Summary of the content on the page No. 6
Preparation 6 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV POWER lamp Main power button automatically switches to the language setting mode. SYSTEM CINEMA COLOUR SOUND SURROUND ECO DISPLAY DISPLAY SENSOR button MENU t MENU buttons MENU
Summary of the content on the page No. 7
Basic operation • The illustration below is for the remote control 1 Press the POWER button to turn RM-C1010. Depending on the applicable mod- your TV on. els, the remote controls may not look exactly • If your TV does not turn on, press the Main the same. power button on the TV then press the POWER button again. •You can also turn on your TV by pressing any of the following buttons; POWER MUTING - the CHANNEL m button SYSTEM CINEMA - the Number buttons COLOUR SOUND SURROUND - the TV/VIDEO but
Summary of the content on the page No. 8
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen If the picture is not clear or no colour automatically adjusts to the optimum appears, change the current colour system contrast according to the brightness of your to another colour system. room. This function reduces eye strain and Press this button to select the colour the power consumption of this TV. system. Press this button to select the desired mode. AUTO PAL SECAM NTSC4
Summary of the content on the page No. 9
Remote control buttons and functions button CINEMA SURROUND button < S series only > You can select a sound setting for stereo broadcast programmes and bilingual You can enjoy an enhanced sound for a programmes. wider audience by using CINEMA SURROUND function. Press this button to select a sound setting. Press this button to select one of the CINEMA SURROUND mode. : Stereo sound : Bilingual I (sub I) sound HIGH/LOW: : Bilingual II (sub
Summary of the content on the page No. 10
Remote control buttons and functions OFF TIMER button RETURN + button You can set the TV to automatically turn off You can set a channel you frequently view after a set time. to the Return Channel and you can view that channel at any time with one-touch. Press this button to select the period of time. To set the channel to the Return Channel: •You can set the period of time to a maximum of 1 Select the channel you want to set 120 minutes in 10 minute increments. to the Return Channel. •1 minute
Summary of the content on the page No. 11
Viewing teletext programmes < S series only > Using the List Mode You can store the numbers of your favourite Ι/ΙΙ TV/TEXT teletext pages in the List mode and call them TV/TEXT up quickly using the coloured buttons. TV/VIDEO 123 OFF To store the page numbers: TIMER 456 PICTURE MODE 1 Press the MODE button to engage 789 the List mode. CHANNEL RETURN+ SCAN 0 -/-- The stored page numbers are displayed CHANNEL VOLUME at the bottom of the screen. Coloured TEXT 2 Press a coloured button to select a bu
Summary of the content on the page No. 12
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text You can return to the index page instantly. (such as answers to a quiz). Press the INDEX button. You can display the hidden text. In the List mode: Each time you press the REVEAL button, Returns to the page number displayed in the text is hidden or revealed. lower left area of the screen. HOLD SUBPAGE You can hold a teletext page on the screen Some teletext pages include sub-pages that for as long as you want, even
Summary of the content on the page No. 13
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the MENU / buttons to SYSTEM CINEMA change function settings. COLOUR SOUND SURROUND ECO DISPLAY SENSOR DISPLAY Example: Changes the AUTO button SHUTOFF setting. MENU t MENU buttons MENU / MENU 2 MENU 2 buttons Ι/ΙΙ TV/TEXT AUTO SHUTOFF OFF AUTO SHUTOFF ON C
Summary of the content on the page No. 14
Using the TV’s menus INPUT VNR You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “MENU 1” menu, then select “VNR”. “INPUT”. MENU 1 INPUT TV MENU 1 VNR ON INPUT TV COMPRESS(16:9) ON VNR ON PICTURE TILT 00 COMPRESS(16:9) ON PICTURE TILT
Summary of the content on the page No. 15
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals You can mute the sound and change the are received for about 15 minutes or longer picture into a blue screen while no signals after the end of a broadcast. are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO 1 Press MENU T to display the SHUTOFF”. “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON
Summary of the content on the page No. 16
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to You can adjust the picture as you like. the video signal input from the external 1 Press MENU T to display the device connected to the VIDEO-2 terminal. “MENU 4” menu. If this setting is incorrect, images will not be displayed. MENU 4 TINT COLOUR 1 Press MENU T to display the BRIGHT CONT “MENU 2” menu, then select SHARP “VIDEO-2 SET”. SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Summary of the content on the page No. 17
Using the TV’s menus AI VOLUME AUTO CH PRESET You can prevent the sudden increase or You can automatically preset all TV channels decrease of volume that occurs when that can be received by your TV to channels. changing channels or switching VIDEO 1 Press MENU T to display the modes. “MENU 3” menu, then select “AUTO 1 Press MENU T to display the CH PRESET”. “MENU 5” menu, then select MENU 3 AUTO CH PRESET “AI VOLUME”. MANUAL CH PRESET LANGUAGE ENGLISH
Summary of the content on the page No. 18
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. MANUAL 1 Press MENU T to display the FINE “MENU 3” menu, then select SKIP NO SOUND SYSTEM B/G “MANUAL CH PRESET”. EXIT MENU 3 SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY AUTO CH PRESET FINE BY VOL-+ DISPLAY MANUAL CH PRESET LANGUAGE
Summary of the content on the page No. 19
Using the TV’s menus / 2 Press MENU to select SKIP language. You can set undesired channels to be The on-screen display indications are in skipped. Channels set to be skipped cannot the selected language. be selected by the CHANNEL m buttons nor the CHANNEL SCAN button. • Channels to which TV channels have not been TEXT LANGUAGE preset are automatically set to be skipped. < S series only > 1 Press MENU T to display the “MENU 3” menu, then select You can select one of 5 teletext language “MANUAL
Summary of the content on the page No. 20
TV buttons and parts Front 8 7 9 - 345 6 2 1 VR L/MONO IN (VIDEO-3) 1 2 345 6 87 VR L/MONO IN (VIDEO-3) 9- V L/MONO R MENU CHANNEL VOLUME POWER STANDBY IN (VIDEO-3) EXIT 2 3 4 5 7 8 9 0 - 1 2 3 4 5 7 8 9 - POWER MENU CANNEL VOLUME L/MONO VR IN (VIDEO-3) EXIT 12 34 5 7 8 9 - 20 LCT1170-001A-H 20 8/6/2002, 14:39
