Philips MCD703/98 user manual

Summary of the content on the page No. 1

1
Quick Start Guide
2
User Manual
MCD703
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
Remote control with two
Composite Video Cable
Control Cable
AAA batteries
AA batteries
FM antenna
Quick start guide User Manual
MW antenna
MCD703 QUG_Eng 1 2006.2.22, 13:57

Summary of the content on the page No. 2

1 Connect the speaker cables. 2 Connect the MW and FM antennas. Tip – See the User Manual for other TV 3 connection options. Connect the control cable. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed 4 setup. Connect the composite video cable to a TV. 5 Connect the power cords of the system and TV. AC power 5 1 FM antenna MW antenna 2 Speaker Speaker (left) (right) 4 1 1 3 5 AC power cord Setting up the TV 1 Press SOURCE (DISC on the remo

Summary of the content on the page No. 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME +/- on the system or press VOLUME +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME +/- on the system or press VOLUME +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressi

Summary of the content on the page No. 4

Playing a disc 1 Press OPEN•CLOSE (0 on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not press PLAY/PAUSEÉÅ. 3 To stop playback, press BAND/9 (9 on the remote). Tip Notes for remote control: – Detailed playback features and additional – First, select the source you wish to control functions are described in the accompany by pressing one of