Our goal is to provide you with a quick access to the content of the user manual for Olympus C-1 D-150. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Olympus C-1 D-150.
If looking through the Olympus C-1 D-150 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Olympus C-1 D-150 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Olympus C-1 D-150. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
APPAREIL PHOTO NUMÉRIQUE
C C 1 1
- - MANUEL DE BASE
D D 15 150 0
D D 15 150 0Zoom
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan
ENGLISH ( Pages 2 to 37 )
(Customer support) Tel. 0426-42-7499 Tokyo
FRANÇAIS ( Pages 38 à 73 )
OLYMPUS AMERICA INC.
DEUTSCH ( Seite 74 bis 109 )
Two Corporate Center Drive,
2 147 Read the Following Before Use This section provides important information about using this digital camera. Before using the camera, please be sure to read the following. About this manual The information contained in this manual may be subject to change without notice. For the latest information on the product names, model numbers, etc., please consult authorized Olympus service center. The information contained in this manual has been compiled by taking all possible measures to ensur
3 Declaration of Conformity Model Number: D-150Zoom Trade Name: OLYMPUS Responsible Party: Olympus America Inc. Address: 2 Corporate Center Drive, Melville, New York 11747-3157 USA Telephone Number: 631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including i
4 CONTENTS Read the Following Before Use 2 PREPARATION Names of Parts 5 Attaching the Provided Strap 7 Inserting the Memory Card (SmartMedia) 7 Loading the Battery 8 Setting the Date and Time 9 SHOOTING OPERATIONS Shooting Pictures 10 Shooting Using the Monitor 11 Deciding Whether to Use the Viewfinder or Monitor According to Working Distance 11 Checking the Camera Status Indication Next to the Viewfinder or on the Monitor (in Shooting Mode) 12 Selecting the Image Quality (Record Mode) 15 Using
5 REPARATION P Names of Parts Zoom lever Shutter button Card cover (For insertion and removal of the SmartMedia card) Connector cover Lens barrier (Open this to turn the camera on in the Shooting mode) Card cover USB connector Strap eyelet (Connect to a PC with a USB cable) Video output jack (Connect to a TV with a video cable) DC IN jack (Connect the AC adapter) Tripod socket (Attach the tripod here) Battery compartment cover
6 Self-timer lamp (Indicates activation of the self-timer) Flash (Pops up automatically when you open the lens barrier. Push it down after you close the lens barrier) Viewfinder Lens (Comes out automatically when you open the lens barrier) Viewfinder eyepiece AF target mark (Position this over the subject you want to focus on) Orange lamp (For checking flash charging/emission) (Blinks while the card is being accessed) Green lamp (For checking autofocus status) (Turns on the camera is conne
7 Attaching the Provided Strap 1. Attach the strap as shown. Inserting the Memory Card (SmartMedia) 1. Make sure the lens barrier is closed and nothing is displayed on the monitor. 2. Open the card cover. 3. Insert the card in the direction shown in the figure. 4. Close the card cover until it clicks. Card insertion direction marking CAUTION .................................................................................. Be sure to hold the card so that the cut corner is positioned corr
8 Loading the Battery 1. Make sure the lens barrier is closed and nothing is displayed on the monitor. 2. Slide the battery compartment cover in the direction of the arrow , and lift the cover in the direction of the arrow . 3. Insert the battery in the direction shown in the figure. 4. Close the battery compartment cover in the direction of the arrow , and press the cover in the direction of the arrow until it clicks. This camera can be powered by a single long-life lithium battery pack
9 Arrow pad Setting the Date and Time 1/3 NO OFF Operating Procedure NO NO 1. Check that the camera is set to the OK SELECT SET Playback mode by holding down the monitor button for a moment. Playback mode menu 1/3 screen OK/menu button 2. Press the OK/menu button. The Playback mode menu 1/3 is displayed on the monitor. 3/3 3. Press the or arrow pad key to display the menu 3/3, and select . SELECT END OK 4. Display the date/time setting menu by Playback mode menu 3/3 screen pressing the or
10 HOOTING OPERATIONS S Shooting Pictures Operating Procedure 1. Open the lens barrier until the flash pops up. The camera turns on, and the lens comes out. 2. Hold the camera, and look through the viewfinder. 3. Press the shutter button halfway (half-press) to make sure the green lamp on the right of the viewfinder lights. When lights : The subject is in focus. You can shoot. When blinking : The subject is out of focus. Half-press the shutter button again. Green lamp 4. Press the shutt
