Summary of the content on the page No. 1
Instructions
Please read this manual before operating this scanner.
Summary of the content on the page No. 2
Connecting the Scanner to a Computer Connect the CR-190i to a computer as follows. Make sure to install the A Install the software software before connecting the scanner to a computer. Install the Scanning Utility for CR-190i in the setup disc provided • If you connect the computer and turn ON the CR-190i before with the CR-190i. (See “Installing the Software,” on p. 19.) installing the software, the following wizard screen appears. If this happens, click [Cancel], turn OFF the CR-190i, and
Summary of the content on the page No. 3
2. BACK-UP COPY: You may make one copy of the SOFTWARE THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR EXCLUSIVE READ CAREFULLY BEFORE OPENING THE solely for a back-up purpose or copy the SOFTWARE onto the REMEDY IN CONNECTION WITH THE SOFTWARE AND SEALED DISK PACKAGE permanent storage device (e.g. a hard disk) of your computer and ACCOMPANYING DOCUMENTATION. CANON SOFTWARE LICENSE AGREEMENT retain the original for a back-up purpose. Except as expressly 5. TERM: This Agreement is effective up
Summary of the content on the page No. 4
® FCC REGULATIONS (For 120V model) International ENERGY STAR Office Equipment Program ® Check Reader, Model M111021 As an ENERGY STAR Partner, CANON ELECTRONICS INC. has determined that this ® This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: machine meets the ENERGY STAR Program guidelines for energy efficiency. ® (1) This device may not cause harmful interference, and (2) this device must accept any interference The International ENERGY
Summary of the content on the page No. 5
Trademarks Disclaimers The information in this document is subject to change without notice. � Canon and the Canon logo are registered trademarks, of Canon Inc. in the United States and may also be trademarks or registered CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, trademarks in other countries. EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, � imageFORMULA is a trademark of CANON ELECTRONICS INC. THEREOF, WARRANTIES
Summary of the content on the page No. 6
INTRODUCTION Thank you for purchasing the Canon Check Reader CR-190i. Symbols Used in This Manual Please read this manual thoroughly before using the machine in order The following symbols are used in this manual to explain procedures, to familiarize yourself with its capabilities, and to make the most of its restrictions, handling precautions, and instructions that should be many functions. observed for safety. Manuals for the CR-190i WARNING The following manuals are provided with the CR-
Summary of the content on the page No. 7
Preparing the Ink Cartridge.......................................................... 23 Table of Contents About the Ink Cartridge .......................................................... 23 Connecting the Scanner to a Computer............................................... 2 Setting the Ink Cartridge and Adjusting the Print Position ..... 23 INTRODUCTION ................................................................................. 6 Software................................................
Summary of the content on the page No. 8
Maintenance ................................................................................ 51 Replacing the Ink Cartridge.................................................... 51 Replacing the Ink Disposal Tank............................................ 52 Replacing the Rollers ............................................................. 53 Adjusting the Separation Roller Gap...................................... 57 Specifications................................................................
Summary of the content on the page No. 9
Important Safety Instructions ■ Handle the scanner with care. Avoid shock and vibration to the Handling scanner caused by reckless handling. If you suspect the scanner has been accidentally damaged, turn OFF the power switch WARNING immediately and disconnect the power cord from the power outlet. ■ Never install and operate the scanner near flammable substances, Contact your local authorized Canon dealer or service such as alcohol, paint thinner, benzene, or any other type of volatile rep
Summary of the content on the page No. 10
■ Keep the area around the power outlet clear of all obstacles so you Installation Location can disconnect the power cord easily at all times. ■ Never spill water or volatile solutions (alcohol, benzene, paint thinner) into the scanner. Doing so may cause a fire or electrical 3.9" (100 mm) shock. 5" (125 mm) ■ When the scanner is not being used for a long period of time, disconnect the power cord from the power outlet. ■ Avoid wearing loose fitting clothing, dangling jewelry, long ties, or
Summary of the content on the page No. 11
