Brother Multi-Protocol Print Server user manual

User manual for the device Brother Multi-Protocol Print Server

Device: Brother Multi-Protocol Print Server
Size: 1,01 MB
Date of adding : 2013-08-10 12:45:04
Number of pages: 135
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Brother Multi-Protocol Print Server. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Brother Multi-Protocol Print Server.

For your convenience

If looking through the Brother Multi-Protocol Print Server user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualBrother Multi-Protocol Print Server on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Brother Multi-Protocol Print Server to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Brother Multi-Protocol Print Server user manual
Advertisement
« Page 1 of 135 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Brother Multi-Protocol Print Server but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Brother Multi-Protocol Print Server. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Multi-Protocol Print Server
Network User's Guide
Please read this manual thoroughly before using the printer. You can print or view
this manual from the CD-ROM at any time, please keep the CD-ROM in a
convenient place for quick and easy reference at all times.
The Brother Solutions Center (http://solutions.brother.com) is your one stop
resource for all your printer needs. Download the latest drivers and utilities for your
printers, read the FAQs and troubleshooting tips.
Some Brother printer

Summary of the content on the page No. 2

Table of Contents Table of Contents ................................................................. i IMPORTANT INFORMATION: REGULATIONS ...........ix Intel Copyright and License Information....................ix 1 Unix Printing .........................................................................1-1 Printing from Unix/Linux Using TCP/IP............................. 1-1 Overview.....................................................................1-1 TCP/IP .................................

Summary of the content on the page No. 3

3 Peer to Peer Printing ............................................................3-1 ® How to Print in a Windows 95/98/Me Peer to Peer Network ..........................................................................................3-1 Overview.....................................................................3-1 Quick Tips:..............................................................3-1 Driver Deployment Wizard......................................3-2 TCP/IP Printing.....................

Summary of the content on the page No. 4

Brother Internet Print: Using TELNET to Configure the Print Server.................................................................5-6 Brother Internet Print: Installing the BIP Software on ® ® Windows 95/98/Me/2000/XP and Windows NT 4.0.. 5-7 Setup from CD-ROM ..............................................5-7 Adding a Second Brother Internet Port.....................5-10 ® Windows 2000/XP IPP Printing...............................5-10 Specifying a Different URL ..............................

Summary of the content on the page No. 5

® 7 Printing From a Macintosh ...........................................................7-1 ® ® Printing From a Macintosh Using AppleTalk and TCP/IP or ® the Simple Network Configuration capabilities of Mac OS X ..........................................................................................7-1 Overview.....................................................................7-1 ® ® Macintosh Configuration (Mac OS 8.5 to 9.2) .........7-3 How to Select the Print Server (AppleTalk/EtherTal

Summary of the content on the page No. 6

Using DHCP to Configure the IP Address ................ 10-5 Using APIPA to Configure the IP Address................ 10-5 Using ARP to Configure the Print Server IP Address ..................................................................................10-6 Using RARP to Configure the IP Address ................ 10-8 Using BOOTP to Configure the IP Address..............10-9 Configuring the IP Address with BRCONFIG .........10-10 Changing the IP Address Settings with the TELNET Console .......

Summary of the content on the page No. 7

Reloading Firmware Using BRAdmin .........................A-5 Reloading Process .....................................................A-6 Reloading Using the FTP Protocol from a Command Prompt ........................................................................A-7 Reloading Using the FTP Protocol from a Web Browser ....................................................................................A-8 13 INDEX...................................................................................

Summary of the content on the page No. 8

Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP-UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company. DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation. UNIX is a trademarks of UNIX Systems Laboratories. Ethernet is trademark of Xerox Corporation. ® Postscript is trademark of Adobe Systems Incorporated. ® NetWare is a trademark of Novell, Inc. Apple, AppleTalk, iMac, LaserWriter and Macintosh are registered trad

Summary of the content on the page No. 9

IMPORTANT NOTE:For technical and operational assistance, you must call. Calls must be made from within that country. In USA 1-800-276-7746 In Canada 1-877-BROTHER If you have any comments or suggestions, please write to us at: In Europe European Technical Services 1 Tame Street Audenshaw Manchester, M34 5JE UK In USA Printer Customer Support Brother International Corporation 15 Musick Irvine CA 92618 In Canada Brother International Corporation (Canada), Ltd. - Marketing Dept. 1, rue Hôtel de Vi

Summary of the content on the page No. 10

IMPORTANT INFORMATION: REGULATIONS Intel Copyright and License Information This products includes object code from Intel’s UPnP SDK. The following is the copyright and licensing information for Intel UPnP SDK. Copyright© 2000 Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice this list of condi

