Our goal is to provide you with a quick access to the content of the user manual for Panasonic DMC-LC1GN. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic DMC-LC1GN.
If looking through the Panasonic DMC-LC1GN user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic DMC-LC1GN but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Panasonic DMC-LC1GN. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LC1-GN.book 1 ページ ２００４年１月２９日 木曜日 午前９時１５分
Before use, please read these
LC1-GN.book 2 ページ ２００４年１月２９日 木曜日 午前９時１５分 Safety Safety Dear Customer, • Please note that the actual controls We would like to take this opportunity to and components, menu items, etc. of thank you for purchasing this Panasonic your Digital Camera may look Digital Camera. Please read these somewhat different from those shown Operating Instructions carefully and in the illustrations in these Operating keep them handy for future reference. Instructions. SD Logo is a trademark. Other
LC1-GN.book 3 ページ ２００４年１月２９日 木曜日 午前９時１５分 9 Pictures Multi Playback .................. 53 Contents Using the Playback Zoom ................. 54 Deleting Pictures ............................... 55 Safety Information for Your Safety ................. 2 Recording pictures (advanced) Preparation Recording Motion Images ................. 58 Standard Accessories ......................... 5 FUNCTION Menu.............................. 60 Names of the Components ................. 7 Setting the White B
LC1-GN.book 4 ページ ２００４年１月２９日 木曜日 午前９時１５分 Using a Printer (USB Direct-Print)... 103 Others Using the External Flash ................. 105 Using the Wide Conversion Lens/ Close-up Lens ............................. 108 After Use ......................................... 110 Screen Display................................ 111 The Menu Items .............................. 113 Cautions for Use ............................. 115 Approximate number of recordable pictures and the size..................
LC1-GN.book 5 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Preparation Standard Accessories Before using your camera, check the contents. ∫ SD Memory Card (16 MB) ∫ AC Cable RP-SD016B K2CJ2DA00002 or K2CJ2DA00011 (In the text, it is indicated as “Card”) ∫ DC Cable ∫ Battery Pack K2GH2DB00003 CGR-S602E (In the text, it is indicated as “Battery”) ∫ Battery Charger/AC Adaptor ∫ AV Cable DE-972B K1V204C10001 (In the text, it is indicated as “AC Adaptor”) ∫ USB Connection Cable K1HA05CD0004 5
LC1-GN.book 6 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation ∫ Lens Cap ∫ Remote Shutter VYK1F94 DMW-RS1 ∫ CD-ROM ∫ Strap Please order VYC0913 as repair VFC4037 parts. ∫ Lens Hood VYQ2884 ∫ Hood Cap VYK1C96 ∫ MC Protector (Filter diameter: 69 mm) DMW-LMC69 Please order VYC0917 as repair parts. 6
LC1-GN.book 7 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Preparation Names of the Components 1 Lens 1 2 34 5 6 2 Microphone (P59, P69) 3 White Balance Sensor 4 Self-timer Indicator (P49) 5Flash 6 AF Sensor 7 Viewfinder (P26) 8 Flash Open Button (P44) 9 [EVF/LCD] Button (P26) 10 [DISPLAY] Button (P26) 11 Exposure Compensation (P47)/Auto Bracket (P48)/Flash Output 7 8 9 10111213 14 Adjustment (P45) Button 12 [FUNCTION] Button (P60) 13 Power Indicator (P22, P35) 14 Camera Switch (P22, P34) 15 LCD M
CLOSE LC1-GN.book 8 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation 30 Focus Ring Button (P34, P40) 30 31 32 31 Aperture Ring Button (P30) 32 Diopter Adjustment Dial (P27) 33 [USB] Socket (5pin) (P97) 34 [DC IN] Socket (P13) 35 [AV OUT/REMOTE] Socket (P94) 36 Terminal Door 33 34 35 36 37 Strap Eyelet (P19) 38 Card Slot (P15) 39 Card Door (P15) 37 38 39 40 Battery Door (P11) 41 Battery Door Open/Close Lever (P11) 42 Tripod Receptacle 40 41 42 ª Battery Charger/AC Adaptor (P9, P13) 1 2 1 [AC IN] Termina
LC1-GN.book 9 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Charging the Battery Charge the battery before using. 1 Connect the AC cable. 3 Detach the battery. The AC cable does not fit entirely ¬Suggestions/Tips ¬ into the AC input terminal. A gap After use, be sure to disconnect the will remain as shown below. AC cable. The battery becomes warm after use/ charge or during charge. The camera also becomes warm during use. However, it is not a malfunction. The [POWER] indicator A lights.
