Jackson WH-44 Series user manual

Summary of the content on the page No. 1

WH SERIES RACK CONVEYOR DISHMACHINES
Manufactured in the United States by:
An Company
RETROFIT INSTRUCTIONS
FOR ECOLAB MODELS:
WH-44 SERIES MODELS
(FLOAT SWITCHES)
June 14, 2004 www.ecolab.com
P/N 07610-002-94-54 (Revision A)

Summary of the content on the page No. 2

Summary of the content on the page No. 3

REVISION MADE APPLICABLE REVISION DETAILS DATE BY ECN Updated instructions to new format; was part number 05700-002- A 06-14-04 CBW 7080 24-93. 3

Summary of the content on the page No. 4

RETROFIT INSTRUCTIONS FOR OLD-STYLE FLOAT SWITCH C A B WARNING: Inspection, testing and repair of electrical equipment should only be performed by a qualified service technician. Many of the tests require that the unit have power to it and live electrical components be exposed. USE EXTREME CAUTION WHEN TESTING THE MACHINE. 1. Turn of machine. The power button for the machine is indicated as Item A in the figure above. In addition to turning the power off at the power switch, power must be secur

Summary of the content on the page No. 5

RETROFIT INSTRUCTIONS FOR OLD-STYLE FLOAT SWITCH (CONTINUED) 3. Completely drain the unit. Important: There must be no water left in the machine in order to perform this retrofit process. 4. Remove the lower front heater box cover (Item B on the figure). WARNING: Removing the heater box cover exposes potentially live electrical components. Ensure that electrical power has been secured to the unit at the service breaker before attempting to work on any com- ponents within the heater box. 5. Disco