Summary of the content on the page No. 1
DVD VIDEO PLAYER
DVP3040K
User manual
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
01-41_DVP3040K_93_engRC3 1 02/06/06, 11:24 AM
Summary of the content on the page No. 2
General Information Environmental Information Laser safety All unnecessary packaging has been This unit employs a laser. Due to possible omitted. The packaging has been made eye injury, only a qualified service person easy to separate into three materials: should remove the cover or attempt to cardboard (box), polystyrene foam service this device. (buffer) and polyethylene (bags, protective foam sheet). NOTE: PICTURES SHOWN MAYBE Your DVD player consists of materials DIFFERENT BETWEEN which can
Summary of the content on the page No. 3
Index English --------------------------------------- 6 -------------------------------- 42 This product incorporates copyright Manufactured under license from Dolby Manufactured under license from protection technology that is protected by Laboratories. “Dolby”, “Pro-Logic” and the Dolby Laboratories, "Dolby" method claims of certain U.S. patents and double-D symbol ar and the double-D symbol are e trademarks of trademarks of Dolby Laboratories. other intellectual property rights owned by Dolb
Summary of the content on the page No. 4
Specifications are subject to change without notice. Trademarks are the property of The apparatus shall not be exposed to dripping Koninklijke Philips Electronics N.V. or their or splashing and no objects filled with liquids, respective owners. such as vases, shall be placed on apparatus. For Customer Use: LASER Read carefully the information located at Type Semiconductor laser the rear of your DVD VIDEO player and GaAlAs enter below the Serial No. Retain this Wave length 650 nm (DVD) informatio
Summary of the content on the page No. 5
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan 8377 Avestan 6569 Kalaallisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575
Summary of the content on the page No. 6
English Contents Language ...................................................................... 5 Disc Operations Playable Discs ................................................. 19 Region Codes ................................................. 19 Introduction Playing discs ..................................................... 20 Supplied accessories ....................................... 8 Basic playback controls................................. 20 Cleaning discs .............................
Summary of the content on the page No. 7
Contents DVD Setup Menu Options General Setup menu ............................... 27-28 Locking/Unlocking the disc for viewing ... 27 Dimming player’s display panel .................. 27 Programming disc tracks .......................27-28 OSD Language ............................................... 28 Sleep ................................................................ 28 DivX(R) VOD registration code ............... 28 Audio Setup Menu ................................... 29-31 Analogue outp
Summary of the content on the page No. 8
English Introduction Supplied accessories Setup Finding a suitable location – Place the set on a flat, hard and stable Composite video surface. Do not place the set on a carpet. cable (yellow) – Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifier). – Do not put anything under the set (e.g., CDs, magazines). Audio cable – Install this system near the AC outlet (white, red) and where the AC power plug can be reached easily. Space for ventilation – P
Summary of the content on the page No. 9
Connections Connecting TV COMPONENT COMPONENT VIDEO IN VIDEO IN S-VIDEO S-VIDEO IN V (Pr/Cr) IN AUDIO V (Pr/Cr) AUDIO IN IN U (Pb/Cb) U (Pb/Cb) VIDEO IN VIDEO IN COMPONENT VIDEO IN Y S-VIDEO IN COMPONENT V (Pr/Cr) AUDIO IN S-VIDEO VIDEO IN Y U (Pb/Cb) IN V (Pr/Cr) AUDIO VIDEO IN IN Y VIDEO IN U (Pb/Cb) Y 1 2 1 2 IMPORTANT! IMPORTANT! – You only need to make one video – The progressive scan video connection from the following quality is only possible when using Y options, depending on the Pb Pr
Summary of the content on the page No. 10
English Connections Connecting the power cord RF coaxial cable to TV 2 Back of RF Modulator (example only) INT IN TO TV VIDEO AUDIO IN IN R L CH3 CH4 COMPONENT VIDEO IN S-VIDEO IN AUDIO V (Pr/Cr) OUT ~ AC MAINS U (Pb/Cb) VIDEO IN Y Antenna or Cable TV signal 1 After everything is connected IMPORTANT! – If your TV only has a single properly, plug in the AC power cord to the power outlet. Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF Never make or change any
Summary of the content on the page No. 11
