Panasonic WV-BP554 user manual

User manual for the device Panasonic WV-BP554

Device: Panasonic WV-BP554
Size: 0,30 MB
Date of adding : 2014-11-25 15:28:57
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Panasonic WV-BP554. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic WV-BP554.

For your convenience

If looking through the Panasonic WV-BP554 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualPanasonic WV-BP554 on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Panasonic WV-BP554 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Panasonic WV-BP554 user manual
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic WV-BP554 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Panasonic WV-BP554. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

CCTV Cameras
WV-BP550/WV-BP554
(Lens : option)

Before attempting to connect or operate this product,
please read these instructions completely.
FRANÇAIS ENGLISH

Summary of the content on the page No. 2

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO For U.S.A NOT REMOVE COVER (OR BACK). NO USER SER- Warning: VICEABLE PARTS INSIDE. This equipment generates and uses radio frequency energy REFER SERVICING TO QUALIFIED SERVICE PER- and if not installed and used properly, i.e., in strict accor- SONNEL. dance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a C

Summary of the content on the page No. 3

CONTENTS PREFACE ........................................................................................................................................................................ 2 FEATURES ...................................................................................................................................................................... 2 PRECAUTIONS ..........................................................................................................................

Summary of the content on the page No. 4

PREFACE Panasonic's WV-BP550 series digital camera intro- ture elements), and digital signal processing LSI's. This duces a new level of high picture quality and high res- model offers cutting-edge technology for advanced olution through the use of a 1/3-inch interline transfer video surveillance. CCD image sensor having 771 horizontal pixels (pic- FEATURES 1. The following functions are built in. 6. High quality picture: (1) Auto Light Control (ALC)/Electronic Light (a) 2H type vertical enhanc

Summary of the content on the page No. 5

PRECAUTIONS 1. Do not attempt to disassemble the camera. 5. Clean the CCD faceplate with care. Do not clean the CCD with strong or abrasive To prevent electric shock, do not remove screws detergents. Use lens tissue or a cotton tipped or covers. applicator and ethanol. There are no user serviceable parts inside. Ask a qualified service person for servicing. 6. Never face the camera towards the sun. Do not aim the camera at bright objects. Whether 2. Handle the camera with care. the camera is in

Summary of the content on the page No. 6

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS POWER 120V AC 60Hz VIDEO OUT ALARM OUT GEN-LOCK SUPERDYNAMIC WV-BP550 GND POWER DC 12V AC 24V VIDEO OUT IN IN Hi-Z G/L 75W 1 ALARM OUT SUPERDYNAMIC 2 GEN-LOCK WV-BP550 GND GND Slide the panel to the left until it locks. -4-

Summary of the content on the page No. 7

q Auto Iris Lens Connector u Left Button ( ) This connector is used to connect with the auto iris This button is used to move the cursor to the left. It lens by a 4-pin male connector that is supplied as also selects the mode and can be used to adjust a standard accessory (Part No. YFE4191J100). some levels. w Flange-back Adjusting Ring i Up Button ( ) This ring is used to adjust the back focal length or This button is used to move the cursor upward. It picture focus. Rotate this ring clockwise

Summary of the content on the page No. 8

!3 Video Output Connector (VIDEO OUT) Cautions: This connector is used to connect with the VIDEO 1. Connect to 12V DC (10.5V-16V) or 24V AC IN connector of the monitor. (19.5V-28V) class 2 power supply only. Make sure to connect the grounding lead !4 Power Cord Socket to the GND terminal when the power is This socket is used to connect the power cord supplied from a 24V AC power source. (supplied as a standard accessory). 2. To prevent fire or electric shock hazard, use a UL listed wire VW-1, st

Summary of the content on the page No. 9

CONNECTIONS Resistance of copper wire [at 20°C (68°F)] A. WV-BP550 (120V AC 60Hz) 1. Connect the AC power cord (supplied as standard Copper wire #24 #22 #20 #18 2 2 2 2 size (AWG) (0.22mm ) (0.33mm ) (0.52mm ) (0.83mm ) accessory) to the power cord socket of the cam- era. Resistance 0.078 0.050 0.030 0.018 W /m 2. Connect the AC power cord to an electrical outlet Resistance 0.026 0.017 0.010 0.006 of 120V AC 60 Hz. W /ft Notes: • Connect the power cord firmly. • Calculation method of maximum cab

Summary of the content on the page No. 10

2. 24 V AC Power Supply Video Cable Connect the power cable to the AC/DC compatible 1. It is recommended to use a monitor whose resolu- input terminal on the rear panel of the camera. tion is at least equal to that of the camera. 2. Set the termination switch to the 75W position on DC 12V AC 24V the last monitor. IN IN A. Use a 75W coaxial cable. 1 B. Set the termination switch to the 75W position 2 on the last monitor and to the Hi-Z position on GND the other monitors. Do not change the posi-

