Our goal is to provide you with a quick access to the content of the user manual for FujiFilm FinePix 50i. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with FujiFilm FinePix 50i.
If looking through the FujiFilm FinePix 50i user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual FujiFilm FinePix 50i but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to FujiFilm FinePix 50i. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Software Quick Start Guide
Thank you for purchasing this FUJIFILM product.
This Software Quick Start Guide summarizes the procedure you must follow
to connect your FUJIFILM Digital Camera FinePix50i to a personal computer.
Read this guide carefully to ensure that you use your camera correctly.
Install the FinePix Viewer software
Install Acrobat Reader
/ P.83 / P.16
Set up the cradle
/ P.17 / P.17
To connect the
FinePix50i to your PC
for the first time using
7. LIMITATION OF LIABILITY. IN NO EVENT SHALL FUJI HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS IMPORTANT OR LOST SAVINGS) INCURRED FROM THE USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Be sure to read this page before using the Software. 8. No export. You acknowledge that neither Software nor any part thereof, will be transferred, or export
Windows Macintosh Contents Introduction IMPORTANT ........................................................................................ 2 Glossary of Terms Contents .............................................................................................. 4 Introduction......................................................................................... 5 This section provides explanations of the minimum basic operations you must Glossary of Terms .....................................
Drag & drop MP3 An operation used to move, copy or store files and folders. An abbreviation for MPEG-1 Audio Layer 3. This refers to a format for audio files. Password This is a secret code designed to prevent improper use of your user ID. Type your password when you log in to the server. The first time you log in during the FinePix Internet Service user registration, type in your choice of password using letters or numbers. Ensure that you are not observed as you type in your password. Dr
Windows Starting the Installation Installing the Software 1. The Setup screen appears. Click the [Install Installation Preparations FinePixViewer] button. 1. Switch on your PC and start up Windows. ✽ If you had already switched on your PC, restart your PC at this point. 2. Quit all other active applications until no applications are shown in the taskbar.
Windows 4. Next, install QuickTime. 8. Install the RealJukebox Plug-In for FinePix. If the “Connection speed” window In the “Enter Registration” window, Click the [OK] button. appears, set the correct speed for click the [Next >] button without your type of connection and then entering any data. 9. Install Windows Media Player as directed by the on-screen click the [Next >] button. instructions. ✽ If you do not know your connection NOTE speed, simply click the [Next >] button. In this window, ti
Windows 10. Install Acrobat Reader. ✽ You must install Adobe Systems’ Acrobat Reader software to read the Connecting the Camera to Your Computer FinePixViewer User’s Guide (PDF). 1 Open the “My Computer” window, right-click the CD-ROM icon and select “Open” to view the contents of the CD-ROM. Setting up the Cradle 2 Double-click “SETUP” or “SETUP.exe”. To connect your camera to a PC, you must use the cradle. You also use the 3 In the installer window, click the [Install Acrobat Reader] button. c
Windows Card Reader (DSC) Connection – Viewing Images and Downloading Audio Files – Removing the Camera from the Cradle (Card Reader Connection) 1. Load the SmartMedia. 1. Exit FinePixViewer. NOTE 2. Check that the CHARGE/ACCESS lamp (red) on the cradle is To download music, you must use a SmartMedia with ID. not flashing. 2. Remove the connection socket cover on the side of the camera. ✽ When you remove the camera from the cradle to take pictures, replace the red connection socket cover on the
Windows PC Camera Connection – Videoconferencing (Windows) and Capturing Video – Removing the Camera from the Cradle (PC Camera Connection) 1. Remove the connection socket cover on the side of the 1. Exit FinePixViewer or VideoImpression. camera. 2. Check that the CHARGE/ACCESS lamp (red) on the cradle is ✽ When you remove the camera from the cradle to take pictures, replace the not flashing. connection socket cover on the camera to prevent dust buildup on the socket. Take care not to lose the c
