Summary of the content on the page No. 1
DISHWASHER
ZDT 5053
www.zanussi.co.uk
152959 65/2 INSTRUCTION BOOK
UK
Summary of the content on the page No. 2
Contents Safety instructions 3 Installation instructions 18 Building-in 18 Disposal 3 Levelling 18 Fixing to adjacent units 18 Economical and ecological dishwashing 3 Water supply connections 18 Description of the appliance 4 Water outlet hose connection 19 Electrical connection 19 The control panel 5 Audible signals 5 Hints for test centres 20 Prior to using for the first time 6 Setting the water softener 6 Filling with dishwasher salt 7 Rinse aid 7 In daily use 8 Loading cutlery and dishes 8 T
Summary of the content on the page No. 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Summary of the content on the page No. 4
Description of the appliance 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket IN155 4
Summary of the content on the page No. 5
The control panel On/Off button Washing programmes Programme selection/cancel button Indicator lights Programme indicator lights "Programme selection/cancel" button: the Audible signals selection of a washing programme occurs by the means of this Audible signals have been introduced to help indicate which button, press it until the indicator light corresponding to the operations the dishwasher is performing. desired washing programme illuminates (see "Washing - end of washing programme, programm
Summary of the content on the page No. 6
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically 1. Ensure that the electrical and water connections comply The dishwasher is factory set at level 5. with the installation instructions 1. With the dishwasher switched off, press the On/Off button. 2. Remove all packaging from inside the appliance The END OF CYCLE indicator light flashes (setting mode). 3. Set the water softener In case salt and/or rinse aid refilling is necessary the
Summary of the content on the page No. 7
Filling with dishwasher salt Rinse aid Only use salt specifically designed for use in Rinse aid is automatically added during the last rinse, ensuring dishwashers. thorough rinsing, and spot and streak free drying. All other types of salt not specifically designed for use in The dispenser, which is positioned inside the door, holds about a dishwasher, especially table salt, will damage the water 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing softener. programmes, depending up
Summary of the content on the page No. 8
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes aid Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent . Before loading the dishes, you should: Select a wash programme suitable for the cutlery and - Remove large left-overs. dishes. - Soften remnants of burnt food in pans Start the wash programme. When
Summary of the content on the page No. 9
The upper basket Use of detergent The upper basket is designed for plates (dessert plates, Only use detergents specifically designed for use in saucers, dinner plates of up to 24 cm in diameter), salad dishwashers. bowls, cups and glasses. We recommend the use of Finish detergents. Arrange items on and Using no more than the correct amount of detergent underneath the cup racks so contributes to reducing pollution. that water can reach all surfaces. Please observe the manufacturer’s dosing and
Summary of the content on the page No. 10
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Summary of the content on the page No. 11
Washing programmes Programme Degree of soil Cycle description (3) Consumption values and Energy Water Programme type of load consumption consumption duration (in kWh) (in litres) (in minutes) Hot prewash Main wash up to 70°C Heavy soil. 70° INTENSIVE 2 warm rinses Crockery, cutlery, pots 75 - 85 1,5 - 1,7 18 - 20 1 hot rinse and pans Drying Cold prewash Main wash up to 65°C Normal soil. 2 warm rinses 65° NORMAL 105 - 115 1,3 - 1,5 20 - 25 Crockery and cutlery 1 hot rinse Drying Fresh soil. Ma
Summary of the content on the page No. 12
Starting a washing programme In this fully integrated appliance the controls are located on the 5. End of the washing programme top of the door. When selecting a washing programme, the The dishwasher will automatically stop. An audible signal door needs to be slightly open. informs you of the end of the washing programme. Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will 1. Check that the baskets have been be cooler and the dryi
Summary of the content on the page No. 13
Maintenance and cleaning Clean the external surfaces of the machine and control panel Attention! with a damp soft cloth. If necessary use only neutral Under no circumstances may the dishwasher be used without detergents. Never use abrasive products, scouring pads or filters. solvent (acetone, trichloroethylene etc....). Incorrect repositioning and fitting of the filters will produce Ensure that the seals around the door, the detergent and rinse poor washing results. aid dispensers are cleaned r
Summary of the content on the page No. 14
Something not working Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee. ...a fault code appears The dishwasher will not start or stops during operation. Open the dishwasher’s door. The inter
Summary of the content on the page No. 15
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescale deposits on the di
Summary of the content on the page No. 16
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read t
Summary of the content on the page No. 17
Guarantee Conditions Standard guarantee conditions European Guarantee We, Zanussi, undertake that if within 12 months of the date of If you should move to another country within Europe then your purchase this Zanussi appliance or any part thereof is proved guarantee moves with you to your new home subject to the to be defective by reason only of faulty workmanship or following qualifications: materials, we will, at our option repair or replace the same The guarantee starts from the date you fi
Summary of the content on the page No. 18
Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto a 3/4" inch If possible, position the machine next to a water tap an
Summary of the content on the page No. 19
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following This appliance must be earthed. ways: The manufacturer declines any responsibility should this safety measure not be observed. 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink If the plug that is fitted to your appliance is not suitable for the running into the machine. socket, it must be cut off and the appropr
Summary of the content on the page No. 20
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart). Load: 9 standard place settings Rinse aid setting: position 4 (Type III) Detergent dosage : 5 g + 20 g (Type B)
