Summary of the content on the page No. 1
Summary of the content on the page No. 2
INDEX Getting Started............................................................................ 1 Contents of Package ........................................................................... 1 System Requirements ......................................................................... 1 General Precautions ............................................................................ 2 FCC Compliance and Advisory............................................................ 2 Camera Nomenclatu
Summary of the content on the page No. 3
Using a Memory Card ........................................................................ 15 Camera Working Mode...................................................................... 16 Taking Pictures ......................................................................... 17 Previewing a Picture before it is taken............................................... 17 Using the Zoom Feature .................................................................... 19 Digital Zoom Function............
Summary of the content on the page No. 4
Replaying the Last Image Quickly ..................................................... 33 Viewing Pictures in Thumbnail........................................................... 34 Zooming the Displayed Image .......................................................... 35 Erasing Pictures................................................................................. 35 Protecting Pictures against Deletion ................................................. 38 Running a Slide Show (Auto Play) ....
Summary of the content on the page No. 5
Downloading Images to a Computer...............................................54 About the memory storage in this camera. ..................................... 58 Indicator Lamp Reference................................................................. 59 Troubleshooting ................................................................................. 59 Default Setting in Each Camera Working Mode ................................ 61 Specification ................................................
Summary of the content on the page No. 6
Getting Started Getting Started Contents of Package All of the items shown below are included with your camera. Camera USB cable Video cable Strap Alkaline batteries Soft case User's Guide CD-ROM (2 AA-size batteries) System Requirements For Windows PC with processor better than MMX Pentium 166MHz Windows 98/98se/2000/ME/XP Minimum 32MB RAM USB Port CD-ROM drive For Macintosh Mac Power PC or higher Mac OS 9.0 - 10.0 Minimum 32MB RAM USB Port CD-ROM drive 800x600 pixels, 16-bit color display comp
Summary of the content on the page No. 7
Getting Started General Precautions · Do not try to open the case of the camera or attempt to modify this camera in any way. High-voltage internal components create the risk of electric shock when exposed. Maintenance and repairs should be carried out by authorized service providers. · Do not fire the flash near eyes, human or animal. It may cause eye damage especially to children. · Do not use this camera with wet hands. Keep the camera away from water and other liquids. Moisture creates the
Summary of the content on the page No. 8
Getting Started have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. Camera Nomenclature Front Self-timer lamp Flash Viewfinder Lens Exposure sensor Microphone Back Operation lamp Viewfinder Macro / Right button / / Zoom Out button / Zoom In button Flash / Up button Self-timer / Left button button Replay / Down button button
Summary of the content on the page No. 9
Getting Started Side DC IN terminal USB port Video out terminal Battery cover Top Shutter button Mode dial Power button Accessory Set-up Attaching the Wrist Strap · Follow the illustrations to add the wrist strap. NOTE: When carrying the camera by the strap, please don’t swing the camera on the strap. 4
Summary of the content on the page No. 10
Getting Started Using the Soft Case · Keep the camera in its soft case while it is not in use. · Be sure to insert the camera into the case, with the monitor screen facing down. 5
Summary of the content on the page No. 11
Preparing to Take Pictures Preparing to Take Pictures Battery Installation There are two ways to supply power to the camera. You can use batteries (AA Alkaline or CR-V3), or alternatively, you can use an AC adaptor (DC3.3V/2.0A). If using Batteries, 1. Open the battery cover by sliding the door in the direction indicated by the arrow on the battery cover. 2. Check the inscription on the battery chamber for the correct negative/positive installation. 3. Install 2-AA alkaline batteries. 6
