Our goal is to provide you with a quick access to the content of the user manual for Panasonic WV-CLR924AE. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic WV-CLR924AE.
If looking through the Panasonic WV-CLR924AE user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic WV-CLR924AE but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Panasonic WV-CLR924AE. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Colour CCTV Cameras
Model No. WV-CLR920A
(Lens : option)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
ENGLISH VERSION We declare under our sole responsibility that the product to which this Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna declaration relates is in conformity with the standards or other normative deklaration hänvisar är i överensstämmelse med standarddokument, eller documents following the provisions of Directives EEC/73/23 and andra normativa dokument som framstölls i EEC-direktiv nr. 73/23 och EEC/89/336. 89/336. Wir erklären in alleiniger Verantwort
CAUTION For U.K. RISK OF ELECTRIC SHOCK FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE- DO NOT OPEN FULLY. WARNING: This apparatus must be earthed CAUTION: TO REDUCE THE RISK OF ELECTRIC IMPORTANT SHOCK, DO NOT REMOVE COVER (OR BACK). The wires in this mains lead are coloured in accordance with the follow- NO USER-SERVICEABLE PARTS INSIDE. REFER ing code. Green-and-yellow: Earth SERVICING TO QUALIFIED SERVICE PERSONNEL. Blue: Neutral Brown: Live As the colours of the wire in the mains lead
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli- fiers) that produce heat. 9) Do not defeat the safety purpose of the polari
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs. S3125A 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, li
CONTENTS PREFACE Panasonic's WV-CLR920A (WV-CLR924AE) series digi- IMPORTANT SAFETY INSTRUCTIONS ...................... 4 tal colour camera introduces a new level of high picture PREFACE .................................................................... 6 quality and high resolution through the use of a 1/2-inch FEATURES .................................................................. 7 frame interline transfer CCD image sensor having 762 PRECAUTIONS .........................................
FEATURES 1. The following functions are built in. 6. High quality picture: (1)Auto Light Control (ALC)/Electronic Light (a) 2H type vertical enhancer for greater picture Control (ELC) sharpness (2) Back Light Compensation (Auto: Factory pre- (b) Chroma averaging circuit for better colour sig- set, Manual: Manual photometric measuring nal to noise ratio area set) (c) Minimum of aliasing on fine objects (3)Various External Sync Functions, including (d) Expanded dynamic range by use of knee cir- Ge
PRECAUTIONS 1. The installation should be made by qualified 5. Do not use strong or abrasive detergents when service personnel or system installers. cleaning the camera body. Use a dry cloth to clean the camera when dirty. 2. Do not attempt to disassemble the camera. In case the dirt is hard to remove, use a mild deter- To prevent electric shock, do not remove screws or gent and wipe gently. Afterwards, wipe off the covers. remained part of the detergent in it with a dry cloth. There are no user
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q Auto Iris Lens Connector i Left Button (L) This connector is used to connect the auto iris lens This button is used to move the cursor to the left. It with a 4-pin male connector supplied as a standard is also used to select the mode and can be used to accessory (Part No. YFE4191J100). adjust some levels. w Flange-back Adjusting Ring (FB) o Up Button (J) This ring is used to adjust the back focal length or This button is used to move the cursor upward. It is picture focus. Rotate this ring upw
The selected full or half duplex setting will be !8 Day/Night Input Terminal (DAY/NIGHT IN/GND) enabled after the camera is powered up again. This terminal is used for connecting the camera to an external day/night detecting sensor. !4 Gen-lock Input Connector (GEN-LOCK) IN/OUTPUT This connector is used to connect an external sys- TERMINAL tem for synchronization. 1 B T 2 A RS485 !6 3 B !5 Video Output Connector (VIDEO OUT) R 4 A This connector is used to connect with the VIDEO 5 GND 6 GND IN co
