Toshiba All in One Printer 355 user manual

User manual for the device Toshiba All in One Printer 355

Device: Toshiba All in One Printer 355
Size: 7,14 MB
Date of adding : 2014-10-05 12:43:53
Number of pages: 128
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Toshiba All in One Printer 355. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Toshiba All in One Printer 355.

For your convenience

If looking through the Toshiba All in One Printer 355 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualToshiba All in One Printer 355 on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Toshiba All in One Printer 355 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Toshiba All in One Printer 355 user manual
Advertisement
« Page 1 of 128 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Toshiba All in One Printer 355 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Toshiba All in One Printer 355. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MULTIFUNCTIONAL DIGITAL SYSTEMS
Troubleshooting Guide

Summary of the content on the page No. 2

©2009, 2010 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.

Summary of the content on the page No. 3

Preface Thank you for purchasing TOSHIBA Multifunctional Digital Systems. This manual describes how to troubleshoot the problems that could occur while you are using the equipment. Keep this manual within easy reach, and use it to configure an environment that makes the best use of the e-STUDIO’s functions. This equipment provides the scanning function as an option. However, this optional scanning function is already installed in some models. How to read this manual Symbols in this manual I

Summary of the content on the page No. 4

Summary of the content on the page No. 5

CONTENTS Preface....................................................................................................................................... 1 Chapter 1 TROUBLESHOOTING FOR THE HARDWARE Messages Displayed on the Touch Panel .............................................................................. 8 Clearing a Paper Jam............................................................................................................. 11 Locating a paper jam...............................

Summary of the content on the page No. 6

Cannot remember the document password for a Private Print job...................................... 79 Printer Driver Problems .........................................................................................................80 Cannot print (port setting problems).................................................................................... 80 Cannot print (SNMP Community Name problems).............................................................. 80 Command line options not process

Summary of the content on the page No. 7

Chapter 7 CHECKING THE EQUIPMENT STATUS WITH TopAccess Hardware Status Icons on TopAccess [Device] Tab......................................................... 104 Error Messages .................................................................................................................... 106 Error Codes........................................................................................................................... 110 Error codes on print jobs ...................................

Summary of the content on the page No. 8

6 CONTENTS

Summary of the content on the page No. 9

1.TROUBLESHOOTING FOR THE HARDWARE This chapter describes how to troubleshoot problems with paper, toner and other finishing processes. This chapter also describes how to supply the paper, toner and staples. Messages Displayed on the Touch Panel .............................................................................. 8 Clearing a Paper Jam............................................................................................................. 11 Locating a paper jam....................

Summary of the content on the page No. 10

1 TROUBLESHOOTING FOR THE HARDWARE Messages Displayed on the Touch Panel When a message appears on the touch panel, see the table below to solve the problem. Message Problem Description Corrective Action Close *** cover. The cover indicated by *** is open. Check the cover on the touch panel and close it. Misfeed in *** Paper jam has occurred inside the Remove the jammed paper following the guidance equipment. displayed on the touch panel. P.11 “Clearing a Paper Jam” Check paper size setting on

Summary of the content on the page No. 11

1 TROUBLESHOOTING FOR THE HARDWARE Message Problem Description Corrective Action Examine stapler in the Saddle Stitch Staple jam has occurred in the stapler Remove the jammed staples. unit of the saddle stitch unit. P.50 “Staple jam in the saddle stitch unit” Check staple cartridge in the Saddle No staples are left in the stapler of the Refill the staples. Stitch unit saddle stitch unit. P.59 “Refilling With Staples” Check staple cartridge No staples are left in the stapler of the Refill the s

Summary of the content on the page No. 12

1 TROUBLESHOOTING FOR THE HARDWARE Message Problem Description Corrective Action The number of originals exceeds the The number of originals to be Reduce the number of originals to be scanned, and limits. scanned has exceeded the limit of try again. The scanned data are deleted. 1000 sheets during scanning. (The magazine sort or page number function is used.) The number of originals exceeds the The number of originals to be To print out the data for the originals stored (scanned) limits. sca