11 Shooting Using the Monitor Operating Procedure 1. Check that the lens barrier is open. 2. Press the monitor button. The monitor turns on. 3. Determine the image composition by observing your subject in the monitor. 4. Half-press the shutter button to focus on the subject, Monitor and then press it all the way to take the picture. Monitor button (This operation is identical to the Shooting Using the Viewfinder). The orange lamp on the right of the viewfinder blinks for a moment while th
12 Checking the Camera Status Indication Next to the Viewfinder or on the Monitor (in Shooting Mode) Operating Procedure 1. Check that the lens barrier is open. 2. Half-press the shutter button. Orange lamp The lamps on the right of the viewfinder Green lamp light or blink. Viewfinder 1 Indication lamps on the right of the viewfinder Lamp Status Camera Status Meaning/Note When the green Press the shutter button all Autofocus is locked. lamp is lit the way to take the picture. The camera c
13 2 Monitor When the monitor is turned by pressing the monitor button, the information displays on the left are shown on the monitor. T HQ W No. of images that Shows the approximate number of images you can shoot. can be shot Battery status (Green) Remaining battery power is insufficient. (The display goes out automatically.) The remaining battery power is too low. Replace the batteries with (Red) new ones. Shooting is possible when the batteries are low, but battery power could run out while
14 Exposure Shows the amount of exposure compensation. 2 + 1.0 compensation* The default setting is no exposure compensation. Shows that the Macro mode is switched on. 2 Macro mode* The default setting is normal shooting. 2 Digital zoom* Shows the Digital Zoom mode, with “T” indicating telephoto T zoom and “W” indicating wide-angle shooting. The default setting is no digital zooming. W 2 White balance* Shows the use of the white balance control feature which adjusts Auto the color tone of th
15 Selecting the Image Quality (Record Mode) Arrow pad The Record modes allow you to shoot images with higher quality (SHQ) or larger number of 1/3 images per card (SQ). The default setting of the AUTO Record mode is HQ. OFF DIGITAL ZOOM OFF SELECT END OK Operating Procedure 1. Check that the lens barrier is open. Shooting mode menu 1/3 screen OK/menu button 2. Press the OK/menu button. The monitor shows the Shooting mode menu 1/3. 3. Press the or arrow pad key to display the 2/3 Shooting me
16 Using the Flash Arrow pad The flash has been designed to fire automatically when shooting under low light or against strong 1/3 back light. You can select one of the 5 flash AUTO modes according to different shooting situations. OFF DIGITAL ZOOM OFF SELECT END OK Operating Procedure 1. Check that the lens barrier is open. Shooting mode menu 1/3 screen OK/menu button 2. Press the OK/menu button. 1/3 The monitor shows the Shooting mode menu 1/3. AUTO 3. Select by pressing the or arrow pad k
17 Magnifying the Subject (Zooming) The optical zoom allows you to shoot an image magnifying up to 3X. The digital zoom is also available to magnify an image up to 2X. If you use both functions, you can shoot an image zoomed by up to 6X. To use the digital zoom, you need to set the Digital Zoom to “ON” using the setting menu display. Zoom lever Operating Procedure To use the optical zoom: 1. Check that the lens barrier is open. 2. Slide the zoom lever to (Telephoto) to zoom in the image (up to
18 Arrow pad To use the digital zoom: 1. Check that the lens barrier is open. 1/3 AUTO OFF 2. Press the OK/menu button. DIGITAL ZOOM OFF OK SELECT END The monitor shows the Shooting mode menu 1/3. Shooting mode menu 1/3 screen 3. Select “DIGITAL ZOOM” by pressing OK/menu button the or arrow pad key. 1/3 AUTO 4. Select “ON” by pressing the or arrow pad key, then press the OK/menu button. OFF DIGITAL ZOOM OFF OK SELECT END 5. Slide the zoom lever to to zoom in the image (up to 2X, or up to 6X
19 Shooting a Close Subject (Macro Shooting) It is recommended to use the Macro mode Arrow pad when shooting a subject at a distance of less than 0.5 m/1.6 ft. 1/3 AUTO Operating Procedure OFF DIGITAL ZOOM OFF SELECT END OK 1. Check that the lens barrier is open. Shooting mode menu 1/3 screen 2. Press the OK/menu button. OK/menu button The monitor shows the Shooting mode menu 1/3. 3. Select by pressing the or arrow pad key. 1/3 AUTO 4. Select “ON” by pressing the or arrow pad key. OFF DIGIT
20 Using the Self-Timer You can shoot images with self-timer operation. This is useful for taking pictures with yourself included in the image. Fix the camera securely on a tripod, etc., before self- timer shooting. Arrow pad Operating Procedure 1/3 AUTO 1. Check that the lens barrier is open. OFF DIGITAL ZOOM OFF OK SELECT END 2. Press the OK/menu button. The monitor shows the Shooting mode Shooting mode menu 1/3 screen menu 1/3. OK/menu button 3. Select / by pressing the or arrow pad key.
|1||Olympus 227590||Digital Camera||13|
|2||Olympus 227600||Digital Camera||14|
|3||Olympus 227645||Digital Camera||18|
|4||Olympus 227595||Digital Camera||20|
|5||Olympus 227570||Digital Camera||35|