Summary of the content on the page No. 11

1Unix Printing 1 Printing from Unix/Linux Using TCP/IP Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers support TCP/IP, this capability allows a printer to be shared on a UNIX Ethernet network. As with all protocols, TCP/IP communications can proceed concurrently while other protocols are active, this means that UNIX, NetWare, Apple, and other computers can share the same Br

Summary of the content on the page No. 12

5 The default name for a Brother print server is usually BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address of the print server). 6 When configuring the PRINTCAP file, pay particular attention to the service names, BINARY_P1 and TEXT_P1. TCP/IP Brother print servers appear to the network as a UNIX host computer with a unique IP address running the lpd (line printer daemon) protocol. As a result, any host computer that supports the Berkeley remote LPR command can spool

Summary of the content on the page No. 13

The actual format of the entry may vary depending on your system, check your system documentation and also note the format of other entries in the /etc/hosts file. The node name in this file does not necessarily need to be the same as the one that is actually configured into the Brother print server (the name that appears on the printer settings page), however, it is good practice to make the names the same. Some operating systems, such as HP-UX, do not accept the "_" character in the def

Summary of the content on the page No. 14

3 Configure the /etc/printcap file on each host computer to specify the local print queue, the print server name (also called remote machine or rm), and the print server service name (also called remote printer, remote queue, or rp), and the spool directory. This step applies to the majority of UNIX systems, including Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd option required), DEC ULTRIX, DEC OSF/1, and Digital UNIX. SCO UNIX users should follow these steps, but shou

Summary of the content on the page No. 15

The rm and rp options are not available on some UNIX systems, so if necessary check your documentation to determine the equivalent options. Users of Berkeley-compatible UNIX systems can use the lpc command to obtain the printer status: %lpc status laser1: queuing is enabled printing is enabled no entries no daemon present Users of AT&T-compatible UNIX systems can generally use the lpstat or rlpstat commands to obtain similar status information. Because this procedure varies from system to

Summary of the content on the page No. 16

Linux Configuration If you do not wish to use the command line interface to configure your Linux distribution, you may wish to use the Linux Printer System Manager application on your GUI. To do this, do the following: 1 From the Linux Printer System Manager screen, click the Add button. 2 You will now be asked to specify which Printer type you are using, select the Remote Unix (lpd) Queue option and click OK. 3 You must now specify the remote host name, remote queue name and the input fil

Summary of the content on the page No. 17

HP-UX Configuration In the case of HP-UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1 Execute the sam program. From the list of options, select Printers and Plotters. 2 Select LP Spooler. 3 Select Printers and Plotters. 4 Select Actions and then Add Remote Printer/Plotter. 5 Enter any name as the Printer Name (this will be the name of the print queue). 6 Enter the IP address of the print server as the Remote System Name. 7 Enter the desired print se

Summary of the content on the page No. 18

Earlier versions of HP-UX use similar procedures to 10.xx users: 1 Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer). 2 Enter the following remote printer settings (the other settings do not matter): ■ Line printer name (user-selectable). ■ Remote system name (the print server name; must match what is in hosts file or use print server IP address). ■ Remote printer queue (Print server binary or text service name, e.g. BINARY_P1 or TEXT_P1). ■ Remote

Summary of the content on the page No. 19

The procedure for pre-V4.0 systems is as follows. 1 Enter smit and select devices. 2 Select printer/plotter. 3 Select manage remote printer subsystem. 4 Select client services. 5 Select remote printer queues. 6 Select add a remote queue. 7 Enter the following remote queue settings: ■ Name of queue to add (user selectable). ■ Activate the queue (Yes). ■ Destination host (print server name; must match name in / etc/hosts file or use the print server IP address) ■ Name of queue on remote printer (p

Summary of the content on the page No. 20

If this is the first printer configured, you must also use the lpsched command prior to the accept command. As an alternative, you may use Printer Manager in the Admintool utility under OpenWindows. Select Edit, Add, and Add Access to Remote Printer. Then enter the print server name in the format prnservername!\prnserverservice as described above. Make sure that the printer server OS is set to BSD (the default setting), and click Add. Note that we recommend that you use the /etc/hosts file


Similar user manuals
# User manual Category Download
1 Brother 8710DW All in One Printer 17
2 Brother All in One Printer BE-1206B-BC All in One Printer 35
3 Brother All in One Printer 340 All in One Printer 21
4 Brother ADVANCED MFC-7460DN All in One Printer 27
5 Brother ADVANCED MFC-7360 All in One Printer 30