Panasonic DMC-TZ3P user manual

User manual for the device Panasonic DMC-TZ3P

Device: Panasonic DMC-TZ3P
Size: 3,12 MB
Date of adding : 2013-02-22 15:27:24
Number of pages: 60
Print the manual


How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Panasonic DMC-TZ3P. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic DMC-TZ3P.

For your convenience

If looking through the Panasonic DMC-TZ3P user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualPanasonic DMC-TZ3P on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Panasonic DMC-TZ3P to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Panasonic DMC-TZ3P user manual
« Page 1 of 60 »
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic DMC-TZ3P but the selected pages only. paper.


Below you will find previews of the content of the user manuals presented on the following pages to Panasonic DMC-TZ3P. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Digital Camera
© 2007 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.

Summary of the content on the page No. 2

(S)...........Silver Type DMC-TZ2GN (K)...........Black Type (except DMC-TZ2PL/GD/GT) DMC-TZ2GT (A)...........Blue Type (only DMC-TZ3P/PC/EB/EE/EF/EG/ Vol. 1 EGM/GC/SG) Colour TABLE OF CONTENTS PAGE PAGE 1 Safety Precaution -------------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Fl

Summary of the content on the page No. 3

1 Safety Precaution 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check. 2. Connect a 1.5 k Ω, 10 W resistor, in parallel with a 0.15 μF in the Schematic Diagrams, Circuit Board Layout, capacitor, between each exposed metallic part on the set E

Summary of the content on the page No. 4

1.4. How to Discharge the Capacitor on Flash PCB CAUTION: 1. Be sure to discharge the capacitor on FLASH PCB. 2. Be careful of the high voltage circuit on FLASH PCB when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and Remove the necessary parts/unit. 2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k Ω /5W). (an equivalent type of resistor may be used.) 3. Put the resistor between both terminals of capacitor on FLASH PCB for approx. 5 seconds. 4.

Summary of the content on the page No. 5

2Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain o

Summary of the content on the page No. 6 Important 2.3. Caution for AC Cord The wires in this mains lead are coloured in accordance with (For EB/GC/SG) the following code: 2.3.1. Information for Your Safety Blue Neutral IMPORTANT Brown Live Your attention is drawn to the fact that recording of pre- recorded tapes or discs or other published or broadcast As the colours of the wires in the mains lead of this appliance material may infringe copyright laws. may not correspond with the coloured markings identifying the WARNING term

Summary of the content on the page No. 7

2.4. How to Replace the Lithium Battery 2.4.1. Replacement Procedure 1. Remove the Top Operation PCB. (Refer to Disassembly Procedures.) 2. Remove the Lithium battery (Ref. No. “B9901” at component side of Top Operation PCB) and then replace it into new one. NOTE: This Lithium battery is a critical component. (Type No.: ML614S/ZT Manufactured by Matsushita Battery Industrial Co.,Ltd.) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in requirement desi

Summary of the content on the page No. 8

3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2. General Description About Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all el

Summary of the content on the page No. 9

3.4. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of DMC-TZ3/TZ2, regardless of the colours. • a) DMC-TZ3S • b) DMC-TZ3, TZ2P/PC • c) DMC-TZ3, TZ2EB/EF/EG/EGM/GN • d) DMC-TZ3, TZ2EE • e) DMC-TZ3, TZ2GD • f) DMC-TZ3, TZ2GT • g) DMC-TZ3PL/GC/GK/SG, TZ2PL/GC/GK (DMC-TZ3S is exclusively Japan domestic model.) What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash ROM mounted on Main PCB. 3.4.1. Defining methods: To define the model suffix to

Summary of the content on the page No. 10

3.4.2. INITIAL SETTINGS: When you replace the Main PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro- cedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, be sure to read the following CAUTIONS. 2. PROCEDURES: • Preparation. Proceed the picture back up from the unit (Refer to above "CAUTION 2") • Step 1. The temporary cancellation of factory setting: Set the mode dial to “[ Normal pict

Summary of the content on the page No. 11

• Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”) [Caution for before settings] Once "NONE(JAPAN)" (Area for Japan) or "P" (Area for North America) is selected with "INITIAL SETTINGS", other areas will not displayed even if "INITIAL SETTINGS" menu is displayed again, thus, the area can not be changed. Select the area carefully. Select the area with pressing “[ UP ] / [ DOWN ] of Cross key”, and then press the “[ RIGHT ] of Cross key”. The only set area is displayed, and then press the “[

Summary of the content on the page No. 12

4 Specifications 12

Summary of the content on the page No. 13

5 Location of Controls and Components 13

Summary of the content on the page No. 14


Summary of the content on the page No. 15

6 Service Mode 6.1. Error Code Memory Function 1. General description This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred more than 16, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the battery is pulled out) because the error code is memorized to FLASH ROM when the unit is

Summary of the content on the page No. 16

• 5. How to read the error code: One error code is displayed for 8 bit, the contents of error codes is indicated the table as shown below. Attribute Main item Sub item Error code Contents (Upper) High 4 bits Low 4 bits Check point (Lower) LENS Lens drive OIS 18*0 1000 PSD (X) error. Hall element (X axis) position detect error in OIS unit. OIS Unit 2000 PSD (Y) error. Hall element (Y axis) position detect error in OIS unit. OIS Unit 3000 GYRO (X) error. Gyro (IC7201: X axis) detect error on Main

Summary of the content on the page No. 17

Attribute Main item Sub item Error code Contents (Upper) High 4 bits Low 4 bits Check point (Lower) HARD VENUS A/D Flash 28*0 0000 Flash charging error. IC6001-(247) signal line or Flash charging circuit FLASH ROM FLASH ROM 2B*0 0001 EEPROM read error (EEPROM (EEPROM IC6002 (FLASH ROM) Area) Area) 0002 EEPROM write error IC6002 (FLASH ROM) SYSTEM RTC 2C*0 0001 SYSTEM IC initialize failure error Communication between IC6001 (VENUS 3) and IC9101 (SYSTEM) SOFT CPU Reset 30*0 0001 NMI reset | Non Ma

Summary of the content on the page No. 18

6.2. Confirmation of Firmware Version The Firmware version can be confirmed by ordering the following steps:. • Step 1. The temporary cancellation of factory setting: Set the mode dial to “[ Normal picture mode ] (Red camera mark)”. Insert the SD memory card which has a few photo data. While keep pressing [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, then turn the power on. • Step 2. Confirm the version: Set the mode dial to “[ Playback ]” and then press [ DISPLAY ] to

Summary of the content on the page No. 19

7 Service Fixture & Tools 7.1. Service Fixture and Tools The following Service Fixture and tools are used for checking and servicing this unit. 19

Summary of the content on the page No. 20

7.2. When Replacing the Main PCB After replacing the MAIN PCB, be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in “TSN system”, together with Maintenance software. 7.3. Service Position This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing. Table S1 Extension Cable List No. Parts No. Connection Form 1 VFK1950 FP9801 (MAIN) - CCD UNIT 3

Similar user manuals
# User manual Category Download
1 Panasonic AJ- P Digital Camera 19
2 Panasonic AJ-D215P Digital Camera 11
3 Panasonic AJ-D900WP Digital Camera 28
4 Panasonic AJ-D900WAP Digital Camera 16
5 Panasonic AJ-D610WA Digital Camera 11