Summary of the content on the page No. 1
DUAL MODE DIGITAL CAMERA
DUAL-MODUS-DIGITALKAMERA
APPAREIL PHOTO NUMERIQUE DOUBLE MODE
CÁMARA DIGITAL DE MODO DUAL
DUAL MODE DIGITAL CAMERA
DIGITALKAMERA MED TVÅ LÄGEN
GC-A33
For Customer Use:
INSTRUCTIONS
Enter below the Model No. and Serial No.
which is located on the bottom of cabinet.
BEDIENUNGSANLEITUNG
Retain this information for future reference.
MANUEL D’INSTRUCTIONS
Model No.
MANUAL DE INSTRUCCIONES
Serial No.
GEBRUIKSAANWIJZING
BRUKSANVISNING J5500-107A
Summary of the content on the page No. 2
“SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical apparatus, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the plug, extension cord and inter-connections between pieces of equipment) are properly made and in accorda
Summary of the content on the page No. 3
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harm
Summary of the content on the page No. 4
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. AVERTISSEMENT: POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL À LA PLUIE NI À L’HUMIDITÉ. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol,
Summary of the content on the page No. 5
Thank you for purchasing this JVC product. Before you begin operating this unit, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer. ENGLISH INSTRUCTIONS ................................................... Page 2 – 22 Mit dem Kauf dieses JVC Produkts haben Sie eine gute Wahl getroffen. Um lhren Kopfhörer optimal nutzen zu können, sollten Sie die vorliegende Anleitung vor lnbetriebnahme des Geräts sorgfältig
Summary of the content on the page No. 6
CAUTIONS About moisture condensation . . . You may have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass’ outer surface. This same phenomenon occurs on the lens of the camera when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner. Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult
Summary of the content on the page No. 7
Alkaline Battery 1. For safety, DO NOT . . . .... attempt to charge the alkaline battery. .... carry or store a battery with objects such as metal pens, necklaces, coins or hairpins. this could short circuit the positive and negative poles of the battery. .... heat or attempt to disassemble a battery. .... place a battery in water or in a fire. .... subject a battery to strong impacts, such as hitting it with a hammer, stepping on it or dropping it. Any of these may cause the battery to split
Summary of the content on the page No. 8
CONTENTS Fun Things You Can DO 9 Features 9 What’s Inside ........................................................................................................... 9 System Requirements (PC) ................................................................................... 9 Getting to Know the Camera 10 Getting Started 11 Inserting Batteries ................................................................................................ 11 Attaching the Hand Strap ...........................
Summary of the content on the page No. 9
This camera is an all-in-one pocket size digital and USB PC-camera. You can take digital pictures in an instant. You can also hook the camera to a computer and use it as a PC-camera for videoconferencing. Fun Things You Can Do ● Take digital pictures. Easily capture digital images and download them to your computer. ● Videoconference on the Internet. Keep in touch with distant family and friends. See and talk with people on the Internet face-to-face. ● Send image with e-mail. Send your captured
Summary of the content on the page No. 10
Getting to Know the Camera Shutter button Viewfinder window Built-in flash Self-Timer indicator Lens Strap holder EV (Exposure Value)/Forward button Status light indicator Viewfinder Power button Mode/Menu button LCD panel USB port Flash/Backward button Battery door Tripod socket EN-10
Summary of the content on the page No. 11
Getting Started Before you start taking digital pictures with your camera, insert the (AA-size Alkaline) batteries. When you use your camera as a video camera for your PC, you won’t need batteries. The camera absorbs power from your computer through the USB port. Inserting Batteries 1. On the bottom of the camera, slide the battery door in the direction indicated by the arrow to open it. 2. Insert two (2) AA-size batteries as indicated on the inner side of the battery door. 3. Close the battery
Summary of the content on the page No. 12
Attaching the Hand Strap Use the included hand strap every time to carry the camera and when taking pictures outdoors. To attach the strap to your camera: 1. Insert the small loop at the end of the strap into one of the holes of the camera’s strap holder. 2. Push inward until the loop comes out of the other hole of the camera’s strap holder. 3. Insert the other end of the strap through the loop and pull it all the way until the strap is securely attached to the camera. Note When using the hand s
Summary of the content on the page No. 13
If you want to take more pictures, first look at the number shown on the LCD panel. This is the number of image shots left. As more pictures are taken, the number decreases. When it reaches zero, that means your digital camera is already full of images. If this happens, download the images into your computer and save them for later use. Then, erase all images from the camera’s memory so that you can take more pictures. (See also “Downloading Pictures into Your PC”.) Status Light Indicator The st
Summary of the content on the page No. 14
Camera Options in Record Mode When you have set your camera to Record mode, you can control and change the following settings: ● Image quality settings You can set the image quality setting to either Normal or Fine quality. Normal Quality — This is the acceptable image quality for digital pictures. At Normal quality, you can take a maximum of 120 pictures with the camera. Fine Quality — Captures images at the best possible quality. If you select this option, you can take 60 pictures at the most.