Windows Windows 98/98SE Installing the Mass Storage Driver 7. The “Add New Hardware Wizard” dialog appears. Click the [Next >] button. Installing Mass Storage Driver allows you to transfer files recorded on the camera to your PC. NOTE If the dialog box does not appear, uninstall If an older version of the USB Mass Storage Driver is already installed on (See P.63) and then re-install the Mass your PC, use the software on the enclosed CD-ROM to uninstall the old Storage Driver. (See P.22.) versio
Windows 10. Check that USBS04CB.INF Windows Millennium Edition (Windows Me) has been detected and then 7. The “Add New Hardware Wizard” dialog opens. Click the click the [Next >] button. [Next >] button. NOTE NOTE The Windows 98 CD-ROM may also be required during installation. In this event, • It may take a few minutes for the dialog box shown at right to appear after USB Mass switch CD-ROMs as directed by the on- Storage is detected. screen instructions. • If the dialog box does not appear, uni
Windows 10. The “New Hardware Found” dialog box appears. Wait until Windows 2000 Professional the dialog box closes. 7. The “Found New Hardware Wizard” dialog opens. Click the [Next >] button. NOTE If the dialog box does not appear, uninstall (See P.63) and then re-install the Mass 11. FinePixViewer automatically starts up and displays the Storage Driver. (See P.22.) images on the SmartMedia. NOTE If FinePixViewer does not start up, check that a new removable disk icon (the connected camera) has
Windows 10. Check that USBS04CB.INF has been detected and then Installing the PC Camera Driver click the [Next >] button. Installing PC Camera Driver allows you to import live images from the camera. ✽ Use PictureHello (see P.46) or VideoImpression (see P.52) to actually view live images. ✽ Here, “live images” refers to the video images shown on the LCD monitor when the camera is set to photography mode. NOTE The Windows CD-ROM may also be required in some cases. Have the CD-ROM ready beforehand
Windows 9. Check that VC4CB104.INF Windows 98/98SE has been detected and then 6. The “Add New Hardware Wizard” dialog appears. Click the click the [Next >] button. [Next >] button. NOTE NOTE The Windows 98 CD-ROM may also be required during installation. In this event, If the dialog box does not appear, uninstall switch CD-ROMs as directed by the on- (See P.63) and then re-install the PC screen instructions. Camera Driver. (See P.29.) 10. Click the [Finish] button. 7. Select “Search for the best
Windows Windows Millennium Edition (Windows Me) Windows 2000 Professional 6. The “Add New Hardware Wizard” dialog opens. Click the 6. The “Found New Hardware [Next >] button. Wizard” dialog opens. Click the [Next >] button. NOTE NOTE • It may take a few minutes for the dialog box shown at right to appear after USB If the dialog box does not appear, uninstall PC Camera is detected. (See P.63) and then re-install the PC • If the dialog box does not appear, Camera Driver. (See P.29.) uninstall (See
Windows 10. When the “Digital Signature Not Found” message The User’s Guide (PDF) and How to Read It appears, click the [Yes] button. To read the FinePixViewer User’s Guide (PDF), you must have Adobe Systems’ Acrobat Reader installed on your computer. See P.16 for NOTE information on installing Acrobat Reader. The Windows 2000 Professional CD-ROM may also be required during installation. In Reading the User’s Guide this event, switch CD-ROMs as directed by the on-screen instructions. 1. Select
Windows If you are not running Exif Launcher Using the Software on Windows Select “Programs” / “FinePixViewer” / “FinePixViewer” in the “Start” menu. FinePixViewer then starts up. Connecting the Camera and PC and Viewing Images
Windows Saving Camera Images on Your PC and Checking the Details Deleting Images 1. Click the “Automatic Save” button. 1. Select the images to be deleted. A folder with the date the shots were taken (“2001_0702” etc.) is created in the TIP FinePixViewer installation folder and the images are saved in the new folder. You can select multiple images by holding down the Shift key or Ctrl key as you click the images. 2. Press the “Delete” key on the keyboard. 3. Click the [OK] button in the confirm
|1||FujiFilm 16010734||Digital Camera||79|
|2||FujiFilm 16138445||Digital Camera||14|
|3||FujiFilm 16138665||Digital Camera||31|
|4||FujiFilm 16010710||Digital Camera||31|
|5||FujiFilm 16000480||Digital Camera||14|