CONNECTIONS The WV-CLR924AE has an AC/DC compatible input ter- A. WV-CLR920A (220 - 240 V AC 50Hz) minal. The 12 V DC or 24 V AC power supply cord can 1. Plug the AC power cord (supplied as standard be connected to this terminal. The camera detects the accessory) into the AC inlet socket. power source automatically. 2. Connect the AC power cord to a 220 - 240 V AC DC 12V AC 24V IN IN 50 Hz outlet. 1. 12 V DC Power Supply 1 Notes: Connect the power cord • Connect the power cord firmly. 2 to the
2. 24 V AC Power Supply Type of RG-59/U RG-6/U RG-11/U RG-15/U coaxial cable (3C-2V) (5C-2V) (7C-2V) (10C-2V) Connect the power cable to the AC/DC compatible input terminal on the rear panel of the camera. Recommended (m) 250 500 600 800 maximum cable length (ft) 825 1 650 1 980 2 640 DC 12V AC 24V IN IN 1 2 Alarm and DAY/NIGHT Connections GND 24 V AC, 50 Hz 1. Connect an external device such as a buzzer or (19.5 V - 28 V) lamp to the ALARM terminal. • The alarm output terminal is an open coll
3. Solder each wire to a pin as follows. Replacement of Auto Iris Lens Connector Pin #1: Red/Power If necessary, replace the existing lens connector with Pin #2: Not used the type YFE419J100 supplied. Pin #3: White/Video 1. Cut the existing lens connector at the end of the iris Pin #4: Black/GND, Shield control cable. Pin 3 Rib Pin 1 Pin 4 Pin 2 2. Process the cable end as shown in the figure. 4. Attach the cover to the connector. 8 mm (5/8") Cover 2 mm (1/16") Lens -14-
Mounting the Lens Caution for Mounting the Lens Caution: The lens mount should be a CS-mount (1”-32UN). In Before you mount the lens, loosen the fixing screw case of a C-mount, it should be a C-mount adapter and on the side of the camera, and rotate the flange- the lens weight should be less than 450 g (0.99 lbs). If back adjusting ring counterclockwise until it stops. the lens is heavier, both the lens and camera should be If the ring is not at the end, the inner glass or CCD secured by using t
RS-485 Setting RS485 Terminal Control data is transmitted and received to and from Follow the procedures as below. other peripherals. 1. Slide the panel to the left until it locks. 2. Set RS-485 Termination Switch to RS485 LINE Notes: TERM for the furthermost camera from the RS232C/ • Shielded, two twisted pairs cable RS485 converter and Hi-Z for the other camera. • Low impedance Initial factory setting is RS485 LINE TERM. •Wire gauge size is thicker than AWG#22 2 (0.33 mm ) RS-485 Termination S
SYSTEM CONNECTION A) Single Camera Connection (RS-485 Interface B) Daisy-chain Connection (RS-485 Interface Model/Full Duplex, Half Duplex) Model/Half Duplex) SIGNAL MONITOR MONITOR QUAD UNIT SIGNAL DATA DATA WV-CLR920 FB LOCK WV-CLR920A FB LOCK WV-CLR920 Set the RS485 Termination RS485/ WV-CLR920A Switch to Hi-Z. RS232C RS485/ Set the RS485 Termination RS232C Switch to LINE TERM. FB LOCK WV-CLR920 WV-CLR920A Set the RS485 Termination Switch to Hi-Z. FB LOCK WV-CLR920 WV-CLR920A PC PC Set the RS
FOCUS OR FLANGE-BACK ADJUSTMENT The following adjustment should be made by qualified 3. Tighten the screws on the side of the camera. service personnel or system installers. Caution: Tightening the screw by force will cause 1. Loosen the screw on the side of the camera. damage to the screw or deviation of focus. Flange-back Adjusting Ring Screw 2. Turn the flange-back adjusting ring to the desired position. Note: Adjusting a focus in the visible rays may be soft-focused with the near-infrared li
INSTALLATION OF CAMERA • Mounting from the top Fixing Screws Remove the mount adapter from the bottom of the camera by removing the two fixing screws. Attach the mount adapter to the top as shown in the dia- gram, then mount the camera on the mounting bracket. Mount Adapter Use the two original screws to attach the mount adapter to the camera. Using shorter ones may cause the camera to fall down, and using longer ones may damage the inside of the camera. Using excessively short screws may cause
SETUP 1. CAMERA SETUP MENU This camera utilizes a user setup menu that is displayed on-screen. The setup menu contains various items that form a tree type structure. SETUP menu SETUP DISABLE SETUP ENABLE RS485 CAM SETUP SETUP to A Camera Light AGC SENS UP- Shutter SYNC ID Control ON(DNR-H)/ON(DNR-M)/ OFF/AUTO/FIX Speed INT/LL ON/OFF ALC ELC ON(DNR-L)/OFF AGC MAX Camera PRESET PRESET ON PRESET PRESET ON VBS VS LL Level ID OFF (Back Light OFF (Back Light Automatic Automatic Manual Adjustm
|1||Panasonic AJ- P||Digital Camera||28|
|2||Panasonic AJ-D215P||Digital Camera||18|
|3||Panasonic AJ-D900WP||Digital Camera||20|
|4||Panasonic AJ-D900WAP||Digital Camera||38|
|5||Panasonic AJ-D610WA||Digital Camera||10|