Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
The remote control MONITOR Monitor: This button lets you switch between the TV receiver (internal tuner) in the DVD recorder (TV picture on the TV set) and playback on the DVD recorder. STANDBYm Switch on or off: To switch set on or off, interrupt menu function, interrupt a programmed recording (TIMER) TV/DVD TV/DVD switch: Switches the scart socket EXT 2 AUX-I/O directly to the TV set. This lets you watch the picture from any unit connected to this scart socket (set-top box', video recorder or
Summary of the content on the page No. 4
N Select previous title/search backwards : Briefly press the button during playback: Previous chapter/film or previous title Hold down the button: Search backwards Hold down button during still picture, slow motion backwards O Select next title/search forwards : Briefly press the button during playback: Next chapter/film or next title Hold down the button: Search forwards Hold down button during still picture, slow motion forwards STOPh Stop: Stop playback/recording, except with programmed recor
Summary of the content on the page No. 5
Front of the device STANDBY/ONm Switch on or off: To switch off or on, interrupt a function, interrupt a programmed recording (TIMER) OPEN/CLOSEJ Open/close disc tray: Open/close disc tray RECORD Record: Record the current TV channel G Playback: To play a recorded disc N Select previous title/search backwards O Select next title/search forwards h Stop: Interrupt playback/recording Behind the flap at the right hand corner on the front S-VIDEO S Video socket: Connection of SVHS/Hi8 camcorders or S
Summary of the content on the page No. 6
Back of the unit 4MAINS Mains socket: Connection to the mains supply (230V/50Hz) ANTENNA IN Aerialinput : Connection of the aerial TV OUT Aerialoutput : Connection of the TV set EXT 2 AUX-I/O Scart socket 2: Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.) EXT 1 TO TV-I/O Scart socket 1: Connection of a TV set. RGB output Output sockets (AUDIO/VIDEO OUT) OUT S-VIDEO (Y/C) S Video output: Connection of an S-Video-compatible TV set OUT VIDEO Vid
Summary of the content on the page No. 7
IIIIIIIIIIIIIII Disc bar: Displays the current position on the disc (disc pointer). Play/Record: Single flashing segment at the current position. Pause: Flashing segment on both sides of the current position. Stop: Illuminated segment at the current position. SAT A satellite recording has been programmed. TIMER A recording (timer) has been programmed o((( A remote control signal has been received VPS/PDC Video programming system / programme delivery control: A VPS or PDC code will be transmitted
Summary of the content on the page No. 8
The disc inserted is either new or has been completely erased (no recordings). The disc is protected against recording. The maximum number of titles per disc has been reached. The maximum number of titles per disc is 48. The maximum number of chapters per title/disc has been reached. The maximum number of chapters per title is 124. The disc is full. There is no space for new recordings A disc with PAL recordings has been inserted. The mac
Summary of the content on the page No. 9
Table of contents AIntroduction .................................... 3 Fplayback ......................................... 35 Dear Philips customer, .................................................................................... 3 General notes on playback ........................................................................... 35 Regional code .................................................................................................... 6 Inserting a disc .........................
Summary of the content on the page No. 10
JProgramming a recording (TIMER) .............................................. 62 General ............................................................................................................. 62 ® Programming recordings with the ShowView System ......................... 63 ® Programming recordings without the ShowView System ................... 65 How to change or delete a programmed recording (TIMER) ............. 66 'NexTView Link' .....................................................