Summary of the content on the page No. 15
Adjusting the Settings in Record Mode The camera options listed in the previous section allow you to control how you want pictures to be taken and how to manage the pictures in the camera’s memory. To change one or more camera options, here’s what you should do: 1. Press the Mode/Menu button for over 2 seconds before releasing it. 2. Each option appears (shown by a continuous blinking) on the LCD panel one at a time. To go to the next option, press the Mode/Menu button and release it instantly
Summary of the content on the page No. 16
To set the Self-Timer: 1. Make sure that the camera is in Record mode. Then, press the Mode/Menu button for over 2 seconds to enter the camera options in Record mode. 2. Keep on pressing the Mode/Menu button repeatedly until blinks on the LCD panel. 3. Press the Shutter button to select the option. Setting the Auto Flash Mode The camera has two different flash modes: ● Off (default) : The flash is disabled no matter what the ambient brightness of the surroundings is. ● Auto : The camera aut
Summary of the content on the page No. 17
Deleting Pictures from Memory There are times when you don’t want the pictures you’ve taken because they’re not what you wanted. In such case, you can simply delete them from memory. To delete a picture from memory 1. Make sure that you are in Delete mode. To enter Delete mode, press the Mode/Menu button twice instantly and release the button. The Delete Current Picture icon appears on the LCD panel. 2. Use the EV / + or the /- button located at the back of the camera to select the number of t
Summary of the content on the page No. 18
Downloading Pictures into your PC Once you have your camera connected to your computer, the next step is to transfer the pictures contained in the camera memory to your computer’s hard disk. Before you start download the pictures, you need to install first the appropriate camera driver and image editing software. Camera Driver and Application Installation The appropriate TWAIN driver and application are required in order to download images from the digital camera to your computer. You need to in
Summary of the content on the page No. 19
Downloading and Saving Images to your Hard Disk Once you have TWAIN driver and image application software installed on your PC, use the following procedures to transfer pictures from the camera to your computer’s hard drive and save them. (The following procedure is the case when using MGI PhotoSuite III SE.) 1. Make sure your camera is set to PC Mode. 2. Launch the image application. 3. Click Get. 4. Click Digital Camera (TWAIN). 5. Select Dual Mode USB Camera for the TWAIN device. 6. Click Dow
Summary of the content on the page No. 20
Using your Camera as a PC-Camera (WebCam) Aside from taking pictures, you can also use your camera as a PC-Camera (WebCam). Using your camera as a PC-camera (WebCam) with Microsoft Netmeeting: 1. Make sure you have installed the Dual Mode USB camera driver (refer to page 18). 2. Connect a USB cable to the camera and to your PC’s USB port. 3. Press the Power button to turn on the camera. 4. Set the camera to PC mode. 5. Launch your PC-Camera (WebCam) Application Software. 6. Follow the instructio
