Summary of the content on the page No. 1
COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
AV-21MS15
Remote control buttons and basic functions .............................. 4
AV-29MS15
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture..........................................
Summary of the content on the page No. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 7 If you are not going to use this TV for a long period of time, be sure to EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. disconnect the AC plug from the AC socket. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE 8 The apparatus shall not be exposed to dripping or splashing and that FOLLOWING RULES
Summary of the content on the page No. 3
Knowing your TV’s features Main features DVD FUNCTION Just connect DVD player to the television. The television will detect DVD signal and display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire. A2/NICAM You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 EXIT (STEREO / I II) or NICAM Sound-multiplex system. FAVORITE CH (Channel) You can register up to four favorite channels for quick re
Summary of the content on the page No. 4
Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 1 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 8 6 EXIT 5 VOLUME -/+ Adjust the volume level. 3 6 TV/VIDEO Select TV or video terminal input. 2 7 EXIT On the other hand, you can use this button to EXIT from the menu. 7 MUTING Turn off the volume. Press this button again to resume the vol
Summary of the content on the page No. 5
Remote control buttons and basic functions (continued) Top menu 2nd menu Location 3rd menu Location How to operate menus and menus locations MENU PICTURE PICTURE MODE P.9 – – To Operation Note PICTURE SETTING P.10 CONTRAST P.10 Display the MENU Press the MENU/OK button 2. To exit the MENU, BRIGHT P.10 press the DISPLAY/ SHARP P.10 BACK button 8 or COLOUR P.10 choose EXIT menu or TV/VIDEO/EXIT TINT P.10 button 6. WHITE BALANCE P.10 – – Display the top Press 5/∞ buttons 3 to choose a Press ∞ butto
Summary of the content on the page No. 6
3 V L / MONO R IN (VIDEO- ) TV buttons and functions No. Button/terminal Description Page Front of the TV 1 L (main power) Press to turn on or turn off the TV’s main power. – AV-21MS15 2 POWER lamp Indicate the TV is being turned on or off. – ! 9 87 6 34 2 1 No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on. POWER Note: When you turn off the power switch while TV is in standby MENU CHANNEL VOLUME mode, the light of power lamp will be off in 10 -15 seconds
Summary of the content on the page No. 7
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 3 Inserting batteries into the remote control. If you connect a VCR, connect the aerial output jack of your VCR Insert two batteries by following the + and - and the aerial jack on the TV with aerial cable. Then connect the polarities and inserting the - end first.
Summary of the content on the page No. 8
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: AUTO PROGRAM LANGUAGE AUTO PROGRAM EDIT ENGLISH PR CH/CC AV CC 12 1 CH 04 22% SETUP TOUR RESTART? 2 CH 76 3 CH 78 4 CH 05 5 CH 28 3 MENU : OK MENU : OK 6 CH 10 DISPLAY : BACK TV/VIDEO : EXIT MENU : OK INSERT : YES
Summary of the content on the page No. 9
Basic setting for picture COLOUR SYSTEM PICTURE MODE You can select the appropriate colour system when the picture is You can choose the desired picture setting with one-touch. not clear or no colour appears. Press the PICTURE MODE button to select a setting. Press the COLOUR SYSTEM button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. AUTO PAL SECAM NTSC3.58 STANDARD Standard picture setting. USER You can change this picture
Summary of the content on the page No. 10
Basic setting for picture (continued) PICTURE SETTING WHITE BALANCE You can adjust the desired picture setting when selecting USER You can change the white balance of the picture to better match in PICTURE MODE. the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ the desired setting. PICTURE menu MENU PICTURE MODE ❇ USER MENU PICTURE menu WHITE BALANCE 2 Select the PICTURE SETTING in PICTURE menu, then
Summary of the content on the page No. 11
Advanced setting for picture 2 Press the 5/∞ buttons until the picture become level. Then AI ECO SENSOR (ECO) press the MENU/OK button. You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. COMPRESS (16:9) OFF Cancel the function. MODE-1 Mild contrast (recommended.) You can convert a normal picture (4:3 aspect ratio) into a wide MODE-2 Even contrast. picture (16:9 aspect ratio). DISPLAY Display the graphic of the function. Se
