Summary of the content on the page No. 1
DISHWASHER
ZSF 2400
822 61 11-28 INSTRUCTION BOOKLET
Summary of the content on the page No. 2
Contents For the user For the installer Technical specifications 12 Important safety information 3 Unpacking the machine 13 Description of the appliance 4-5 - General cleaning - If the machine is damaged - Use - Rinse aid dispenser - Protecting the machine against freezing - Spray arm - Coarse filter Installation 14-15 - Fine filter - Water inlet - Detergent dispenser - Water drainage - Water softener - Power supply - Water softener plug - Cleaning the cabinet The control panel 6 How to load the d
Summary of the content on the page No. 3
Important safety information Before installing and first using the dishwasher, read the instruction booklet carefully, including its hints and warnings. Doing so will ensure that your machine will perform properly and to best advantage. Anyone using the machine should be thoroughly familiar with its instructions for use and safety features. Save these instructions and make sure they remain with the machine if it is moved or sold, so that everyone using it through its life can be properly informe
Summary of the content on the page No. 4
Description of the appliance 2 1 6 3 4 5 Rinse aid dispenser (1) Spray arm (2) Use of rinse aid will result in faster drying of the load and The holes in the spray arm nozzle must be kept clean to gives the dishes a shiny finish. It may be necessary to ensure satisfactory wash results. Inspect the spray arm adjust the quantity of rinse aid dispensed if you live in either regularly. When thorough cleaning is necessary, remove a very hard water or a very soft water area. More is needed the spray a
Summary of the content on the page No. 5
Detergent dispenser (5) Important Only use detergents specially designed for dishwashers. Make sure that the machine is unplugged and the water Pour the detergent into the compartment, for a normal turned off before undertaking any kind of maintenance. load pour about 15g. Since not all detergents are the same, you should also consult the instructions on the General cleaning packet. Remember that the instructions usually refer to Inspect the filters and spray arm nozzle before re-loading full-siz
Summary of the content on the page No. 6
The control panel 1432 1 Temperature selector 55° - Button in Wash phase 65° - Button out 2 Programme knob Rinse phase To start the machine: Turn the selector knob clockwise to the programme start. The On/Off switch is built into the programme timer. To isolate the dishwasher from the mains completely, unplug it from the wall socket. Door lock Press the handle down and open the door. Avoid opening During the water heating process, the timer is the door while the machine is running, steam an
Summary of the content on the page No. 7
How to load the dishwasher The illustration shows the machine loaded with five place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure 1 you will be pleased with the results. • Always place glasses, cups and bowls upside down. • Incline deep dishes (soup plates etc.) so that the water can run off when drying. • Make sure that the dishes do not rest against each other. This is particularly important in regard to the cutlery bas
Summary of the content on the page No. 8
Using your appliance 3 1 2 6 5 4 Proceed as follows: 1. Scrape off solid food remnants. 2. Load the dishwasher. (See “How to load the dishwasher”). Pour approx. 15 g detergent into the detergent dispenser. 3. Close the door. 4. Select the required temperature. 5. Start the dishwasher by turning the programme knob to the start position. 6. Check the filters to see whether they need cleaning when the dishwasher has finished the wash. Detergent recommendations For best results we recommend the us
Summary of the content on the page No. 9
Something Not Working? Before calling out an engineer, please check through the details below because some faults can be rectified easily without the need to call out an engineer. If an engineer is called to resolve a problem listed below or to repair a fault caused by incorrect installation or mis-use a charge will be made, even if the appliance is under guarantee. Fault Check n Is the door closed properly? The machine will not start. n Is there power to the machine? n Has the fuse blown? (Star
Summary of the content on the page No. 10
Service Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk For Customer Service in Ireland please contact
Summary of the content on the page No. 11
Guarantee Conditions Standard guarantee conditions We, Zanussi Electrolux, undertake that if within 12 months of the date of the purchase this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate •
Summary of the content on the page No. 12
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications Dimensions Height 460 mm Width 450 mm Depth 480 mm Weight Net 17 kg Gross 20 kg Capacity 5 settings Water pressures Minimum 50 kPa (0.5 bar) Maximum 1000 kPa (10 bar) Water Temperature Cold water fill only Ele
Summary of the content on the page No. 13
Unpacking the machine If the machine is damaged If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately. Never leave packaging material in a place where children may play with it. Risk of suffocation! Check that the following accessories are supplied with 1 the dishwasher when you unp
Summary of the content on the page No. 14
Installation The dishwasher is intended for installation on a kitchen drainer or worktop. It is important to ensure the dishwasher is level to avoid any difficulty opening and closing the door. Its height can be adjusted with the adjustable feet (8 mm each) in each corner of the dishwasher. Water inlet The dishwasher should be permanently plumbed into a separate cold water supply. The water pressure must be within the limits given in the technical specifications, as it will not function correctl
Summary of the content on the page No. 15
Power supply The dishwasher is supplied with a lead and electrical plug for connection to a 230 V, 13 A earthed wall socket. Before any work is carried out on the dishwasher, it must be isolated from the electric mains supply, for example by removing the plug from the wall socket. Permanent electrical installation must be carried out by an authorised electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not b
Summary of the content on the page No. 16
© Electrolux plc 2005 Technical changes possible
