Summary of the content on the page No. 1
DIGITAL PHOTO FRAME
Instruction Manual
JP-177, JP-187, JP-197
Please read this manual carefully before operating and save it
for future reference.
Have a question? Please visit http://www.jWIN.com
Summary of the content on the page No. 2
Digital Photo Frame V10M10_IM_EN_09252007 - 1 - www.jWIN.com
Summary of the content on the page No. 3
Digital Photo Frame V10M10_IM_EN_09252007 USER SAFETY GUIDE Instructions on Environmental Protection Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By r
Summary of the content on the page No. 4
Digital Photo Frame V10M10_IM_EN_09252007 USER SAFETY GUIDE Important Safety Instructions 1. READ INSTRUCTIONS - All safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained in a secure place for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be observed. 4. FOLLOW INSTRUCTIONS - All operati
Summary of the content on the page No. 5
Digital Photo Frame V10M10_IM_EN_09252007 USER SAFETY GUIDE Important Safety Instructions – Continued 11. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service professional when: a. Objects have fallen into, or liquid has been spilled into the appliance’s apertures. b. The appliance has been exposed to rain. c. The appliance has been dropped and suffered damage. d. The appliance does not appear to operate normally, or exhibits a c
Summary of the content on the page No. 6
Digital Photo Frame V10M10_IM_EN_09252007 USER SAFETY GUIDE FCC Notice to U.S. Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Refer to 47 CFR Sec. 15.19. This equipment has been tested and found to comply with the limits for a
Summary of the content on the page No. 7
Digital Photo Frame V10M10_IM_EN_09252007 USER SAFETY GUIDE Industry Canada Notice to Canadian Users Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Refer to IC RSS 210 Sec. 5.11. The term “IC” before the certification or registration number only means that the registration
Summary of the content on the page No. 8
Digital Photo Frame V10M10_IM_EN_09252007 GETTING STARTED Thank you for purchasing the JP-177 / JP-187 / JP-197. Unpack the unit and make sure all the accessories are put aside so they will not be lost. Digital photo frame with 7” TFT LCD widescreen • Displays digital photos on 7” widescreen • Capable of JPEG, MP3 files • Reads various memory cards, such as SD, MMC, and MS • USB2.0 host • Alarm clock function with calendar • Stereo speakers • Suppor
Summary of the content on the page No. 9
Digital Photo Frame V10M10_IM_EN_09252007 GETTING STARTED Location of Controls - 8 - www.jWIN.com
Summary of the content on the page No. 10
Digital Photo Frame V10M10_IM_EN_09252007 GETTING STARTED Location of Controls- continued - 9 - www.jWIN.com
Summary of the content on the page No. 11
Digital Photo Frame V10M10_IM_EN_09252007 GETTING STARTED Location of Controls- continued 1. Display Screen 10. DOWN Button 2. AV OUT Jack 11. LEFT Button 3. HEADPHONE Jack 12. RIGHT Button 4. REMOTE Sensor 13. PLAY/PAUSE Button 5. STAND 14. STOP Button 6. POWER Button 15. MEMORY CARD Slot 7. DC 12V INPUT Jack 16. USB Port 8. FUNCTION Button 17. SPEAKERS 9. UP Button Location of Controls on the Remote 1. DISPLAY Button 1 15 2. STANDBY Button 2 1
Summary of the content on the page No. 12
Digital Photo Frame V10M10_IM_EN_09252007 GETTING STARTED Location of Controls on the Remote- continued 24. NEXT Button 26. CARD Button 25. PREV Button 27. USB Button General Setup 1. Plug one end of the AC adapter into the AC Jack in the JP- 177, JP-187, or JP-197 and the other end to a standard AC electrical outlet. 2. Insert a memory card into the appropriate slot on the side of the picture frame. Note: This unit is compatible with MMC, MS, SD memory
Summary of the content on the page No. 13
Digital Photo Frame V10M10_IM_EN_09252007 GETTING STARTED Connecting to a TV To view your digital photos on a TV screen, monitor, or other external device, please follow these illustrations. Attaching the Stand Follow these instructions to connect the stand. 1. Connect the Stand to the back of the photo frame as shown. 2. Slide the Stand up or down to adjust the angle. - 12 - www.jWIN.com
Summary of the content on the page No. 14
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS System Setup While in the main menu, press the NAVIGATION buttons to select the Setup option to display setup menu. Press the NAVIGATION buttons to select the desired item. Press the NAVIGATION buttons again to choose from various sub-options for each item on the screen. Photo setting • Interval time: To browse pictures at interval time, there are several options: 5sec./10sec./15sec./30./1min
Summary of the content on the page No. 15
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS Auto play The options of auto play include photo and music. Display setup • TV output: This option is use to select AV output to TV or TFT panel. • Display type: This option is used to select the Full screen and normal type. • Brightness/contrast: This option is used to select video brightness and contrast. • TFT Brightness/TFT contrast/TFT saturation: to select TFT LCD panel brightness,
Summary of the content on the page No. 16
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS Viewing Photos After startup, the main menu will appear on the screen. Use the NAVIGATION [ ] buttons to choose the photo option and press ENTER to select. In the photo menu, the unit will browse pictures automatically one-by-one. During the photo play, press the STOP button to enter the thumbnail mode. In thumbnail mode, photo information is displayed on the bottom
Summary of the content on the page No. 17
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS Slide Show Select the Slide Show option for the images to display one-by- one. To rotate pictures in the Slide Show mode use the NAVIGATION buttons as follows: • Vertical (flip vertically) • Horizontal (flip horizontally) • 90° (clockwise) • 90° (counter-clockwise) Playing Music In the main menu, press the NAVIGATION Buttons to select the Music option. Press ENTER to confirm. • In Mus
Summary of the content on the page No. 18
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS Clock In the main menu, press NAVIGATION buttons to select Clock option. Press the ENTER button to confirm. 1. Display: Choose CLOCK to display a clock on screen only or choose CLOCK & CALENDAR to display a calendar with clock on screen. 2. Set Time: Select this item to change time information with hh:mm:ss format. 3. Exit: Select this item to return to main menu. Alarm In the main menu, pr
Summary of the content on the page No. 19
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS Remote Control Operation • TFT on/off: Press the TFT ON/OFF Button to turn on backlight of TFT-LCD. Press it again to turn off backlight of TFT-LCD. • Speaker: During playback, press the SPEAKER button to close the speaker or phones output. • Numeric Keyboard: These buttons are used to input the time, as well as media file numbers. When a numeric item is displayed on the screen, press the NUM
Summary of the content on the page No. 20
Digital Photo Frame V10M10_IM_EN_09252007 OPERATIONAL INSTRUCTIONS Remote Control Operation- continued • Menu: Press the MENU button during playback to return the main menu. • Subtitle: Press the SUBTITLE button repeatedly to select subtitle languages or control subtitle on/off. Note: This function is media specific. • L/R: During playback, press the L/R button to select Left/right/stereo channel mode. Note: This function is media specific. • Repeat: Press
