Our goal is to provide you with a quick access to the content of the user manual for Sony 560TVL. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony 560TVL.
If looking through the Sony 560TVL user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony 560TVL but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony 560TVL. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Ultra Clear Image 560TVL
Super Vision at Ultra Low Light SHC-745 User’s Manual
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
• SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
please read these instructions carefully and save this manual for future use.
TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145
• SAMSUNG OPTO-ELECTRONICS UK, LTD.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. ■ SHC-745 SERIES • NTSC MODELS • PAL MODELS SHC-745N SHC-745P SHC-745PH The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” ■ MODEL DESCRIPTION within the product's enclosure that may be of sufficient magni
Contents 22 6 How to Use the Camera Features Function Menu Structure 22 8 Precautions 23 How to Set up the Functions 24 LENS 10 Components and Accessories 26 EXPOSURE 28 WHITE BALANCE 11 Overview 29 BACKLIGHT Front View 11 31 SSNR Side View 12 32 DAY/NIGHT Bottom View 13 34 IMAGE ADJ Rear View 14 36 SPECIAL 15 Installation Procedures 41 EXIT Lens 15 • When Using Auto Iris Lens • When Using C/CS Mount Lens 42 Connecting a Monitor 19 Troubleshooting Connecting Power 20 Specifications 44 Control v
Samsung Techwin cares for the environment at all product manufacturing Features stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, Motion Detection Ultra High Resolution and indicates that the product satisfies the EU RoHS Directive. Since the camera detects motion and generates By adopting a diagonal 8mm(1/3 ) 410,000 pixel signal
Precautions Do not install under extreme Do not install in high humidity Do not drop the camera or Never keep the camera face to temperature conditions. environment. subject it to physical shock. strong light directly. Use only under temperature conditions May lower image quality. May cause a product malfunction. May damage the CCD. between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not expose the camera to Do not expose the camera to rain or other ty
Components and Accessories Overview Front View 1. Ultra Low Light Color CCD Camera SHC-745 2. Auto Iris Lens Connector Plug 3. C-Mount Adapter Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. C-Mount Lens Adapter Install this adapter to use a C-Mount Lens. Back Focus Control Lever Adjust focus by this Back Focus Lever. 4. Instruction Manual COLOR CCD CAMERA User’s Manual COLOR CCD CAMERA User’s Manual 10 11
Overview Side View Bottom View Auto Iris Lens Connector Tripod Mounting Bracket Screw Hole L Used to connect Auto Iris Lens plug. Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) You can separate the Tripod Mounting Bracket and install it on the top or bottom of the camera. Make sure to use the Tripod Mounting Bracket when fixing the camera to a bracket or tripod. Otherwi
Overview Installation Procedures Lens Rear View The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. Notes • It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera. • Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the picture quality suffers. *High Voltage Type When Using Auto Iris Lens (SHC-745PH) Funct
Installation Procedures 3. Remove the cover of the auto iris lens connector plug and solder the lens cable to When Using C/CS Mount Lens the connector pin of the plug. Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. • For a Video Drive Lens • For a DC Drive Lens This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a Pin 1: Red (Power) Pin 1: Damping - simple modification is required. Pin 2: NC Pin 2: Damping + Pin 3: White
Installation Procedures • When Using a C Mount Lens Connecting a Monitor 1. Remove the protective glass cover at the front of this product and turn the C- Connect the Video OUT port on the rear panel of the camera to a monitor. Mount Adapter clockwise to install it. CCD Camera Monitor • Since the connection procedure may differ depending on the type of monitor or 2. Turn the C-Mount lens clockwise to install it. peripheral device to be connected, refer to the User Manual for the device to be con
Installation Procedures Connecting Power Control via RS-485 Interface Since power specifications differ depending on the model, make sure to check your The camera can be controlled by using external controllers like a Remote controller. model name and specifications before connecting power. (RS-485 Communication) You can connect power as shown in the following figure. (1) To control by PC Connect the RS-485 control port of the camera and the serial cable through an RS-485 converter. For AC / DC
How to Use the Camera Function Menu Structure How to Set up the Functions You can set up functions using the 5 buttons on the rear of the camera. Setup Menu LENS • DC • VIDEO • MANUAL UP button SET button EXPOSURE • SHUTTER • AGC • SENS-UP LEFT button • RETURN DOWN button WHITE BALANCE • ATW • MANUAL • AWC SET RIGHT button • OUTDOOR • INDOOR BACKLIGHT • OFF • BLC • HLC SSNR • ON • OFF 1. Press the SET button. DAY/NIGHT • COLOR • B/W • AUTO • Main setup menu is displayed on the monitor screen.