LC1-GN.book 10 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation About the Battery ª Battery indication The remaining battery power appears on the screen. (This does not appear when using AC adaptor) > > > (The indication turns red and blinks): Recharge or replace the battery. ª Charging time and available recording time Measured under the following conditions: Temperature: 25°C/Humidity: 60% Recording once every 30 seconds, flash every other record. Using the battery (supplied) and 16 MB SD Memor
OPEN OPEN LC1-GN.book 11 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Inserting the Battery Preparation Check if the camera is turned off. Close the flash. 1 Slide the lever to open the battery 3 Close the battery door and then door. slide the battery door open/close lever. 2 Insert the battery fully until the lock 1 pops on the battery. Hold both sides of the battery when inserting. 11 CLOSE CLOSE
OPEN OPEN LC1-GN.book 12 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Removing the Battery Preparation Check if the camera is turned off. Close the flash. 1 Slide the lever to open the battery 3 Close the battery door and then door. slide the battery door open/close lever. 2 Push the lock 1 to remove the battery. ¬Suggestions/Tips ¬ If you will not use the camera for a long time, remove the battery. After the fully charged battery has been inserted for more than 24 hours, the clock set
LC1-GN.book 13 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Using the AC Adaptor You can use the camera without worrying about battery discharge by connecting to an AC adaptor. Preparation Check if the camera is turned off. Close the flash. 1 Connect the AC cable. 3 Connect the DC cable. 2 Slide the terminal door to open. ¬Suggestions/Tips ¬ Use the supplied DC cable. If you use other DC cables, it may cause a malfunction. The camera becomes warm during use. This is not a malfunction. D
LC1-GN.book 14 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation About the Card ª Access to the card ª SD Memory Card (supplied) and MultiMediaCard (optional) When the card is accessed, the card access indication 1 lights. The SD Memory Card and MultiMediaCard are small, lightweight, P 2560 removable external memory cards. The 19 reading/writing speed of an SD Memory Card is fast. The SD Memory Card is equipped with a Write-Protect switch A that can inhibit writing and formatting a card. (When t
LC1-GN.book 15 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Inserting the Card Preparation Check if the camera is turned off. Close the flash. 1 Slide the card door to open. 3 Close and slide the card door. 2 Insert the card with the label facing the rear of the camera until it clicks. Insert the card, pressing gently until it locks in place. If the card will not insert freely, it may be reversed. Do not force the card. Do not touch the connection terminals on the back side of the car
LC1-GN.book 16 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Removing the Card Preparation Check if the camera is turned off. Close the flash. 1 Slide the card door to open. 3 Close and slide the card door. 2 Push the card until it clicks then ¬Suggestions/Tips ¬ pull the card out upright. The card and the data may be damaged if it is removed while the camera is on. If the card door cannot be completely closed, remove the card and insert it again. If the card cannot be fully inserted,
LC1-GN.book 17 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Attaching the MC Protector/Lens Cap/Lens Hood/Hood Cap Preparation Check if the camera is turned off. Close the flash. ª Attaching the MC Protector ª Attaching the lens cap 1 Attach the MC protector. 1 Attach the lens cap. The MC protector is a transparent When you turn the camera off, filter which affects neither the carry the camera or play back the colours nor the amount of light, so pictures, attach the lens cap to it can al
LC1-GN.book 18 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation When attaching the lens hood, use the ª Attaching the lens hood/hood cap dedicated hood cap. You cannot use the lens cap. 1 1 Attach the lens hood. When taking pictures with flash, photo 2 Attach the hood cap. flash is interrupted by the lens hood and the bottom of the screen becomes dark. (vignetting effect) When taking pictures with flash, we recommend detaching the lens hood. Consult the dealer or your nearest servicentre
LC1-GN.book 19 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Attaching the Strap 1 1 Pressing both sides of the 3 Pass the metal fitting through the cover. eyelet of the camera. 2 Pull out the black strap holder completely. 4 Rotate the black strap holder in the opposite direction until it clicks. 5 Slide the cover until it is attached 2 Detach the black strap holder from firmly. the metal fitting. When the black strap holder is Attach the strap to the other side of the completely detach
LC1-GN.book 20 ページ ２００４年１月２９日 木曜日 午前９時１５分 Preparation Setting the Date/Time (Clock Set) ª Initial Use 1 Select [CLOCK SET] from the The clock is not set when the camera is [SETUP] menu. (P22) shipped. When you turn the camera on, 2 the clock setting screen appears. // REC SETUP 3 3 MF ASSIST MF1 CUSTOM SET. NO.RESET PLEASE SET THE CLOCK CLOCK SET CLOCK SET MENU SELECT SET EXIT MENU MENU REVIEW When pressing the [MENU] button, the screen shown in step 2 appears. Set the clock on it. Th
|1||Panasonic AJ- P||Digital Camera||16|
|2||Panasonic AJ-D215P||Digital Camera||37|
|3||Panasonic AJ-D900WP||Digital Camera||32|
|4||Panasonic AJ-D900WAP||Digital Camera||31|
|5||Panasonic AJ-D610WA||Digital Camera||10|