Summary of the content on the page No. 1
Digital Access Keypad Manual
User Operation for the SK-1011-SQ
n n n n
Note: indicates
1. Using the User Codes:
the inhibit code.
A. User codes operate the door (4-8 digits long).
u u u u
Note: indicates
u u u u
Press
the user code.
#
B. The key must also be pressed if the keypad is in manual-entry mode.
Note: indicates X X X X
u u u u
Press #
the master code.
2. Using the Master Code:
The Master Code can be used to operate the doo
Summary of the content on the page No. 2
EG In - Egress DAP N.O. C. N.C. (-) AC/DC (+) AC/DC DAP Digital Access Keypad Manual Digital Access Keypad Manual TABLE OF CONTENTS REPROGRAM THE KEYPAD (CERTAIN DATA) To change certain data in the keypad (such as to delete or change user codes), do the following: Introduction ................................................................................................................ 2 1. Enter program mode by keying in the master code and the key: * Unique features ..................
Summary of the content on the page No. 3
Digital Access Keypad Manual Digital Access Keypad Manual INSTALLER PROGRAMMING SPECIFICATIONS: These functions should only be used by professional installers, as incorrect entries can disable the entire keypad function. Power: Enter Programming Mode (DEFAULT: ) 0 0 0 0 � Operation voltage -- 12-24 Volts AC/DC. No jumper needed to set voltage. Enter Master code Confirm Function � Stand-by current drain -- 10mA @12VDC. * X X X X Enter into programming mode * *Key in the Master Co
Summary of the content on the page No. 4
Digital Access Keypad Manual Digital Access Keypad Manual USER PROGRAMMING PREPARING TO PROGRAM THE KEYPAD Enter Programming Mode Before programing the SK-1011-SQ, you will need to first determine the following information: Enter Master code Confirm Function X X X X 1. The master code -- Allows the system administrator to program or operate the keypad. Enter into programming mode * Note: indicates the Master code. X X X X 2. The user code or codes -- Allows users to use the
Summary of the content on the page No. 5
— 6 — — 5 — EK-1121SQxx - User Control Chart Relay Output #1:Output: Shunt / Momentary (____secs.) Programmed For__________________________________ USER ID User Name Access Code USER ID User Name Access Code 00 SAMPLE - John Doe 54321 00 SAMPLE - John Doe 54321 00 50 01 51 02 52 03 53 04 54 05 55 06 56 07 57 08 58 09 59 10 60 11 61 12 62 13 63 14 64 15 65 16 66 17 67 18 68 19 69 20 70 21 71 22 72 23 73 24 74 25 75 26 76 27 77 28 78 29 79 30 80 31 81 32 82 33 83 34 84 35 85 36 86 37 87 38 88 39 8