Summary of the content on the page No. 11

Type of RG-59/U RG-6U RG-11/U RG-15/U coaxial cable (3C-2V) (5C-2V) (7C-2V) (10C-2V) Recommended (m) 250 500 600 800 maximum cable length (ft) 825 1,650 1,980 2,640 3. Wiring precautions: • Do not bend the coaxial cable into a curve whose radius is smaller than 10 times the cable’s diame- ter. • Never staple the cable even if with circular sta- ples. Impedance mismatching will occur. • Never crush or pinch the cable. All of the above will change the impedance of the cable and cause poor picture

Summary of the content on the page No. 12

(2) After connection, assemble the lens connector as Installation of Auto Iris Lens Connector follows. Install the lens connector (YFE4191J100) when using a video drive ALC lens. The installation should be made by qualified ser- Connector vice personnel or system installers. Cover Automatic Iris Lens (1) Cut the iris control cable at the edge of the lens Heat connector to remove the existing lens connector Shrinkable and then remove the outer cable cover as shown Tubes Iris Control in the diagra

Summary of the content on the page No. 13

Mounting the Lens Caution for Mounting the Lens Caution: The lens mount should be a C-mount or CS-mount (1”- Before you mount the lens, loosen the two screws 32UN) and the lens weight should be less than 450g on the ring, and rotate this ring clockwise until it (0.99 lbs). If the lens is heavier, both the lens and cam- stops. If the ring is not at the end, the inner glass era should be secured by using the supporter. or CCD image sensor may be damaged. The protrusion at the rear of the lens shou

Summary of the content on the page No. 14

FOCUS OR FLANGE-BACK ADJUSTMENT The following adjustment should be made by qualified 3. Tighten the screws on the flange-back adjusting service personnel or system installers. ring. 1. Loosen the screws on the flange-back adjusting ring. Focus adjust for CS-mount lens Focus adjust for C-mount lens Flange-back Adjusting Ring Screws 2. Turn the flange-back adjusting ring to the desired position. Caution: When the C-mount lens is mounted, do not rotate the ring counterclockwise by force after it st

Summary of the content on the page No. 15

INSTALLATION OF CAMERA • Mounting from the bottom • Mounting from the top This camera is designed to be mounted from the Remove the mount adapter from the bottom of the bottom, as shown below. The mounting hole is a camera by removing the two fixing screws. Attach standard photographic pan-head screw size (1/4” the mount adapter to the top as shown in the dia- - 20). gram, then mount the camera on the mounting bracket. Make sure that the two original fixing screws are used when mounting the mou

Summary of the content on the page No. 16

SET UP 1. CAMERA SETUP MENU This camera utilizes a user setup menu that is displayed on-screen. The setup menu contains various items that form a tree-type structure as shown below. It is described in the following section : "2. SETUP OPERATION". CAM SET UP SET UP DISABLE fi SET UP ENABLE fi Camera Light Electronic Shutter AGC SYNC ID Control Sensitivity Speed ON/OFF INT/LL ON/OFF Enhancement ALC ELC ON/OFF Camera SUPER-D SUPER-D INT VS LL VD2 ID ON OFF Manual Automatic Manual Automatic Editi

Summary of the content on the page No. 17

Lens Drive Motion Special Signal Detector menu Selection ON/OFF DC Video Detection Upside AP Level down Gain Pedestal Adjustment Detection Masking Area Selection -15-

Summary of the content on the page No. 18

ter changes each time this button 2. SETUP OPERATION is pressed. This camera utilizes a user setup menu (CAM SET UP) Left Button (): This button is used to move the that is displayed on the monitor. cursor to the left. Use this button To set items on the CAM SET UP menu, use the follow- to select or adjust the parameters ing buttons on the side panel. of the selected item. The parame- ter changes each time this button is pressed. Up Button Set Button (): This button is used to set the determined

Summary of the content on the page No. 19

• Opening the Setup Menu ** CAM SET UP ** Press and hold down for a second or longer. CAMERA ID OFF ¿ ALC/ELC ALC ¿ SHUTTER --- Blinking AGC ON ** CAM SET UP ** SENS UP OFF CAMERA ID OFF ¿ SYNC INT ALC/ELC ALC ¿ MOTION DET OFF ¿ SHUTTER --- LENS DRIVE DC AGC ON SENS UP OFF END SET UP DISABLE SYNC INT MOTION DET OFF ¿ LENS DRIVE DC END SET UP DISABLE The CAM SET UP menu appears on the

Summary of the content on the page No. 20

Important Notice: ** CAM SET UP ** ** CAM SET UP ** When the cursor is moved to END and the CAM CAMERA ID OFF ¿ CAMERA ID OFF ¿ ALC/ELC ALC ¿ ALC/ELC ALC ¿ SET UP menu closed after changing the parame- SHUTTER --- SHUTTER --- ters, the new values are stored in the EEPROM AGC ON AGC ON SENS UP OFF SENS UP OFF (Electric Erasable and Programmable Read Only SYNC INT SYNC INT MOTION DET OFF ¿ MOTION DET OFF


Similar user manuals
# User manual Category Download
1 Panasonic AJ- P Digital Camera 31
2 Panasonic AJ-D215P Digital Camera 31
3 Panasonic AJ-D900WP Digital Camera 16
4 Panasonic AJ-D900WAP Digital Camera 14
5 Panasonic AJ-D610WA Digital Camera 10