Summary of the content on the page No. 12
Preparing to Take Pictures 4. Close battery cover. Low Battery Indicator 1. As the battery runs out of power, the “battery low” indicator shows on the monitor screen. - Power is running out; change the battery. NOTE: · Never use manganese batteries, as they cannot sup- ply sufficient power to support the camera’s operations. · Replace all batteries at the same time to ensure a properly working camera; never mix old and new batteries. · Remove batteries from the camera if you do not plan on using
Summary of the content on the page No. 13
Preparing to Take Pictures · It is normal that the temperature of the camera body rises after extended use. · We suggest using an AC adaptor. If using the AC Adaptor 1. Plug the adaptor into the DC-In jack (DC-IN 3.3V). Please make sure that you use an AC adaptor with the cor- rect specification for the camera (DC3.3V/2.0A). NOTE: · Please be sure to turn off the power before connecting or disconnecting the Adaptor. · The camera automatically switches over to AC adap- tor powered operation when
Summary of the content on the page No. 14
Preparing to Take Pictures Date and Time Set-Up 1. Turn the mode dial to SET mode ( ). 2. Press the DOWN button ( ) until the Date & Time icon ( ) is highlighted. 3.Then press SET button ( ) to DATE&TIME menu. 4. Press the UP/DOWN ( / ) to adjust the value of your setting. 5. Press the LEFT/RIGHT button ( / ) to advance to the next. Use UP/DOWN button to change the date display. A. Y/M/D B. M/D/Y C. D/M/Y 6. Press the SET button ( ) when the OK( ) is highlighed to confirm your set
Summary of the content on the page No. 15
Preparing to Take Pictures Beep Sound Set-Up You may turn on/off the beep sound in the SET mode ( ). 1. Turn the mode dial to SET ( ). 2. Press the DOWN button ( ) until the BEEP icon ( ) is highlighted. 3. Then press the LEFT/RIGHT button ( / ) to select ON/OFF. Press the SET button to confirm your selection. Note: The default setting is “On”. Quick View Setting (LCD Confirm) You can view the picture immediately on the LCD screen right after it is taken by setting the LCD Confirm function ( )
Summary of the content on the page No. 16
Preparing to Take Pictures 2. Press the DOWN button ( ) until the LCD CONFIRM is highlighted. 3. Use the RIGHT/LEFT button to select either YES/NO. Press the SET button to confirm your selection. Auto Power Off Settings You may select the auto power off settings while in the SET mode ( ). 1. Turn the mode dial to SET ( ). 2. Press the DOWN button ( ) until the AUTO POWER OFF icon ( ) is highlighted. / 3. Then press the LEFT/RIGHT button ( ) to select OFF / 1 MIN. / 3MIN. or 5MIN. Press the SE
Summary of the content on the page No. 17
Preparing to Take Pictures Note: The default setting is “1 minute”. 1 minute: This camera will automatically turn off if there is no activity after one minute. Press the Power button to turn on the camera again. 3 minutes: This camera will automatically turn off if there is no activity after three minutes. Press the Power button to turn on the camera again. 5 minutes: This camera will automatically turn off if there is no activity after five minutes. Press the Power button to turn on the ca
Summary of the content on the page No. 18
Preparing to Take Pictures / 3. Then press the LEFT/RIGHT button ( ) to select NTSC/PAL. Press the SET button to confirm your selection. Language Set-Up Use this feature to select the language for the LCD screen. You may choose the language while in the SET mode ( ). 1. Turn the mode dial to SET ( ). 2. Press the DOWN button ( ) until the LANGUAGE icon ( ) is highlighted. / 3. Then press the LEFT/RIGHT button ( ) to select the language you need. 13
Summary of the content on the page No. 19
Preparing to Take Pictures Returning to Default Settings You can easily change the settings back to the default settings. 1. Turn the mode dial to SET ( ). 2. Press the DOWN button ( ) until the DEFAULT SETTING ( ) is highlighted. 3. Press the RIGHT button ( ) to enter the setting. 4. To return to the default setting, use RIGHT button to select “YES”. 5. Press the SET button to confirm the setting. 14
Summary of the content on the page No. 20
Preparing to Take Pictures Using a Memory Card Inserting a SD memory card 1. Slide the battery cover following the arrow direction on the battery door cover (please refer to page 6). 2. You will see the card slot next to the battery house. 3. Insert the SD card into the slot in the direction shown in the illustration. Note: SD cards are sold separately and can be purchased at most computer or electronic stores. Removing a SD memory card 1. Press the memory card into the camera a
