Summary of the content on the page No. 1
User manual
Dishwasher
ZDF 222
Summary of the content on the page No. 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ 15 Control panel _ _ _ _ _ _ _ _
Summary of the content on the page No. 3
Safety information • Under no circumstances should you attempt In the interest of your safety and to ensure the to repair the machine yourself. Repairs car- correct use, before installing and first using the ried out by inexperienced persons will cause appliance, read this user manual carefully, in- injury or serious malfunctioning. Contact cluding its hints and warnings. To avoid your local Service Force Centre. Always in- unnecessary mistakes and accidents, it is im- sist on genuine spare part
Summary of the content on the page No. 4
or if the control panel, work top or plinth area Installation are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine. If your dishwasher is damaged con- hazard. tact your supplier. • All sides of the dishwasher must never be • All packaging must be removed before use. drilled to prevent damage to hydraulic and • Any electrical and plumb
Summary of the content on the page No. 5
Programme selector dial and On/Off switch • when in this position, the machine is switched off (corresponding light off), • when the marker on the dial corresponds with a programme, the machine is switched on and a pro- gramme is selected (programme selector indicator light on) Start/cancel button • Starting the washing programme: 1. Select a washing programme. 2. Press the Start/Cancel button (corresponding light on). IMPORTANT! Once the programme has started, if you want to change the selectio
Summary of the content on the page No. 6
Indicator lights Wash indicator light Illuminates when a washing programme is set and re- mains illuminated for all the duration of the washing programme. Turns off when the washing programme has ended. End of programme Illuminates when the washing programme has ended. Switch off the dishwasher by returning the programme selector dial to the Off position. The On/Off indicator light turns off. It also has added functions of visual signalling as: • the setting of the water softener, • intervention
Summary of the content on the page No. 7
Programme Degree of soil Type of load Programme description Bio 50° Normal soil Crockery and cutlery Prewash 2) Main wash 1 intermediate rinse Final rinse Drying Rinse and Hold Any. 1 cold rinse (to avoid food Partial load (to be completed later in the day). scraps from sticking together). This programme does not require the use of deter- gent. 1) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4 persons who only wish to loa
Summary of the content on the page No. 8
If you decide in future to use separated deter- – Adjust the water hardness setting according gents, we advise that you: to the hardness of the water in your area. – Fill up the salt and rinse aid container. – Adjust the rinse aid dosage – Adjust the water hardness setting to the highest level and perform 1 normal washing programme without loading any dishes. Set the water softener The dishwasher is equipped with a water grees (°dH), French degrees (°TH) and mmol/ softener designed to remove min
Summary of the content on the page No. 9
Setting the water softener manually (see table) The water softener is factory set at position 2. Set switch to position 1 or 2 Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must be switched off . Release the button. The end of programme indicator light will flash. The number of flashes corresponds to current level set. The end of programme indicator light might flash 5 times, for example. The flashing is repeated every 5
Summary of the content on the page No. 10
Unscrew the cap. Only before filling with Using the funnel provided, salt for the first time, fill pour in the salt until the the salt container with wa- container is filled with salt. ter. IMPORTANT! Immediately start a complete programme. IMPORTANT! Water will overflow from the container as salt is added. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Top up the special salt when the light on the control panel illuminates. 10
Summary of the content on the page No. 11
Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling is which overflows. Close indicated by "max" the lid and press until it locks. IMPORTANT! CAUTION! Top up the rinse aid when the light on the control panel Never fill the rinse aid dispenser with any other sub- illuminates. stances (e.g. dishwasher cleaning agent, liquid deter- gent). This would damage the appliance. Adjusting the dosage of rinse aid Increase the dose if there are dr
Summary of the content on the page No. 12
Loading cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each other. can absorb water may not be washed in the – To avoid damage to glasses, they must dishwasher. not touch. • Before loading the dishes, you should: – Lay small objects in the cutlery basket. – Remove all left over food and debris. • Plastic items and pans with non stick coat- – Soften remnants of burnt food in pans ings have a tendency to reta
Summary of the content on the page No. 13
Load cutlery. For best re- Place knives and other Load the lower basket. Arrange serving dishes and sults we recommend you items of cutlery with sharp large lids around the edge of the basket. to use the cutlery grid pro- points or edges with their vided (if the size and di- handles facing upwards. mensions of the cutlery Risk of injury! allow it) Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded
Summary of the content on the page No. 14
To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mecha- nism is engaged and the basket is stable. To lower the basket to the original position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it. IMPORTANT! IMPORTANT! Never lift or lower the basket on one side only When the basket is in the h
Summary of the content on the page No. 15
For programmes with pre- When using detergent Close the lid. wash add an additional tablets: place detergent detergent dose in com- tablets in compartment A. partmentB. Unloading the dishwasher • Hot dishes are sensitive to knocks. • Water may appear on the sides and the door The dishes should therefore be allowed to of the dishwasher as the stainless steel will cool down before removing from the appli- eventually become cooler than the dishes. ance. CAUTION! • Empty the lower basket first
Summary of the content on the page No. 16
Clean filters A, B and C Turn the handle about 1/4 Remove filter A from the thoroughly under running turn anticlockwise and re- base of the washing com- water. move filters B and C. partment. Put the flat filter A back in Replace the filters and the base of the washing lock by turning the handle compartment and ensure clockwise to the stop. that it fits perfectly under the two guidesD. Cleaning the spray arms Internal cleaning Ensure that the seals around the door, the de- NEVER try to remove
Summary of the content on the page No. 17
2. Leave the door ajar to prevent the forma- 1. Unplug it. tion of any unpleasant smells. 2. Turn the water tap off. 3. Leave the inside of the machine clean. 3. Remove the water inlet and discharge ho- ses. Frost precautions 4. Pull the machine out together with the ho- ses. Avoid placing the machine in a location where Avoid over tilting the machine during transpor- the temperature is below 0°C. If this is tation. unavoidable, empty the machine, close the ap- pliance door, disconnect the water
Summary of the content on the page No. 18
Something not working The dishwasher will not start or stops during Switch off the dishwasher, open the door and operation. carry out the following suggested corrective ac- Certain problems are due to the lack of simple tions. maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Fault code and malfunction Possible cause and solution • continuous flashing of the start/cancel indicator • The water tap is blocked or
Summary of the content on the page No. 19
Once these checks have been carried out; This information can be found on the rating close the dishwasher’s door and switch on the plate located on the side of the dishwasher appliance. Press the button of the programme door. that was running before the intervention of the So that you always have these numbers at alarm. The programme will continue from the hand, we recommend you to make a note of point at which it was interrupted. them here: If the malfunction or fault code reappears con- Mod. :
Summary of the content on the page No. 20
Technical data Dimensions Width x Height x Depth (cm) 60,0 x 85,0 x 61,0 Electrical connection Information on the electrical connection is given on the rating plate on the Voltage - Overall power - Fuse inner edge of the dishwasher’s door. Water supply pressure Minimum - Maximum 0,05 - 0,8 (MPa) Capacity place settings 12 Max. weight kg 40,5 Noise level dB(A) 49 Consumption values The consumption values are intended as a iations of the power supply and the amount of guide and depends on the pres