Summary of the content on the page No. 12
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal You can choose the desired sound setting. sound occurs even when the picture appears normally. Select the SOUND MODE in SOUND menu, then choose the Press the SOUND SYSTEM button to select a setting. setting. ❇ MENU SOUND menu SOUND MODE B/G I D/K M USER You can change this sound setting as you like. This function is not available in video mode. Select USER and adjust the fre
Summary of the content on the page No. 13
Advanced setting for sound CINEMA SURROUND EQUALIZER You can enjoy an enhanced sound for wider audience. You can adjust the sound level of each frequencies when selecting Press the CINEMA SURROUND button to select a setting. USER mode in SOUND MODE. OFF Cancel the function. 1 Select the USER in SOUND MODE under SOUND menu. ❇ ON Listen to sound with wider audience effect. SOUND menu MENU SOUND MODE USER This function is not available when the SOUND MODE is set to 2 Select the EQUALIZER in SOUND m
Summary of the content on the page No. 14
DVD function AUTO SIGNAL DETECT WHITE BALANCE You can change the white balance of the DVD picture. When the DVD input signal is detected. The input mode will be Select the WHITE BALANCE in DVD MENU under FEATURES menu, changed to VIDEO-2 automatically. then choose the desired setting. For The DVD player, press the “POWER ON” button of the ❇ MENU FEATURES menu DVD MENU machine so that the signal can be detected. WHITE BALANCE For the VCR, press the “POWER ON” button of the machine, and then press
Summary of the content on the page No. 15
Customized setting OFF TIMER VNR You can set the TV to turn off automatically to standby mode after You can reduce the picture noise. a set time. Select the VNR in the PICTURE menu, then choose a setting of Press the OFF TIMER button to select a desired period of time. VNR function. OFF TIMER ❇ PICTURE menu MENU VNR 0 120 You can set the period of time OFF VNR is turned off. 20 to a maximum of 120 minutes AUTO Effect of VNR is automatically controlled. in 10 minutes step. MIN Effect of VNR becom
Summary of the content on the page No. 16
Customized setting (continued) DISPLAY VIDEO-2 SETTING You can display the programme number, video terminal number You can set the VIDEO-2 SETTING according to the video signal and PR list on the screen. output from the external devices connected to the VIDEO-2 terminal. Press the DISPLAY button to select the desired mode: Select the VIDEO-2 SETTING in INSTALL menu, then choose a ON OFF PR LIST setting (Factory setting is COMPONENT). ❇ Choose a TV channel or a VIDEO terminal. ME
Summary of the content on the page No. 17
TV channel presetting 2 Choose EDIT/MANUAL, then press the MENU/OK button. To register the TV channels automatically EDIT menu appears. (AUTO PROGRAM) EDIT You can register the TV channels into the TV’s channel list PR CH/CC automatically. AV 1 CH 04 2 CH 76 1 Display the INSTALL menu. 3 CH 78 4 CH 05 ❇ MENU INSTALL menu 5 CH 28 3 6 CH 10 2 Choose AUTO PROGRAM, then press the MENU/OK button. MENU : OK I
Summary of the content on the page No. 18
TV channel presetting (continued) To edit the channel list (PR LIST) To add in the new channel (MOVE and DELETE in the EDIT menu) (INSERT in the EDIT menu) You can edit the TV channel list as you like. You can add in the new channel in the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be You need to find the “CH/CC” number for the TV channel. Find the changed. “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “
Summary of the content on the page No. 19
TV channel presetting (continued) CH US CCIR OIRT AUSTRALIA CC US CCIR OIRT AUSTRALIA CH/CC number CH 33 US-33, W+48 E33 AU-34 CC 18 E S-18 CH 34 US-34, W+49 E34 AU-35 CC 19 F S-19 CH 35 US-35, W+50 E35 AU-36 CC 20 G S-20 When you want to use the INSERT CH 36 US-36, W+51 E36 AU-37 CC 21 H S-21 function on page 18, find the CH/CC CH 37 US-37, W+52 E37 AU-38 CC 22 I S-22 CH 38 US-38, W+53 E38 AU-39/AU-40 CC 23 J S-23 number corresponding to the channel CH 39 US-39, W+54 E39 AU-41 CC 24 K S-24 CH 4
Summary of the content on the page No. 20
R V L / M N IN (VIDEO-3) O O Additional preparation Before connecting Connecting to rear component/video input • Read the manuals provided with the devices for the proper terminal and output terminal connection. • Turn off all the devices including the TV. Rear of TV AV-21MS15/AV-29MS15 • Note that connecting cables are not supplied. VCR (for playing) COMPONENT VIDEO-1 (VIDEO-2) OUTPUT DVD player (composite signals) INPUT INPUT S Connecting to front video input terminal OVER VCR (for recording)
