Summary of the content on the page No. 1
®
The company behind Avital Auto Security Systems
is Directed Electronics.
Since its inception, Directed Electronics has had one
purpose, to provide consumers with the finest vehicle
security and car stereo products and accessories
KEYLESS ENTRY SYSTEM
available. The recipient of nearly 100 patents and
Innovations Awards in the field of advanced electronic
technology.
Quality Directed Electronics products are sold and
serviced throughout North America and around
the world.
Call (800) 8
Summary of the content on the page No. 2
limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereafter the “unit”), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the
Summary of the content on the page No. 3
ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APP
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Summary of the content on the page No. 6
table of contents limited lifetime consumer warranty .........................................................................i remote configurations ............................................................................................. 2 LCD 2-way configuration .................................................................................... 2 standard 4-button configuration (both remotes)................................................... 4 LCD 2-way remote additional controls ......
Summary of the content on the page No. 7
remote configurations LCD 2-way configuration 4 3 2 1 31 30 29 AM 28 5 PM 27 6 A 26 7 8 25 SAVE 9 24 10 23 24 11 22 INHIBIT 12 21 13 20 14 19 15 16 17 18 © 2011 directed electronics—all rights reserved 2 2
Summary of the content on the page No. 8
1 Vehicle Interior Temperature Indicator 2 Numeric Display 3 AM/PM Indicator 4 Alarm Clock Mode Indicator 5 Timer Function Indicator 6 Transmit Range Indicator 7 Transmission Indication 8 Vibrate/Beep Mode Indicator 9 Power Saver Mode Indicator 10 Remote Start Timer Mode Indicator 11 No Function 12 Vehicle Page Mode Indicator 13 Full Trigger Shock Sensor Indicator 14 Hood/Trunk Open or Trigger Indicator 15 Parking Light Indicator 16 Door Open or Trigger Indicator 17 Arm/Lock Bu
Summary of the content on the page No. 9
standard 4-button configuration (both remotes) controls the Arm and Panic On/Off function. The arming is controlled by pressing this button. The panic alarm is triggered by pressing and holding this button. Press again to cancel the panic alarm controls the Disarm and Panic Off function. Press this button to disarm the system or to cancel the panic alarm. controls Silent Mode™ and Auxiliary channel 2 output. Silent mode works by pressing this button for less than
Summary of the content on the page No. 10
and pressed together control channel 4 output, and optional auxiliary convenience or expansion function that you have added to your system.. The auxiliary output controls __________________________. LCD 2-way remote additional controls note: The controls listed below are applicable only to the LCD 2-way remote. The LCD backlighting will turn on when pressed for less than one second; when held for more than five seconds the transceiver will enter adjustment mode allowing t
Summary of the content on the page No. 11
and Buttons When pressed simultaneously these buttons toggle between beep notification and vibrate notification. and Buttons When pressed simultaneously these buttons activate battery saver mode, which will drop power consumption on the trans- ceiver battery to zero when the alarm is inactive or disarmed. what is included • Control module • 544N transceiver/antenna • One 4-button remote • One 2-way LCD remote • Impact sensor on-board control module • H
Summary of the content on the page No. 12
important information Congratulations on the purchase of your state-of-the-art vehicle security system. This system has been designed to provide years of trouble-free operation. By carefully reading this guide prior to using your system, you will maximize the use of this product and its features. By carefully reading this Owner’s Guide prior to using your system, you will maximize the use of this system and its features. You can print additional or replacement copies of this manual by acc
Summary of the content on the page No. 13
To replace the battery, gently pull the battery cover release tab, then slide the door down to expose the battery and remove the expired battery. Place the new battery into the transceiver observing the correct polarity. When power is returned the transceiver will light all icons in the LCD and generate a musical tone. 4-Button Remote Battery Replacement Your remote is pow ered by a small, lightweight 3-volt lithium battery (CR2032) that will last approximately one year under normal use. W
Summary of the content on the page No. 14
7352 Series
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. © 2011 directed electronics—all rights reserved 9 9
Summary of the content on the page No. 15
Standard LCD 2-way icon configuration Icon The vehicle interior temperature icon has no functions Icon The numeric display icon will show the hours and minutes. Icon The AM/PM icon indicates the time before or after noon. Icon The alarm clock mode icon indicates that the alarm clock mode is active. Icon The timer function icon flashes during timed functions including parking timer. Icon The transmit range indicator icon stays visible as long as the system is within operating range. Ico
Summary of the content on the page No. 16
Icon The power saver mode can be turned on or off with the trans- ceiver. This icon displays the status. Icon The remote start timer mode icon has no function. Icon No function. Icon The vehicle page mode icon displays when the alarm module is paging the transceiver. Icon The full trigger shock sensor icon indicates that the shock sensor has been triggered by a hard shock. and Icons The hood/trunk open or trigger icon illuminates when the hood or trunk trigger has been activated or the
Summary of the content on the page No. 17
Icon The remote start icon has no function. Icon The Valet mode icon appears when the system is in Valet mode. Icon The remote start safety shut down icon has no function. Icon The battery level icon indicates the level of power remaining in the battery. Icon The temperature-controlled remote start icon has no function. Icon The silent arm/disarm icon appears when the system has been armed or disarmed in the silent mode. Icon The full trigger alert icon illuminates when the security sys
Summary of the content on the page No. 18
Standard LCD 2-way button functions Audible Function Button Icon indication Lamp On (10 sec) + Power-Saver Mode* Melody + Beep/Vibrate Mode 4 Vibrations/ 1 Beep Time Adjust for 5 Seconds 2 Beeps Mode (hour)** Time Adjust 1 Time*** Mode (min)** Alarm Clock 2 Times*** Set Mode (hour)** Alarm Clock 3 Times*** Set Mode (min)** Alarm Clock Music 4 Times*** 5 Selections o
Summary of the content on the page No. 19
Remote Start On 10 times*** 5 Selections Melody Selection 2 (where applicable) 1/2/3/4/5 + 10 Min Parking 1 Time Melody Count Down Mode + 20 Min Parking 2 Times Melody Count Down Mode + 30 Min Parking 3 Times Melody Count Down Mode + 60 Min Parking 4 Times Melody Count Down Mode + 90 Min Parking 5 Times Melody Count Down Mode + 120 Min Parking 6 Times Melody Count Down Mode + Parking
Summary of the content on the page No. 20
LCD 2-way remote operation The security system operates at 434 MHz and incorporates Directed’s proprietary A.S.K. out-board two-way transceiver. The high frequency combined with Binary Data communication achieves superior range with two-way communication. system signal paging features A page is the signal the control module sends to the transceiver as confirmation of receipt of a command or alarm system status. When the transceiver receives a page it will generate a page noti- fication to th
