Our goal is to provide you with a quick access to the content of the user manual for Kodak T500. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Kodak T500.
If looking through the Kodak T500 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Kodak T500 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Kodak T500. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
T500 Auto Focus
Camera Identification 3 2 1 4 5 6 7 8 Kodak
OPEN Camera Identification 12 11 13 14 10 9 15 16 17 18 21 20 19
LCD Panel 22 23 24 25 B F ISO 26 OFF FILL AUTO 36 27 + 28 34 35 33 31 30 29 32
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Your model camera has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits provide reasonable protection against interference in residential u
KODAK ADVANTIX T500 Auto Focus Camera Welcome to the innovative world of the Advanced Photo System! And thank you for buying this KODAK ADVANTIX Camera. NEED HELP WITH YOUR CAMERA? Go to our web site at http://www.kodak.com or call: Kodak (USA only) from 9:00 a.m. to 7:00 p.m. (Eastern time) Monday through Friday at 1 (800) 242-2424. Kodak (Canada only) from 8:00 a.m. to 5:00 p.m. (Eastern time) Monday through Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area, call (416) 766-8233, ext
ADVANCED PHOTO SYSTEM FEATURES AVAILABLE WITH THIS CAMERA Double exposure protection (DEP) Triple format selection • You don’t need to worry about accidentally • You can take three different size re-exposing your film. Your camera reads pictures: Classic (C), Group/HDTV (H), the Film Status Indicator (FSI) on the film and Panoramic (P) pictures from the cassette to prevent re-exposure. same film cassette. The viewfinder frame changes to match each format selection. Picture quality information ex
Look for this logo to be certain that the film you buy is made for this camera. Look for this logo to select a certified photofinishing service for developing your film and to assure that you get all the features of the Advanced Photo System. Film Status Indicator (FSI) UNEXPOSED A highlighted indicator advances from one symbol to another to identify the status of the film inside the cassette. PARTIALLY EXPOSED FULLY EXPOSED PROCESSED NEGATIVES 3 1 2 4 3
CONTENTS CAMERA IDENTIFICATION ................. 5 USING THE SELF-TIMER ................. 14 ATTACHING THE STRAP .................... 6 DATE AND TIME IMPRINTING .......... 15 Setting the date and time ............... 15 LOADING THE BATTERY .................... 6 Low-battery indicator ........................ 6 SETTING THE LANGUAGE ............... 16 Battery tips ....................................... 7 PRINT TITLE IMPRINTING ................ 16 Power shut-off ..................................
CAMERA IDENTIFICATION (see inside cover flaps for camera diagrams) 1 SHUTTER BUTTON LCD Panel 2 ON/OFF BUTTON 22 DATE/TIME DISPLAY 3 FORMAT-SELECTOR SWITCH 23 BACK- /FRONT-PRINTING INDICATOR 4 FLASH 24 ISO FILM-SPEED DISPLAY 5 SELF-TIMER LAMP 25 TITLE-SELECT INDICATOR 6 METER-CELL WINDOW 26 RED-EYE-REDUCTION INDICATOR 7 LENS 27 NIGHT-VIEW INDICATOR 8 STRAP POST 28 BATTERY SYMBOL 9 FLASH/CAMERA-READY LAMP 29 SELF-TIMER INDICATOR 10 VIEWFINDER EYEPIECE 30 FILL-FLASH INDICATOR 11 LCD PANEL 31 INFI
ATTACHING THE STRAP LOADING THE BATTERY 1. Insert the shorter This camera uses one 3-volt lithium looped end of the KODAK KCR2 (or equivalent) Battery that strap behind the supplies power for all camera operations. STRAP POST (8). 1. Open the BATTERY 2. Thread the longer end DOOR (19). of the strap through • Before you remove the shorter loop. the old battery, turn the camera off. 3. Pull the strap tight. 2. Insert the battery into the chamber as shown. 3. Snap the battery door closed. • After y
Battery tips LOADING THE FILM • Remember to keep a spare battery with You can load film into the camera with the you at all times. camera ON or OFF. • Read and follow all warnings and 1. Turn the camera instructions supplied by the battery manufacturer. upside down and move the FILM-DOOR • Keep batteries away from children. SWITCH (17) to open • Do not try to take apart, recharge or short the FILM DOOR (15). circuit the battery, or subject it to high • The safety temperature or fire. interlocked
