Summary of the content on the page No. 1
DV201-JPZ.NA1UJJSB_MFL38257070_ENG
DVD PLAYER
XV-N352S
XV-N350B
INSTRUCTIONS
LPT1157-001A
Summary of the content on the page No. 2
CAUTION: The apparatus should not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. RISK OF ELECTRIC SHOCK DO NOT OPEN FCC WARNING: This equipment may generate or use CAUTION: TO REDUCE THE RISK radio frequency energy. Changes or modifications to this OF ELECTRIC SHOCK equipment may cause harmful interference unless the DO NOT REMOVE COVER (OR BACK) modifications are expressly approved in the instruction NO
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERʼS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any pa
Summary of the content on the page No. 4
Contents Introduction . . . . . . . . . . . . . . . . . . .5-8 Operations . . . . . . . . . . . . . . . . .14-19 General Features . . . . . . . . . . . . . . . . . . . . . . .14 About the Symbol Display . . . . . . . . . . . . . .5 Additional Features . . . . . . . . . . . . . . . . . . . . .15 Symbol Used in this Manual . . . . . . . . . . . . . . .5 Playing an Audio CD or MP3/WMA file . . . . .16 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5 Programmed Playback . . . . .
Summary of the content on the page No. 5
Introduction To ensure proper use of this product, please read this Notes on Discs ownerʼs manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player. Should the unit disc by the edges so that fingerprints do not get on require service, contact an authorized service location. the surface. Never stick paper or tape on the disc. About the Symbol Display
Summary of the content on the page No. 6
Types of Playable Discs Regional Code DVD This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labelled as the same as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes Audio CD • Most DVD discs have a globe with one or more (8 cm / 12 cm disc) numbers in it clearly visible on the cover. This number must match your unitʼs regional code or the disc cannot play. In addition, this unit p
Summary of the content on the page No. 7
Front Panel ab cdefghij a 1/' STANDBY/ON f DISPLAY Switches the unit ON and OFF. Accesses On-Screen Display. b Disc Tray g x (STOP) Insert a disc here. Stops playback. c Display window h N (PLAY) Shows the current status of the unit. Starts playback. d Remote Sensor i . (SKIP) Point the remote control here. Returns to the beginning of current chapter or track or go to the previous chapter or track. e Z (OPEN/CLOSE) Opens or closes the disc tray. j > (SKIP) Go to the next chapter or track. 7 Ref
Summary of the content on the page No. 8
AAA Remote Control DISPLAY STANDBY/ON (1/') Accesses On-Screen Display. Switches DVD Player ON and OFF. DVD MENU OPEN/CLOSE (Z) Accesses menu on a DVD disc. Opens and closes the disc tray. b / B / v / V (left/right/up/down) Selects an item in the menu. PAUSE/STEP ( X ) ENTER ( ) Pauses playback temporarily/ press Confirms menu selection. repeatedly for frame-by-frame SETUP playback. Accesses or removes Setup menu. SKIP (. / >) RETURN (O) Go to next chapter or track. Displays the menu of a video
Summary of the content on the page No. 9
Installation and Setup Video and Audio Connections Setting up the Player to Your TV The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, Make sure the DVD player is connected directly to the position the player away from the TV, VCR, or radio, TV and not to a VCR, otherwise the DVD image could or turn off the unit after removing the disc. be distorted by the copy protection system. S-Video – Connect the S-VIDEO OUT jack on the DVD Player to the S
Summary of the content on the page No. 10
Amplifier equipped with 2-channel analog stereo Audio Connection to Optional or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Connect the DVD player to your optional equipment for audio output. Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a Rear of DVD Player multi-channel decoder
Summary of the content on the page No. 11
Displaying Disc Information Initial Settings By using the Setup menu, you can make various on-screen adjustments to items such as picture and sound. You can display various information about the disc You can also set a language for the subtitles and the loaded on-screen. Setup menu, among other things. For details on each Setup menu item, see pages 12 to 13. 1. Press DISPLAY to show various playback information. To display and exit the Menu: The displayed items differ depending on the disc Pre
Summary of the content on the page No. 12
Display Mode LANGUAGE The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or a monitor that is compatib
Summary of the content on the page No. 13
DRC (Dynamic Range Control) AUDIO With the DVD format, you can hear a programʼs Each DVD disc has a variety of audio output options. soundtrack in the most accurate and realistic Set the playerʼs AUDIO options according to the type presentation. However, you may wish to compress the of audio system you use. dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. S
Summary of the content on the page No. 14
Operations General Features Buttons Operations Discs ALL OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause ALL playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- DVD VCD Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the ALL next chapter/track or to return to the beginning of the current chapter/track. Press SKIP (.) twice briefly to step back to the previous chapter/track. SCAN (m / M) During playback, press
Summary of the content on the page No. 15
DVD VCD 1.1 ACD Notes on general features: Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed. The last scene remains in memory “PBC” on page 14). even if you remove the disc from the player or switch • If you press SKIP (>) once during Repeat Chapter off the player. If you load a disc that has the scene (Track) playback, the repeat playback cancels. memorized, t
Summary of the content on the page No. 16
ID3 TAG Playing an Audio CD or When playing a file containing information such as MP3/WMA file track titles, you can see the information by pressing DISPLAY. [ Song, Artist, Album, Comment, Genre ] This unit can play Audio CDs or MP3/WMA files. Tips: MP3/ WMA/ Audio CD • Press DVD MENU to move to the next page. Once you insert an MP3/WMA files recorded media or • On a DISC with MP3/WMA and JPEG file, you can Audio CD, a menu appears on the TV screen. switch MUSIC and PHOTO menu. Press TITLE, an
Summary of the content on the page No. 17
Repeat Programmed Tracks Programmed Playback Press REPEAT to select a desired repeat mode. The program function enables you to store your • Track: Repeats the current track. favorite tracks from any disc in the player memory. A program can contain 30 tracks. • All: Repeats all the tracks on programmed list. • Off(No display): Does not play repeatedly. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears. Note: E If you press SKIP (>) once during Repeat Track 2.
Summary of the content on the page No. 18
Moving to another file Viewing a JPEG file Press SKIP (. or >) or cursor (b or B) once This unit can play JPEG files. during viewing a picture to advance to the next or 1. Insert a JPEG files recording media. previous file. The PHOTO menu appears on the TV screen. Zoom During watching pictures, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b / B / v / V buttons. Rotating the picture Press v / V during showing a picture to rotate the picture clock
Summary of the content on the page No. 19
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. It start playing automatically. 2. The DVD-VR menu appears on the TV screen when you press DVD MENU buttons while playing. 3. Press v / V to select a track then press PLAY (N) or ENTER and playback starts. 4. Press DVD MENU to move to the list menu. Notes: • The slow motion function is not available. • This unit will play DVD-R/RW disc that
Summary of the content on the page No. 20
Reference Note: Remote Control Function If you change the batteries of the Remote Control with Remote Control C1/C2/C3 Code Switching C1 or C2 code, the remote control code is set to C3 This unit is initially set to C3 code (JVC DVD automatically. In this case, you should reset the PLAYER code). You can easily change the remote control code described above. Remote Control code to C1 (JVC VCR code), C2 (JVC DVD RECORDER code) or C3 as shown below. Maintenance and Service STANDBY/ON x Refer to the
