Our goal is to provide you with a quick access to the content of the user manual for FujiFilm FinePix F610. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with FujiFilm FinePix F610.
If looking through the FujiFilm FinePix F610 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual FujiFilm FinePix F610 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to FujiFilm FinePix F610. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Using Advanced Software
Getting Ready Settings Viewing Images
the Camera Features Installation
This manual will show you how to use your FUJIFILM
DIGITAL CAMERA FinePix F610 correctly.
Please follow the instructions carefully.
Warning EC Declaration of Conformity To prevent fire or shock hazard, do not expose the unit to rain or moisture. We : ( ) Name Fuji Photo Film Europe G.m.b.H. to correct the interference by one or more of the following For customers in the U.S.A. Address: Heesenstrasse 31 measures: Tested To Comply — Reorient or relocate the receiving antenna. 40549 Dusseldorf, Germany With FCC Standards — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a c
Using Advanced Software Getting Ready Settings Viewing Images the Camera Features Installation Contents .................................................................................................................................... b Red-Eye Reduction 46 .......................................................................... ..................................................... Warning 2 Attaching the strap 9 ...............................................................................
Preface Accessories included Test Shots Prior to Photography Notes on Electrical Interference h NP-40 Rechargeable Battery (1) h AC-5VW AC Power Adapter (1 set) For particularly important photographs (such as If the camera is to be used in hospitals or aircrafts, Soft case included weddings and overseas trips), always take a test please note that this camera may cause interference photograph and view the image to make sure that the to other equipment in the hospital or aircraft. For camera i
Nomenclature ✽ Refer to the pages in parentheses for information on using the camera features. Attaching the strap Mode dial Manual (P.39) Programmed Auto (P.40) Attach the strap as shown in 1 and 2. 0 1 2 0 Shutter-Priority Auto (P.41) Movie (P.67) Aperture-Priority Auto (P.42) AUTO (P.38) Scene Position (P.38) Manual (P.43) ✽The dial cannot be turned to “ , , , ”. Flash (P.45) Shutter button Example of LCD Monitor Text Display Flash control sensor Still photography mode Qual
Getting Ready 1 Getting Ready LOADING THE BATTERY AND THE MEDIA Close the battery cover. Compatible Batteries 4 Use only the special Rechargeable Battery NP-40. The use of other brands of rechargeable battery could cause faults or damage to the camera. h Rechargeable Battery NP-40 (1) ! The battery is not fully charged at shipment and must be fully Terminals charged before being used. ! Do not stick labels onto the battery as this could cause the Indicator battery to become jammed inside the
Getting Ready CHECKING THE REMAINING BATTERY CHARGE CHARGING THE BATTERY Switch the camera on and check whether one of the battery level warnings (X, C or V) is displayed on the LCD monitor. If nothing is displayed, the battery has sufficient charge. DC IN 5V 1 (power input) socket 1There is ample remaining battery charge. (Only displayed for approximately 3 seconds when the Lit white 1 1 camera is switched on or the mode is changed.) 2 2 Lit white 2The battery is approximately half charged. (On
Getting Ready SWITCHING ON AND OFF/SETTING THE DATE AND TIME CORRECTING THE DATE AND TIME/CHANGING THE DATE ORDER Slide the Power switch to turn the camera on and 1Press the “MENU/OK” button. 1 00 3 0 2 off. When you switch the camera on, the viewfinder 2Press “d” or “c” to select “F” OPTION and 1 1 lamp lights (green). then press “a” or “b” to select “SET–UP”. 3Press the “MENU/OK” button. In “q” mode, the lens extends and the lens cover opens. Because these actions involve precision mecha
Getting Ready SELECTING THE LANGUAGE SETTING UP AND USING THE FinePix F610 CRADLE CP-FX610 Just by putting the camera in the cradle, you can ensure that your camera is always charged. The 1Press the “MENU/OK” button to display the 1 03 0 0 2 cradle will also automatically launch the “FinePixViewer” image viewing software when you switch menu screen. 1 the cradle on. You can then display thumbnail lists of your photographed images on your computer 2Press “a”, “b”, “d” or “c” to select “SET–UP” f
Getting Ready SETTING UP AND USING THE FinePix F610 CRADLE CP-FX610 ( ) USB cable included Connecting to a computer Push the plug firmly all the way into the USB Pressing the POWER switch on the cradle switches socket, taking care to plug the correct end of the the camera on. This initiates the connection to the cable into the socket. computer. See P.84 for details. ! Install the software first. ! Taking care to plug the correct end of the cable into the USB (USB)socket PC Before you connect