� Places subject to rapid changes in temperature or humidity Moving the Scanner Condensation occurring inside the scanner may impair image When you move the CR-190i, hold it firmly with both hands and carry it quality. Place the scanner in a room that is within the following range: carefully. Do not hold the scanner by the Eject Stopper. The scanner Room temperature: 50°F to 90.5°F (10°C to 32.5°C) weighs approximately 18.5 lb (8.4 kg). Relative humidity: 20% to 80% RH Use the recommended ope
Summary of the content on the page No. 12
Introduction to the CR-190i This chapter describes the features of the CR-190i scanner, what Supports OCR (Optical Character Recognition) comes packaged in the box, and the names and functions of parts on Character images, such as E13B, OCR-A, OCR-B, and check writer are the scanner. recognized as characters by the OCR function. Easy to Maintain Features of the CR-190i Large Maintenance Covers make handling paper jams and cleaning The Canon Check Reader CR-190i is a scanner with magnetic hea
Summary of the content on the page No. 13
Ultrasonic Double Feed Detection and Double Feed Detect Packaging: What Is in the Box? OFF Button (Scanning Utility for CR-190i) The scanner detects double-fed documents using ultrasonic, and can Make sure that you have everything shown below. Check every item turn OFF the function with the Function Button. you have removed from the box. If any items are missing, contact your local authorized Canon dealer. Drop-Out Color This function enables drop-out scanning of a specific color in the doc
Summary of the content on the page No. 14
Part Names This section describes the names and functions of each part. Before you connect the CR-190i, familiarize yourself with its parts and their functions. Front View Operation Buttons Built-in Nozzle Cleaning Pad Ink Cartridge Ink cartridge is not included. Purchase the ink cartridge JOG: Uses vibration to align the documents. (Jogger) separately. (See “About the Ink Cartridge,” on p. 23.) Function (F): You can assign this button to any function from Roller Cover an application. When usi
Summary of the content on the page No. 15
Scanner Unit This unit scans the documents. Back Maintenance Cover Open this cover to clear paper jams or to clean the scanner. Top Cover Eject Pocket Documents are separated with flappers into three pockets. (See p. 36) Eject Stopper Pull out the Eject Stopper to prevent documents from falling off the output tray. Separation OFF Mode Button Adjustment Dial Cover Use this button when you want to scan the following documents (See “Separation OFF Mode,” on p. 37.): � Thick documents � Document
Summary of the content on the page No. 16
Rear View Exterior Dimensions Ink Disposal Tank Pocket Units: inches (units in parenthesis are millimeters) 22.9" (581 mm) (with the eject stopper open) 18.7" (476 mm) Connector Air Vent Power Cord Connector Connect the power cord provided with the scanner to this connector. CAUTION To avoid overheating and causing a fire, never block the air vents on the back of the scanner. Connector USB Connector Connect a Hi-Speed USB 2.0 compatible cable. (See “USB Connections,” on p. 20.) 16 7" (177 mm)
Summary of the content on the page No. 17
Preparation Before Use This chapter describes how to prepare the scanner to scan IMPORTANT documents. • To have the device drivers installed automatically when the computer recognizes the CR-190i, the software needs to be installed before the Setting Up the Scanner CR-190i is connected to the computer. Perform the following steps to set up the CR-190i. Refer to the section � If you connect the computer and turn ON the CR-190i before installing the for each step for details about that step. s
Summary of the content on the page No. 18
IMPORTANT Checking Your Operating Environment � If you use the USB interface that was provided as standard with your The following computer system requirements are recommended for computer: using the CR-190i. � Use the most recently available USB 2.0 driver provided by Microsoft. Contact your local authorized Canon dealer for more detailed Operating Systems: information. � Microsoft Windows XP (32bit) SP3 or later � Not all USB interfaces provided as standard with personal computers � Micro
Summary of the content on the page No. 19
A Turn ON your computer, and log on to Windows. Installing the Software The following software applications are provided on the setup disc that IMPORTANT is packaged with the scanner. Make sure to open and read the Be sure to log on as the Administrator. Readme.txt file on the setup disc before installing the software. B Insert the setup disc into the CD-ROM drive. Scanning Utility This manual assumes that “D” is assigned to your CD-ROM drive. Canon Scanning Utility is an application that provi
Summary of the content on the page No. 20
D Click [Accessories], and then click [Run]. Connecting the Scanner to a Computer The only way to connect the scanner to your computer is with a USB cable. CAUTION • Do not turn OFF the scanner or remove the interface cable when an application is running. � Turn OFF the computer and the scanner before changing the cable. USB Connections Connect the scanner and the computer with the cable provided or a Hi-Speed USB 2.0 cable. E Enter “D:\SU190i\setup.exe” in the [Open] fields, and then click [