Connections Optional: Connecting to a Multi- Optional: Connecting to a Stereo channel Receiver System STEREO AUDIO IN DIGITAL MULTICHANNEL AUDIO IN AV Receiver FRONT REAR CENTER RR LL FRONT REAR SUBW. Receiver has a Dolby Digital or DTS Stereo system has Dolby Pro Logic or Right / Left Audio In jack decoder 1 Select one of the video connections 1 Select one of the video connections (CVBS VIDEO IN or COMPONENT (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options VIDEO IN) depending on
Summary of the content on the page No. 12
English Connections Optional: Connecting Digital AV Receiver AV Receiver AUDIO IN DIGITAL Receiver has a PCM, Dolby Digital, or MPEG2 decoder 1 Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your TV. 2 Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). 3 Set the DVD player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (se
Summary of the content on the page No. 13
Functional Overview Front and Rear Panels STANDBY-ON B – Turns the player on or switches it to standby mode 9 STOP Disc tray – Stops playback OPEN/CLOSE / 2; PLAY/PAUSE – Starts or pauses playback – Opens or closes the disc tray IR Sensor Display – Shows the information about the current – Point the remote control towards this sensor status of the DVD Player LEVEL – Microphone volume control MIC – For connecting microphone Multichannel Audio Out Mains (AC Power Cord) – Center speaker, subwoofer,
Summary of the content on the page No. 14
English Functional Overview Remote Control B DISC MENU – Turns the player on or switches – Enters or exits the disc contents it to standby mode menu – Switches on or off the playback control mode (for VCD version DISPLAY 2.0 only) – Displays information on TV screen during playback RETURN / TITLE 1 2 – To go back to previous menu / show – Cursor buttons for moving to title menu the left or right, do a forward/ reverse search PREV ( J ) 3 4 – Skips to the previous title/chapter/ – Cursor buttons
Summary of the content on the page No. 15
Getting Started Step 2: Setting up the TV Step 1: Inserting batteries into the Remote Control IMPORTANT! Make sure you have completed all the necessary connections. (See pages 9-10 “Connecting TV”). 1 Turn on the TV and set to the correct video-in channel. You should see the DVD background screen on the TV. 2 Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your 1 Open the battery compartment. TV manual for more details. 2 Insert
Summary of the content on the page No. 16
English Getting Started Setting up Progressive Scan feature ACTIVATING PROGRESSIVE SCAN: 1. ENSURE YOUR TV HAS PROGRESSIVE SCAN. (for Progressive Scan TV only) 2. CONNECT USING YPBPR (GBR) VIDEO CABLE. 3. IF THERE IS A DISTORTED PICTURE, WAIT 15 SECONDS FOR AUTO RECOVERY. The progressive scan display twice as OK Cancel many frames per second as interlaced scanning (ordinary normal TV system). With nearly double the number of lines, 8 Press 1 to highlight OK in the menu progressive scan offer
Summary of the content on the page No. 17
Getting Started 5 Select an item and press OK. Selecting the colour system that ➜ Follow the instructions shown on the corresponds to your TV TV to confirm the selection (if any). This DVD player is compatible with both Helpful Hints: NTSC and PAL. In order for a DVD disc – Before changing the current TV to play on this player, the colour system of Standard setting, ensure that your TV the Disc, the TV and the DVD player supports the ‘selected TV Type’ system. should match. – If there is no prop
Summary of the content on the page No. 18
English Getting Started Step 3: Setting language Setting the Audio, Subtitle and Disc menu language preference You can choose your own preferred The language options are different language or soundtrack from audio, depending on your country or region. It subtitles and disc menu languages. If the may not correspond to the illustrations language selected is not available on the shown on the user manual. disc, the disc’s default language will be used instead. Setting the OSD Language The On-screen
Summary of the content on the page No. 19
Disc Operations IMPORTANT! Region Codes – If the inhibit icon (ø) appears on This DVD player is designed to support the TV screen when a button is the Region Management System. Check pressed, it means the function is not the regional code number on the disc available on the current disc or at package. If the number does not match the current time. the player’s region number (see table – Depending on the DVD or VIDEO below), the player may be unable to CD, some operations may be playback the disc
Summary of the content on the page No. 20
English Disc Operations Selecting track/chapter Playing discs Press PREV J / NEXT K to go to the 1 Connect the power cords of the DVD previous or next track/chapter. player and TV (and any optional stereo or In STOP mode, press DISPLAY to AV receiver) to a power outlet. display the disc information text line for 2 Turn on the TV power and set to the title/chapter/track (example - 00/08). correct Video In channel. (See page 15 Use alphanumeric keypad (0-9) to “Setting up the TV”). enter va