Using the Camera Using 2 the Camera BASIC OPERATION GUIDE You’ve read the chapter on getting ready and the camera is now set up and ready to take pictures. 0 g button “Using the Camera” describes the basic camera operations of “Taking Pictures”, then “Viewing Images” and “Erasing Images”. Photography: Changes the page on the display panel. Playback: Change frame. This section describes the camera’s functions. 0 Photography mode selector You can select the photography mode by turning the Mode d
Using the Camera STILL PHOTOGRAPHY MODE STILL PHOTOGRAPHY MODE ( ) SHOOTING STILL IMAGES B AUTO MODE Set the Power switch to “q” 1 and set the Mode To zoom in on the subject, press “a” ([ telephoto). 1 0 0 2 dial to “B” 2. To zoom out, press “b” (] wide-angle). When you 1 6 do this, the “zoom bar” is displayed on the LCD h Photography range monitor. Approx. 60 cm (2.0 ft.) to infinity h Focal length of the optical zoom ! For subjects closer than 60 cm (2.0 ft.), use Macro photography (35 mm c
Using the Camera STILL PHOTOGRAPHY MODE ( ) SHOOTING STILL IMAGES B AUTO MODE USING THE VIEWFINDER TO TAKE PICTURES H FOCUSING MODE To take pictures using the viewfinder, press the This mode can only be selected in “B ” “DISP” button to switch the LCD monitor off photography mode for shots taken using the LCD 1 (Switching the LCD monitor off conserves power). monitor. Each time the “T” button is pressed, the focusing mode switches between “I” (AF (MULTI)) and “O” (AF (CENTER)). ! The
Using the Camera STILL PHOTOGRAPHY MODE ( ) SHOOTING STILL IMAGES B AUTO MODE ( ) USING AF/AE LOCK USING THE ZOOM OPTICAL ZOOM/DIGITAL ZOOM In shots composed in this way, the camera may be Press “a” or “b” to zoom in or out. unable to focus on the subject (the 2 women in this 1 The digital zoom can be used with the “5”, “3”, case). Set the focusing mode (➡P.25) to “O” (AF “2” and “1” quality mode setting. (CENTER)). When zooming switches between optical and digital, the “” indicator stops. Pres
Using the Camera PLAYBACK MODE ( ) VIEWING YOUR IMAGES wPLAYBACK Single-frame Playback Playback Zoom 1 0 2 0 Playback zoom allows you to check the details of pictures you have taken and adjust the area 1Set the Power switch to “w”. during trimming. 2Press “c” to scan forward through your images and “d” to scan backwards. During single-frame playback, you can zoom in ! When you set the Power switch to “w”, your last shot is (enlarge the image) by pressing “a ([)” or zoom 1 played back. out by p
Using the Camera PLAYBACK MODE PLAYBACK MODE ( ) ( ) VIEWING YOUR IMAGES wPLAYBACK ERASING IMAGES oERASE FRAME 1Set the Power switch to “w”. Trimming 0 1 0 2 2Press “d” or “c” to select the frame (file) to be 1 After playback zoom has been used to adjust the area to be viewed, the image can be saved as a erased. separate file. Mistakenly erased frames (files) cannot be Use playback zoom to adjust the area to be viewed recovered. Take care when erasing frames (files). (➡P.29). 1 Playback zoom Cop
Advanced Features p PHOTO MODE STILL IMAGE/MOVIE Advanced p PHOTO MODE STILL IMAGE ( ) 3 Features y QUALITY MODE NUMBER OF RECORDED PIXELS S SENSITIVITY 1Set the Power switch to “q”. 1Set the Power switch to “q”. 1 0 0 2 0 1 0 2 2Set the Mode dial to Still Photography mode or 2Set the Mode dial to Still Photography mode. 1 1 Movie mode. 3Press the Photo mode “p” button. 3Press the Photo mode “p” button. 3 0 3 0 ! In “r” Movie mode, you cannot set the ISO (sensitivity) setting. The quality
Advanced Features p PHOTO MODE STILL IMAGE p PHOTO MODE STILL IMAGE S SENSITIVITY J FinePix COLOR 1Set the Power switch to “q”. y Quality mode and S sensitivity settings 1 0 0 2 2Set the Mode dial to Still Photography mode. If a high-sensitivity setting (800) is selected, the quality setting may be automatically changed. When 1 the sensitivity is set to “AUTO”, “160”, “200” or “400”, check the quality setting and, if necessary, reset it 3Press the Photo mode “p” button. (➡P.32). When the
Advanced Features NIGHT SCENE SPORTS LANDSCAPE PORTRAIT STILL PHOTOGRAPHY FUNCTIONS TAKING PICTURES — SELECTING THE CAMERA SETTINGS Consider the scene you are photographing and the sort of image you want to List of Functions Available in Each Mode achieve when you specify the camera settings. A general guide to the procedure ?s Photography mode is given below. m , . / B r NM<> Select the Photography mode (➡P.38-43, 67, 68). 1 Function All settings other than the Image quality, ISO sensitivity
Advanced Features STILL PHOTOGRAPHY FUNCTIONS STILL PHOTOGRAPHY FUNCTIONS B AUTO/? SCENE POSITION s MANUAL Set the Mode dial to “s”. AUTO B 1 Set the Mode dial to “B”. This is the easiest mode to use and can be used for most types of shot. The “s” manual photography mode changes each time the “T” button is pressed. 2 ? SCENE POSITION Set the Mode dial to “?”. This mode provides options tailored to different 1 types of scenes. You can choose from 4 types of scenes (m, ,, .
|1||FujiFilm 16010734||Digital Camera||80|
|2||FujiFilm 16138445||Digital Camera||14|
|3||FujiFilm 16138665||Digital Camera||33|
|4||FujiFilm 16010710||Digital Camera||32|
|5||FujiFilm 16000480||Digital Camera||29|