Our goal is to provide you with a quick access to the content of the user manual for Sony DSCT70P. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony DSCT70P.
If looking through the Sony DSCT70P user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony DSCT70P but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony DSCT70P. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Digital Still Camera
Instruction Manual GB
For details on advanced operations, please read “Cyber-
shot Handbook” (PDF) and “Cyber-shot Step-up Guide”
on the CD-ROM (supplied) using a computer.
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
© 2007 Sony Corporation 3-219-483-11(1)
Owner’s Record IMPORTANT The model and serial numbers are located on the bottom. Record the serial number in SAFEGUARDS the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. For your protection, please read these safety Model No. DSC-T70/T75/T200 instructions completely before operating Serial No. ___________________________ the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions WAR
long periods of time, unplug it from the wall [ Cleaning outlet and disconnect the antenna or cable system. Unplug the set from the wall outlet before This will prevent damage to the set due to cleaning or polishing it. Do not use liquid cleaners lightning and power-line surges. or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. Service Installation [ Damage Requiring Service [ Water and Moisture Unplug the set from the wall outlet and refer
Read this first CAUTION For Customers in the U.S.A. Replace the battery with the specified type only. If you have any questions about this product, you Otherwise, fire or injury may result. may call: Sony Customer Information Center Do not expose the batteries to excessive heat such 1-800-222-SONY (7669) as sunshine, fire or the like. The number below is for the FCC related matters only. For Customers in the U.S.A. and [ Regulatory Information Canada Declaration of Conformity Trade Name: SONY
[ CAUTION For Customers in Europe You are cautioned that any changes or modifications not expressly approved in this This product has been tested and found compliant manual could void your authority to operate this with the limits set out in the EMC Directive for equipment. using connection cables shorter than 3 meters (9.8 feet). [ Note: This equipment has been tested and found to [ Attention comply with the limits for a Class B digital The electromagnetic fields at the specific device
[ Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108- 0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Notice for customers in the United Kingdom A moulded plug complying with BS
Table of contents IMPORTANT SAFEGUARDS .................................................................... 2 Read this first ............................................................................................ 4 Notes on using your camera .................................................................... 8 Getting started ................................................................................. 9 Checking the accessories supplied ...............................................
Notes on using your camera [ Internal memory and “Memory [ Notes on the LCD screen Stick Duo” back up � The LCD screen is manufactured using extremely high-precision technology so over Do not turn off the camera or remove the battery 99.99% of the pixels are operational for pack or “Memory Stick Duo” while the access effective use. However, there may be some tiny lamp is lighted, as the internal memory data or black points and/or bright points (white, red, “Memory Stick Duo” data may be
Getting started Checking the accessories supplied � Battery charger BC-CSD (1) � Adaptor plate (1) You can place the camera on the Cyber-shot Station (not supplied) using the adaptor plate. � Power cord (mains lead) (1) � USB, A/V cable for multi-use terminal (1) (not supplied in the USA and Canada) � HD Output Adaptor Cable (1) (DSC-T75 only) � Rechargeable battery pack NP-BD1 (1)/ Battery case (1) � Paint pen (1) � Wrist strap (1) � CD-ROM (Cyber-shot application software/ “Cyber-shot Handboo
1 Preparing the battery pack For customers in the USA and For customers in countries/regions other than the Canada USA and Canada Plug to the wall outlet to the wall outlet CHARGE lamp CHARGE lamp Power cord (mains lead) 1Insert the battery pack into the battery charger. 2Connect the battery charger to the wall outlet (wall socket). The CHARGE lamp lights up, and charging starts. When the CHARGE lamp turns off, charging is finished (Practical charge). If you continue charging the battery pack