Summary of the content on the page No. 13

1 TROUBLESHOOTING FOR THE HARDWARE Clearing a Paper Jam Locating a paper jam The equipment stops copying when the original or copy paper is jammed. Paper jams are notified on the touch panel as follows: Error code Error message Guidance for clearing paper jams Paper jam symbols The paper jam symbol helps you locate the paper jam. 1 2 3 4 5 11 10 9 8 7 6 1. Reversing Automatic Document Feeder (optional) (lower) ( P.13) 2. Reversing Automatic Document Feeder (optional) (upper) ( P.14) 3. Fuser

Summary of the content on the page No. 14

1 TROUBLESHOOTING FOR THE HARDWARE Clearing a paper jam Clear the paper jam 1 Clear the paper jam following the guidance shown on the touch panel. Press or to scroll the pages. After clearing the jam, close all the opened covers. 2 The equipment starts the warm-up. Follow the guidance on the touch panel. Tips on removing the jammed paper Note the following points in removing the jammed paper. Remove the jammed paper carefully so as not to tear it. To avoid tearing the jammed paper, remove th

Summary of the content on the page No. 15

1 TROUBLESHOOTING FOR THE HARDWARE 1.TROUBLESHOOTING FOR THE HARDWARE If paper jams occur frequently The following are the common causes of paper jams. If the problem persists, check for the following situations. An unsuitable original is placed on the Reversing Automatic Document Feeder. Unavailable paper with the equipment is used. Paper sizes are not consistent between the size in a drawer or the bypass tray and the size registered in the equipment. All the jammed paper has not been rem

Summary of the content on the page No. 16

1 TROUBLESHOOTING FOR THE HARDWARE Raise the original feeder tray, and remove the original 5 under the tray. 1 2 Lower the original feeder tray. 6 Close the upper cover. 7 Paper jam in the Reversing Automatic Document Feeder (optional) (Upper) Raise the lever and open the upper cover. 1 2 1 Remove the original. 2 14 Clearing a Paper Jam

Summary of the content on the page No. 17

1 TROUBLESHOOTING FOR THE HARDWARE 1.TROUBLESHOOTING FOR THE HARDWARE Turn the dial to remove the original. 3 Open the transport guide. 4 Raise the guide plate under the transport guide, and 5 remove the original under the guide plate. Close the transport guide. 6 Close the upper cover. 7 Clearing a Paper Jam 15

Summary of the content on the page No. 18

1 TROUBLESHOOTING FOR THE HARDWARE Paper jam in the drawer feeding portion Open the cover of the drawer feeding portion. 1 Remove the jammed paper. 2 If the paper is jammed on the cover side, remove it as shown in the figure on the right. Close the cover of the drawer feeding portion. 3 Paper jam in the Large Capacity Feeder (optional) Open the Large Capacity paper feed cover. 1 16 Clearing a Paper Jam

Summary of the content on the page No. 19

1 TROUBLESHOOTING FOR THE HARDWARE 1.TROUBLESHOOTING FOR THE HARDWARE Remove the jammed paper. 2 Close the paper feed cover. 3 Paper jam in the Paper Feed Pedestal (optional) Open the paper feeder cover of the Paper Feed 1 Pedestal. Remove the jammed paper. 2 Close the paper feeder cover. 3 Paper jam in the bypass tray Move the paper holding lever toward the outside. 1 The paper can now be released. Clearing a Paper Jam 17

Summary of the content on the page No. 20

1 TROUBLESHOOTING FOR THE HARDWARE Pull out the jammed paper in the bypass tray. 2 Place paper on the bypass tray and then move the 3 paper holding lever toward the equipment. Paper jam in the automatic duplexing unit Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing unit. This could injure you. Open the automatic duplexing unit. 1 Remove paper jammed on the paper transport path 2 above the fuser unit. (Only for e-STUDIO355/455)


Similar user manuals
# User manual Category Download
1 Toshiba 2550c All in One Printer 479
2 Toshiba 452 All in One Printer 43
3 Toshiba 2050c All in One Printer 250
4 Toshiba 520T All in One Printer 11
5 Toshiba 600T All in One Printer 18