Haier DW12-HFE2ME user manual

Summary of the content on the page No. 1

Installation
Domestic Dishwasher
DW12-HFE2ME
Diagram
1(2)
3(1)
N
IS
1
IG LS
1
L
4(2) 2(1)
2
3
SC LC
F
1 34 5 6
2 7 8
CnL1
L
1 4
M
IAQS
D-ED
1/2 2
ML
1
2
2
3
C
S
C
CnP3
1
1
CnP2
2
AQS
12
3
11
4
1
10
5
9
6
8
7
7
8
6
5
SCHEDA DI 4
POTENZA 3
e 2
CnP1
CONTROLLO 1
6
ISS 5
4
3
R
2
1
SENSORE
TEMPERATURA
RELE’
GB
220/240V 50HZ

Summary of the content on the page No. 2

Safety Hints Close-up View (Interior) Carefully read the instructions contained in this manual, as they - If the appliance malfunctions turn off water supply to the appli- provide important information which is essential to safe and proper ance and disconnect the plug from the wall socket. Refer to installation, use and maintenance of this appliance. the section entitled, "Troubleshooting." If you cannot solve the problem, contact a authorised service centre. This appliance complies wit

Summary of the content on the page No. 3

Detergent and Rinse Aid









Salt









Salt Adjusting Salt Consumption Detergent Rinse Aid The hardness of the water varies from place to place. If hard The dishwasher is designed to allow for adjusting the amount of Detergent specifically intended for use with dishwashers must This product makes dishes sparkle and helps them to dry with- water is used in the dishwasher, deposits will form on the dishes salt consumed based on the hardness of the water used. This is be used. The

Summary of the content on the page No. 4

Turning on the Appliance Loading the Dishwasher Before placing the dishes in the dishwasher, remove larger food Starting a wash cycle
Setting the Wash Cycle with a Delayed Start Time Lower Rack particles to prevent the filter from becoming clogged, which results Upper Rack After having completed all of the installation steps in the preced- in reduced performance. ing paragraphs, turn on the water all the way and press the ON- By pressing the "D" button (see close-up view-'Control panel") If t

Summary of the content on the page No. 5

Wash Cycle Table Energy Saving Tips - Use the right amount of detergent: if you use too much detergent, - It is important to try and run the dishwasher when it is fully the result will not be cleaner dishes, but, rather, a greater nega- loaded in order to save on energy. To prevent odours from form- Cycle Selection Cycle Description of Cycle Detergent Rinse Aid tive impact on the enviroment. ing and food from caking onto the dishes, you can run the hold Information cycle. - Choose the right

Summary of the content on the page No. 6

Installation Cleaning and Special Maintenance Positioning the Appliance The connection must be made to the hot water line following the Position the appliance in the desired location. The back should Filter Assembly same procedures as those for the connection to the cold water rest against the wall behind it, and the sides, along the adjacent For best performance and results, the filter assembly must be line. cabinets or wall. The dishwasher is equipped with water supply cleaned. Anti-Flooding P