How to Use the Camera DC/Video : Select Auto Iris Lens MAIN SETUP Select the function using 1.LENS DC Change the status using • When DC is selected, you can control screen brightness. The range of the LEFT or RIGHT button. the UP or DOWN button. 2.EXPOSURE brightness control is between 1 and 70. Adjust the brightness appropriately 3.WHITE BAL ATW for optimal screen brightness. 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 3. Set up a selected item by using the Left and
How to Use the Camera Notes EXPOSURE • When the SHUTTER is set to ESC after selecting the Internal Synchronization MAIN SETUP Type, the picture may become unstable if the camera faces a bright fluorescent 1.LENS DC light. Therefore, take care when choosing the installation position. 2.EXPOSURE • ESC and MANUAL modes are only available together when the lens is set to MANUAL. 3.WHITE BAL ATW • When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled. 4.BACKLIGHT OFF 5.SSNR ON AGC
How to Use the Camera Notes White Balance (White Bal.) Use the White Balance function to adjust the screen color. • White Balance may not work properly under the following conditions. In this case select the AWC mode. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up When the color temperature of environment surrounding the subject is out of the and Down buttons so that the arrow indicates ‘White Bal.’ . control range (e.g. clear sky, or sunset) 2. Select a desired
How to Use the Camera BLC : Enables a user to directly select a desired area from a picture, and to view HLC : Enable a user to select a mask color of the area more clearly. high light area from a picture. Notes • Because there can be a difference in the effectiveness of HLC according to the BLC ON BLC OFF amount of light area in the screen, optimize the installation angle for the best HLC performance. HLC (High Light Compensation) : • In a dark environment, the HLC is only activated when a hig
How to Use the Camera 3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the 2. Select a desired mode using the Left and Right buttons according to the picture noise reduction level. display you want. COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. AUTO : The mode is switched to Color in a normal environment, but switches to B/W mode when ambient illumination is low. To set up the sswitching time or speed for
How to Use the Camera D-ZOOM : You can use a digital zoom of x1~x10. IMAGE ADJ. 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF SHARPNESS : As you increase this value, the picture outline becomes stronger 5.SSNR ON and clearer. Adjust this value appropriately depending on the sharpness of the picture. 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EX
How to Use the Camera Set it to ‘ON’ by using the Left and Right buttons. SPECIAL Notes Notes 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. • • When the CAM TITLE menu is ‘OFF’, no When the CAM TITLE menu is ‘OFF’, no SPECIAL 1. CAM TITLE OFF title will be displayed on the monitor title will be displayed on the monitor MAIN SETUP 2. SYNC INT screen even if you enter one. screen even if you enter one. 3. MOTIO
How to Use the Camera Enter a title, move the cursor to ’POS’ and When the SPECIAL menu screen is displayed, press the Up and Down buttons press the SET button. The entered title FRONT DOOR so that the arrow indicates MOTION DET . appears on the screen. Select the position to Set up the mode using the 4 direction buttons. display the title on the screen by using the 4 - SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, direction buttons and press the SET button. mot
|1||Sony 3D Bloggie MHS-FS3||Digital Camera||31|
|2||Sony 838 MHz to 862 MHz||Digital Camera||19|
|3||Sony 4-133-499-11 (1)||Digital Camera||15|
|4||Sony 4-187-045-11(1)||Digital Camera||28|
|5||Sony 4-132-058-11(1)||Digital Camera||26|