Summary of the content on the page No. 1
Color Television Users Guide
For Model:
AV-32S565
Illustration of AV-32S565 and RM-C1257G
Important Note:
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.
Model Number:
LCT1639-001A-A
Serial Number:
0504TNH-II-IM
AV-32S565 1
Summary of the content on the page No. 2
Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T o reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric sho
Summary of the content on the page No. 3
® • As an “ENERGY STAR ” partner, JVC has determined that this product or product model meets the ® “ENERGY STAR ” guidelines for energy efficiency. Important Safeguards CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV
Summary of the content on the page No. 4
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTR
Summary of the content on the page No. 5
PORTABLE CART WARNING (Symbol provided by RETAC) 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.
Summary of the content on the page No. 6
Table of Contents Quick Setup . . . . . . . . . . . 7 Sound Adjust . . . . . . . . . 38 Unpacking your TV . . . . . . . . . . . . 7 Sound Settings . . . . . . . . . . . . . 38 TV Model . . . . . . . . . . . . . . . . 8 Adjust Sound Settings . . . . . . . . . 38 TV Remote Control . . . . . . . . . . . 9 MTS (Multi-channel Sound) . . . . . . . 38 Getting Started . . . . . . . . . . . .
Summary of the content on the page No. 7
AA Alkaline AA Alkaline Quick Setup Unpacking your TV Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: Two AA Batteries 1 Television 1 Remote Control TV CATV VCR DVD POWER TM MULTI SCREEN TWIN INDEX C.C. SWAP SELECT INPUT FREEZE DISPLAY 1 2 3 SLEEP TIMER 4 5 6 SOUND 7 8 9 TUNE RETURN+ VIDE
Summary of the content on the page No. 8
Quick Setup TV Model NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear Panel Diagram MODEL: AV-32S565 75Ω ( VHF/UHF ) UNPLUG THE POWER DÉBRANCHEZ LE CORDON DE LA CORD FROM AC OUTLET PRISE DE COURANT C. A. AVANT BEFORE REMOV
Summary of the content on the page No. 9
Quick Setup TV Remote Control TV CATV VCR DVD POWER MULTI SCREEN TWIN INDEX C.C. FREEZE SWAP SELECT INPUT DISPLAY 1 2 3 SLEEP TIMER 4 5 6 SOUND 7 8 9 TUNE RETURN+ VIDEO STATUS 0 THEATER PRO ASPECT LIGHT MUTING OK CH + VOL VOL – + CH – MENU BACK VCR CHANNEL VCR/DVD POWER TV/VCR PREV NEXT REW PLAY FF REC STOP PAUSE OPEN/CLOSE STILL/PAUSE RM-C1257G TV RM-C1257G MODEL: AV-32S565 • For information on remote control buttons, see pages 41 - 49. 9 AV-32S565 9 5/12/04, 9:1
Summary of the content on the page No. 10
Quick Setup Getting Started Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Step 1 – The Remote Control Before you can operate your remote control, you first need to install the batteries (included). Lift and pull the latch
Summary of the content on the page No. 11
Quick Setup Connections Step 2 – Connecting Your Devices Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV. A VCR is not necessary for operation of the television. If you follow these diagrams and the
Summary of the content on the page No. 12
IN OUT OUT Quick Setup Connections Diagram #1 Cable or Antenna Output 75Ω Coaxial Cable ( VHF/UHF ) OR OUT IN TV Rear Panel Cable Box Note: • If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV. Diagram #2 Cable or Antenna Output AUDIO VIDEO S VIDEO R L TV Rear Panel OVER INPUT 3 INPUT 2 75Ω ( VHF/UHF ) INPUT 1 OVER Coaxial Cable Two-Way OR Splitter VCR IN IN OUT R L
Summary of the content on the page No. 13
Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. • Y ou may also connect the DVD player to Inpu
Summary of the content on the page No. 14
Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To acces, push on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions. INPUT-4 MENU CHANNEL VOLUME OVER OPERATE S–VIDEO VIDEO L/ MONO – AUDIO–R – OR– Camcorder 1) Connect a yel
Summary of the content on the page No. 15
Quick Setup Auto Tuner Setup Step 3 – Auto Tuner Setup JVC’s onscreen menu system lets you set your television up to meet your own personal viewing preferences. The menu screens and their features are discussed in detail in this book. The menu settings are optional, you can set as many or as few of them as you wish. But to begin watching your television right away you will need to run the Auto Tuner Setup. This lets your television learn the channels it is able
Summary of the content on the page No. 16
Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key
Summary of the content on the page No. 17
Remote Programming VCR Codes The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad. 4) Release the DISPLAY button, and confirm the operation of the
Summary of the content on the page No. 18
Remote Programming DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the Display button, then enter the first code number listed with the 10 key pad. 4) Release the Display button, a
Summary of the content on the page No. 19
Remote Programming Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press the POWER and RETURN+ buttons. Hold for at least three seconds and release. 3) Press the POWER button on the remote, and see if the cable or satellite box responds. 4) If there was a response, press RETURN+. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote control
Summary of the content on the page No. 20
Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: π † Up and Down arrows mean press the C H+ or CH– buttons. Pressing the CH+ or CH– buttons let you: • Move vertically in a main menu screen • Move through a submenu screen • Move to the next letter, number, or other choice in a submenu • Back up to correct an error
