Panasonic Lumix Digital Camera DMC-XS1GC user manual

User manual for the device Panasonic Lumix Digital Camera DMC-XS1GC

Device: Panasonic Lumix Digital Camera DMC-XS1GC
Size: 6,83 MB
Date of adding : 2014-11-25 15:28:57
Number of pages: 39
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Panasonic Lumix Digital Camera DMC-XS1GC. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic Lumix Digital Camera DMC-XS1GC.

For your convenience

If looking through the Panasonic Lumix Digital Camera DMC-XS1GC user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualPanasonic Lumix Digital Camera DMC-XS1GC on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Panasonic Lumix Digital Camera DMC-XS1GC to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Panasonic Lumix Digital Camera DMC-XS1GC user manual
Advertisement
« Page 1 of 39 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic Lumix Digital Camera DMC-XS1GC but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Panasonic Lumix Digital Camera DMC-XS1GC. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

ORDER NO. DSC1302004CE
B26
Digital Camera
Model No. DMC-XS1P
DMC-XS1PC
DMC-XS1PU
DMC-XS1EB
DMC-XS1EE
DMC-XS1EF
DMC-XS1EG
DMC-XS1EP
DMC-XS1GA
DMC-XS1GC
DMC-XS1GF
DMC-XS1GK
DMC-XS1GN
DMC-XS1GT
Colour
(W)..........White Type
(K)...........Black Type
(R)...........Red Type (except PC)
(WA)........White Type (only EB/EG/EP)
(V)............Violet Type (only EB/EF/EG/EP/GC/GF/GN)
© Panasonic Corporation 2013 Unauthorized copy-
ing and distribution is a violation of law.

Summary of the content on the page No. 2

TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure. 1)--------3 1.4. How to Discharge the E.Capacitor on Flash Top P.C.B.----------------------------------------------------4 2Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Di

Summary of the content on the page No. 3

1 Safety Precautions 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure. 1) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check. 2. Connect a 1.5 k Ω, 10 W resistor, in parallel with a 0.15 μF in the Schematic Diagrams, Circuit Board Layout, capacitor, between each exposed metallic part on the set

Summary of the content on the page No. 4

1.4. How to Discharge the E.Capacitor on Flash Top P.C.B. CAUTION: • Be sure to discharge the E.Capacitor on Flash Top P.C.B. before disassembling. • Be careful of the high voltage circuit on Flash Top P.C.B. when servicing. [Discharging Procedure] 1. Put the insulation tube on the lead part of resistor (ERG5SJ102:1k Ω /5W). (An equivalent type of resistor may be used.) 2. Put the resistor between both terminals of E.Capacitor on the Flash Top P.C.B. for approx. 5 seconds. 3. After discharging,

Summary of the content on the page No. 5

2Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain

Summary of the content on the page No. 6

3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2. Important Notice 3.2.1. CCD FPC UNIT: • The image sensor (CCD FPC) unit which are connected to the lens unit with 3

Summary of the content on the page No. 7

3.3. General Description About Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 °C (86 °F) mo

Summary of the content on the page No. 8

3.4. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of DMC-XS1, regardless of the colours. • a) DMC-XS1 (Japan domestic model) • b) DMC-XS1P/PC • c) DMC-XS1EB/EF/EG/EP • d) DMC-XS1EE • e) DMC-XS1GT • f) DMC-XS1GN • g) DMC-XS1PU/GA/GC/GF/GK What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash-ROM mounted on Main P.C.B.. 3.4.1. Defining methods: To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom

Summary of the content on the page No. 9

3.4.2. INITIAL SETTINGS: After replacing the Main P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following procedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, make sure to read the following CAUTIONS. 2. PROCEDURES: • Precautions: Read the above “CAUTION 1” and “CAUTION 2”, carefully. • Preparation: - Attach the Battery. (Since this unit has built-in memory, it can be performed without i

Summary of the content on the page No. 10

• Step 4. Display the INITIAL SETTING: While pressing [ MENU/SET ] button and “[ RIGHT ] of Cursor button” simultaneously, turn the Power off. The “INITIAL SETTINGS” menu is displayed. There are two kinds of “INITIAL SETTINGS” menu form as follows: [CASE 1. After replacing Main P.C.B.] When Main P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Five pages in total) [CASE 2. Other than “After replacing Main P.C.B.”] • Step 5. Choose the model suffix in “INITIAL SETT

Summary of the content on the page No. 11

• Step 6. Set the model suffix in “INITIAL SETTINGS”: Press the “[ RIGHT ] of Cursor buttons”. The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation. (The unit is powered off automatically.) • Step 7. CONFIRMATION: Confirm the display of “PLEASE SET THE CLOCK” in concerned language when the unit is turned on again. When the unit is connected to PC with USB cable, it is detected as removable media. (When the “GK” or “GT” model suffix is selected, th

Summary of the content on the page No. 12

4 Specifications The following specification is for DMC-XS1P/DMC-FH10P. Some specifications may differ depending on model suffix. 12

Summary of the content on the page No. 13

5 Location of Controls and Components The following description is for DMC-XS1P. Some descriptions may differ depending on model suffix. 13

Summary of the content on the page No. 14

14

Summary of the content on the page No. 15

6 Service Mode 6.1. Error Code Memory Function 1. General description This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred more than 16, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery, the battery is pulled out) The error code is memorized to Flash-ROM when the unit has j

Summary of the content on the page No. 16

Error Code List The error code consists of 8 bits data and it shows the following information. 16

Summary of the content on the page No. 17

Important notice about “Error Code List” 1) About “*” indication: The third digit from the left is different as follows. - In case of 0 (example: 18001000) When the third digit from the left shows “0”, this error occurred under the condition of INITIAL SETTINGS has been completed. It means that this error is occurred basically at user side. - In case of 8 (example: 18801000) When the third digit from the left shows “8”, this error occurred under the condition of INITIAL SETTINGS has been releas

Summary of the content on the page No. 18

7 Service Fixture & Tools 7.1. Service Fixture and Tools The following Service Fixture and tools are used for checking and servicing this unit. 7.2. When Replacing the Main P.C.B. After replacing the Main P.C.B., be sure to achieve adjustment. The service software is available at “TSN Website”. 18

Summary of the content on the page No. 19

7.3. Service Position Check the Flash Top P.C.B., when servicing this DSC.(Refer to the following.) CAUTION. (When servicing Flash Top P.C.B.) 1. Be sure to discharge the E.Capacitor on Flash Top P.C.B.. Refer to “How to Discharge the E.Capacitor on Flash Top P.C.B.”. The E.Capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed. 2. Be careful of the high voltage circuit on Flash Top P.C.B.. 3. DO NOT allow other parts to touch the high voltage circuit on

Summary of the content on the page No. 20

8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart This is a disassembling chart. When assembling, perform this chart conversely. 8.2. P.C.B. Location 20


Similar user manuals
# User manual Category Download
1 Panasonic AJ- P Digital Camera 32
2 Panasonic AJ-D215P Digital Camera 34
3 Panasonic AJ-D900WP Digital Camera 25
4 Panasonic AJ-D900WAP Digital Camera 31
5 Panasonic AJ-D610WA Digital Camera 10