P H C 3. Close the film door to start the auto-film TAKING PICTURES advance. The FRAME COUNTER (35) on the You can take Classic (C), Group/ LCD PANEL (11) will show the number HDTV (H)*, and Panoramic (P) pictures on of frames remaining on the film cassette. the same film cassette. Your photo- processing cost may be based on the format size(s) that you use to expose the film. 1. Press the ON/OFF BUTTON (2) to open the lens cover and to turn the camera ON. 2. Move the FORMAT-SELECTOR SWITCH (3) t
3. Frame your subject within the VIEWFINDER Using the focus lock EYEPIECE (10). For a sharp picture, stand This camera automatically focuses on at least 1.3 ft (0.4 m) from your subject. whatever is within the auto-focus (AF) circle 4. Partially depress the of the viewfinder eyepiece. To get a sharp SHUTTER BUTTON (1). picture, make sure the AF circle is on your When the FLASH/ main subject. If you want to take a picture CAMERA- with the subject positioned outside of the READYLAMP (9) glows AF c
2. Partially depress and hold the SHUTTER TAKING FLASH PICTURES BUTTON (1) to lock the focus position. In dim light, such as indoors or outdoors in 3. While still partially heavy shade, or on dark overcast days, you depressing the need flash. Your camera features an shutter button, automatic flash that fires when you need it. move the camera 1. Press the ON/OFF BUTTON (2) to open the until your subject lens cover and to turn the camera ON. is where you want it within the 2. Frame your subject wi
Flash/warning-lamp signals SELECTING THE FLASH AND Lamp Indicator Situation INFINITY-FOCUS MODES Glows green Flash fully charged Besides the auto-flash with red-eye- “Blinks” green Camera shake warning* reduction mode, you can Glows red Subject closer than select auto-flash without 1.3 ft (0.4 m)* red-eye reduction, fill “Blinks” red Flash not fully charged* EXP LEFT flash, flash off, night- DATE SELECT ENTER * See TROUBLESHOOTING table for more information. view, and infinity-focus modes. TITLE
1. Press the ON/OFF BUTTON (2) to open the 3. Frame your picture in the VIEWFINDER lens cover and to turn the camera ON. EYEPIECE (10). 2. Press the SELECT/FLASH BUTTON (20) 4. Press the SHUTTER BUTTON (1) to take repeatedly until the RED-EYE-REDUCTION the picture. INDICATOR (26) appears on the • The camera will now default to the auto- LCD PANEL (11). flash mode without red-eye reduction. • Disregard step 2 if the default setting is FILL Fill flash already set for red-eye reduction. 3. Frame yo
OFF Flash off Night-view When you do not want to use the flash, In this mode, the camera balances the especially indoors where flash is prohibited, flash and existing light exposure so you such as in theaters and museums, or when can take beautiful pictures of people at you want to take twilight scenes or distant sunset or at night. Use a tripod or place subjects that are beyond the flash range, or the camera on another firm support, and capture the ambiance of existing light, use use high-speed
Infinity focus USING THE SELF-TIMER In this mode, you can capture sharp, distant scenery when you take pictures Use this feature to include yourself outdoors. in pictures. 1. Press the ON/OFF BUTTON (2) to open the 1. Use the TRIPOD SOCKET (21) to attach the lens cover and to turn the camera ON. camera to a tripod or place it on another 2. Press the SELECT/FLASH BUTTON (20) firm support. repeatedly until the INFINITY-FOCUS 2. Press the ON/OFF BUTTON (2) to open the INDICATOR (31) appears on the
2. Press and hold the date button until the DATE AND TIME IMPRINTING first number(s) in the date-option Traditional cameras print date and/or time mode “blinks.” information directly onto the film. Your 3. Press the SELECT/FLASH camera uses the film’s magnetic data- EXP LEFT BUTTON (20) to change recording capability to record date and time DATE SELECT ENTER the number(s). information which your photofinisher can imprint on the back and front or back only of TITLE 4. Press the ENTER/SELF- your p
|1||Kodak 1278829||Digital Camera||26|
|2||Kodak 1687060||Digital Camera||16|
|3||Kodak 1710722||Digital Camera||31|
|4||Kodak 1500628||Digital Camera||35|
|5||Kodak 1759836||Digital Camera||34|