Summary of the content on the page No. 11
AIntroduction Dear Philips customer, Instruction manuals are usually very dry since they are technically-oriented and often poorly translated. I have therefore been employed by Philips to help you. Allow me to introduce myself. My name is Phil. I will be guiding you through the instruction manual and helping you get to know your new DVD recorder. At appropriate points along the way, I will be providing you with the following information: Question: (?) Tip Problem Here I will be explaining Here I
Summary of the content on the page No. 12
Welcome to the growing family of owners of PHILIPS equipment. Thank you for buying a DVDR 75/001-75/021 . Please take the time to read this operating manual before using your DVD recorder. It contains important information on how to set up and operate the machine. The video recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the machine. The DVD recorder needs
Summary of the content on the page No. 13
Discs you can use The following discs can be used in your DVD recorder for playback and recording: Playback and recording DVD+RW (Digital Versatile Disc + rewritable) DVD+R (Digital Versatile Disc + Recordable) Playback only: DVD Video (Digital Versatile Disc) DVD-R (DVD-Recordable) DVD-RW (DVD-Rewritable) These discs can only be played back if the recording was made in video mode and the recording was finalised. Audio CD (Compact Disc Digital Audio) Super Audio CD (Only plays the CD layer of a
Summary of the content on the page No. 14
Regionalcode Since DVD films are not normally released in all parts of the world at the same time, all DVD players have a specific regional code. Discs can be given a regional code. If the regional codes differ between the player and the disc, playback is not possible. DVDs must be marked 'ALL' for all regions or '2' for region 2 to work in this machine. If the DVD is marked with a different region, it cannot be played in this DVD recorder. The number within the globe represents the region. Regi
Summary of the content on the page No. 15
Important Caution: Visible and invisible laser radiation. If the cover is open, do not look at the beam. Because of the risk of eye injuries, only qualified service engineers should open the machine and carry out maintenance or repair work. LASER Type: Semiconductor lasers InGaAlP (DVD), AlGaAs(CD) Wavelength: 660nm (DVD), 780nm (CD) Output power (outside the lens): 20mW (DVD+RW write), 0.8mW (DVD read), 0.3mW (CD read). Beam divergence: 82 degrees (DVD), 54 degrees (CD) Danger. High voltage! Do
Summary of the content on the page No. 16
When installing the recorder in a cupboard ensure there is a gap of approximately 2.5 cm (1 inch) around the recorder to enable air to circulate freely and prevent overheating. Make sure that air can circulate freely through the ventilation slots on the machine. The machine should be placed on a firm surface. Make sure that no objects or liquids enter the video recorder. Do not place vases or similar on the DVD recorder. If you spill liquid in the recorder, immediately disconnect it from the pow
Summary of the content on the page No. 17
Specialfunctionsof your DVD recorder Your PhilipsDVD recorder has a number of special functions to make it easier to use and to enhance your enjoyment. Philips provides the best possible connection between your DVD recorder and other home cinema equipment. The DVD recorder is controlled by external devices (receivers, TV sets and so on) via Cinema Link and is automatically set to the right system settings. This function automatically transfers all the television channel settings onto your DVD re
Summary of the content on the page No. 18
Dolby Laboratories standard for transmitting 5.1 channels. Five full-value channels are transmitted in this acoustic playback system. A further channel is used for low frequencies (effects). The loudspeakers are arranged front left, front middle, front right, rear left and rear right. This system is currently the most common system and is used in cinemas. With this DVD recorder each soundtrack in 2-channel Dolby Digital is recorded onto a DVD+RW. Manufactured under license from Dolby Laboratorie
Summary of the content on the page No. 19
BConnecting the DVD recorder Preparingthe remotecontrolfor operation The remote control and its batteries are packed separately in the original DVD recorder packaging. You must install the batteries in the remote control before use - described in the following section. 1 Take the remote control and the enclosed batteries (2 batteries). 2 Open the battery compartment, insert the batteries as shown and then close the battery compartment. The remote control is now ready to use. Its range is approxi
Summary of the content on the page No. 20
When you install your DVD recorder for the first time, select one of the following options: 'Connecting with a scart cable and Easy Link' If your TV set is equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link, Megalogic, Datalogic, ...' and you wish to use a scart cable. 'Connecting with a scart cable without Easy Link' If your TV set is not equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link, Megalogic, Datalogic, ...' and you wish to use a scart cable.