2 Inserting the battery pack/a “Memory Stick Duo” (not supplied) Battery/ “Memory Stick Duo” cover Insert the “Memory Stick Duo” with the terminal side Battery facing the lens. eject lever Open Close Align the v mark of the battery slot with the v mark on the side of the battery pack. Press and hold the battery eject lever and insert the battery pack. 1Open the battery/“Memory Stick Duo” cover. 2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks. 3Insert the batt
[ To check the remaining battery charge Press POWER button to turn on and check the remaining battery on the LCD screen. Battery remaining indicator Battery Sufficient Battery Battery half Battery low, Change the battery remaining power almost fully full recording/ with fully charged guidelines remaining charged playback one, or charge the will stop battery. (The warning soon. indicator flashes.) � If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also show
3 Turning the camera on/setting the clock POWER button Lens Touch panel Lens cover 1Press the POWER button or slide the lens cover downward. 2Set the clock by touching the button on the touch panel. 1 Touch the desired date display format, then touch [t]. 2 Touch each item, then set its numeric value by touching v/V. 3 Touch [OK]. On the touch panel buttons Perform settings on this camera by lightly touching the buttons or icons on the screen with your finger. � When the item you want to set
[ To set the date and time again Touch [HOME], then touch (Settings) t [ Clock Settings] (pages 22, 23). [ When you turn on the power � Once the battery is inserted in the camera, it may take time before operation becomes possible. � If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function). 14
Shooting images easily (Auto Adjustment mode) Zoom (W/T) lever Shutter button Microphone Self-timer lamp Flash DSC-T70/T75 Lens cover Tripod receptacle (bottom) Microphone 1Open the lens cover. 2Hold the camera steady, keeping your arm at your side. Position the subject in the center of the focus frame or touch the point for focusing. � is displayed if a face is detected in the touched position or is displayed if an object other than a person’s face is detected. 3Shoot with the shutter bu
Image size/Self-timer/Shooting mode/Flash/Macro/Display A Changing the image size B Using the self-timer C Changing the shooting mode D Selecting a flash mode for still images E Shooting close-up F Changing the screen display [ Changing the image size Touch the image size setting icon on the screen. Touch the desired item, then [BACK]. Still image For prints up to A3 (11 × 17") Shoot in 3:2 aspect ratio For prints up to A4(8.5 × 11") For prints up to 10 × 15 cm (4 × 6") or 13 × 18 cm(5 × 7") Sho
[ Changing the shooting mode Touch the shooting mode setting icon on the screen. Touch the desired item, then [BACK]. Auto Adjustment Allows you to shoot still images with the setting adjusted automatically. Scene Selection Allows you to shoot with preset settings according to the scene. Program Auto Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu. Allows you to record movies w
[ Flash (Selecting a flash mode for still images) Touch the flash mode setting icon on the screen. Touch the desired item, then [BACK]. Flash Auto (): Strobes when there is insufficient light or backlight (default setting) Flash On ( ) Slow Synchro (Flash forced on) ( ): The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light. Flash Off ( ) [ Macro/Close focus (Shooting close-up) Touch the Macro/Close focus mode setting icon on the screen. Touch the
Viewing/deleting images (Playback) button Zoom (W/T) lever DSC-T70/T75 Speaker Multi connector (bottom) Speaker 1Press (Playback) button. If you press (Playback) when the camera is powered off, the camera is turned on automatically and set to playback mode. To switch to the shooting mode, press (Playback) again. 2Touch (previous) / (next) on the screen to select an image. Movie: Touch B to playback a movie. Fast forward/Rewind: m/M (Touch B or x to return to normal playback.) Volume cont
[ To view an index screen Touch (Index) to display the index screen. Touch / to display the previous/next page. To return to the single image screen, touch the thumbnail image. � You can also access the index screen by selecting [ Image Index] in (View Images) on the HOME screen. � If you touch [DISP] in index mode, you can set the number of images displayed in the index screen. [ To delete images in index mode 1 Touch while the index screen is displayed. 2 Touch the thumbnail images to add
|1||Sony 3D Bloggie MHS-FS3||Digital Camera||31|
|2||Sony 838 MHz to 862 MHz||Digital Camera||33|
|3||Sony 4-133-499-11 (1)||Digital Camera||15|
|4||Sony 4-187-045-11(1)||Digital Camera||21|
|5||Sony 4-132-058-11(1)||Digital Camera||14|