Summary of the content on the page No. 1
DVD Player & Recorder
DVR-0800
Operation Manual
- 1 -
Summary of the content on the page No. 2
Table of contents Important Safety Instructions……………………………………………………………………………………… 3 About this manual……………………………………………………………………………………………… 4 ……… This player supports the following Media Formats……………………………………………………………………. 4 Important Note……………………………………………………………………………………………………………… 4 Copyright Information…………………………………………………………………………………………………… 4 Regional Management Information……………………………………………………………………………………… 4 Features………………………………………………………………………………………………………………… 5 Before you Switch On……
Summary of the content on the page No. 3
Important Safety Instructions Read these instructions. All the safety and operating instructions should be read before the equipment is operated. Keep these instructions. The safety and operating instructions should be retained for future reference. Heed all warnings. All warnings on the equipment and in the operating instructions should be adhered to. Follow all instructions. All operating and use instructions should be followed. Do not use this unit near water. For example, ne
Summary of the content on the page No. 4
About this manual The operation described here mainly refers to the use of the remote control handset (R/C). Buttons with same or similar marking at the main unit have the same function like those of the R/C. This player supports the following Media Formats: DVD-Video CD-R CD-RW CD Audio Photo CD DVD+RW DVD+R MP3 Important Note: This unit plays CD-R, CD-RW and MP3 disks, although CD-R and CD-RW media will not be indicated in the display. But
Summary of the content on the page No. 5
Features INTRODUCTION Timer programming feature Thank you for buying this Polaroid DVD Recorder. The following timer programming features are We hope you enjoy this quality unit with its fantastic supported for both DVD+RW/+R features and easy playback/recording operation. Program recording of shows –program the With it, you can watch DVDs, music disks, or watch unit to record an upcoming show by selecting TV shows from external source devices. The most channel, date, start time, end
Summary of the content on the page No. 6
Before You Switch On Place in Position Using the Remote Control Choose a location with sufficient air circulation to 1. Open the battery compartment that prevent overheating. Do not expose the unit to direct is found on the backside of the remote. sunlight or other heat sources. The product must be positioned horizontally. Do not put any heavy objects on its housing. Protect the laser unit against dust and if necessary, use a cleansing disk carefully following
Summary of the content on the page No. 7
Elements of Operation - Front Panel -Press to turn on/off the power. 1. POWER button -Use to load disk. 2. Disk tray -Connection for a video output. 3. VIDEO input jack(CVBS2) -Connections for audio output. 4. L-AUDIO-R input jacks -Receiving the signal from the remote control. 5. Remote sensor -Indicates the current status of the unit. 6. Display panel -Press to open/close the disk tray. 7. EJECT button -Press to begin the play
Summary of the content on the page No. 8
Rear Panel 1. TV TUNER jack 7. S-VIDEO output jack 2. VIDEO input jack (CVBS1) 8. Component video output jacks 9. Optical Digital output jack 3. 2ch Audio input jack 10. Coaxial Digital output jack 4. 5.1ch Audio output jacks 5. VIDEO output jack 11. Power-supply cord 6. S-VIDEO input jack - 8 -
Summary of the content on the page No. 9
The Remote Control Handset (R/C) 1 Recording start button. REC 2 TV/AV Press to shift between CVBS1, CVBS2, S-VIDEO and RF. 3 Switch between stand-by and working status. POWER 4 Press to search backward. 5 Arrow select. (OSD navigation buttons) Press / to tune the effect of the reception. Press to advance to the next channel or to go back to the preceding channel. 6 Press to confirm the selection. ENTER 7 Press to skip to the previou
Summary of the content on the page No. 10
- 10 -
Summary of the content on the page No. 11
Connections Connecting to a TV Important Note: - Not all cables shown below are included with this DVD player. - Turning off the power to all equipment involved before making any connections will protect your speakers from possible damage. 1. Connecting to your TV will give you an Analog Audio Connection: Using the supplied audio cables, connect the AUDIO OUT jacks (LEFT/RIGHT) on the DVD Player with the AUDIO IN jacks (LEF
Summary of the content on the page No. 12
Connections Analog Audio Connection Using your choice of analog video, S-video, or Component video connection (see page 11), you also have the option to connect your DVD player to your stereo system for incredible stereo sound. Use the audio connection described below: 1. Standard Analog Audio Connection: Using the supplied audio cable, connect the AUDIO OUT jacks (LEFT/RIGHT) on the DVD Player with the AUDIO IN (LEFT/RIGHT) jacks on your ampli
Summary of the content on the page No. 13
Connections Digital Audio Connection Using your choice of analog video, S-video, or Component video connection (see page 11), you also have two Digital Audio options when connecting your DVD player to your stereo system. It is widely debated which connection (Optical or Coaxial) gives you better performance. However, either connection will give you superior sound. Use the connections described below: 1. Optical Audio Connection: Using an optical audio cable (not included), connect the OP
Summary of the content on the page No. 14
Connections Connecting to Audio/video Sources This DVD player supports two-channel video input and two groups of audio input (one set of each is on the front panel, the other set of each is on the rear panel) for connecting a camcorder. Use these connections for connecting a camcorder. Note: Most prerecorded videocassettes and DVDs are copy protected. If you try to copy them with the DVD recorder, the Recorder displ
Summary of the content on the page No. 15
The DVR Setup Menu Installation: The DVD-Recorder is equipped with a Auto-Channel Scan TV tuner making it possible for you to watch TV or 1. After you’ve selected the setup menu, return to record your favorite shows to DVD for later playback. the Recording Setup menu and select the Channel Setup function. Select Auto CH Scan option and 1. Connect your cable TV or antenna to the TUNER press the Enter button on the remote control so that input jack found on the back of the DV
Summary of the content on the page No. 16
The DVR Setup Menu Setting The Clock 1. In order for the DVD-Recorder to record using a TV / Media Playback Display programmed setting, the internal clock must be set 1. From the Setup Menu go to the Video Setup to the correct time. Use the Set Clock function in the option and select the desired TV display mode you Recording Setup menu to set the internal clock of want to use during playback of your recording using the DVD-Recorder. the TV Display function. The DV
Summary of the content on the page No. 17
The DVR Setup Menu Speaker Setup (Stereo Mode) Speaker Setup (Multi-Channel Mode) 1. The DVD-Recorder is 6-channel DVD-Audio 1. This DVD-Recorder is 6-channel DVD-Audio capable, provided a home theater audio receiver is capable (requires a home theater audio receiver). If present. If you are not hooking up the you are connecting the DVD-Recorder to a home DVD-Recorder to a home theater audio receiver, the theater audio receiver, refer to the owner’s manual 6 (5.1) audio channels will b
Summary of the content on the page No. 18
The DVR Setup Menu 2. While remaining in the Speaker Setup function, Center Delay function (Default=0-5ms): Increasing use the arrow buttons on the remote control to select or decreasing the delay setting in milliseconds the amount of center and rear speaker delay desired. changes the virtual distance between the center Press the Enter button on the remote control to speaker and the listener. The resulting effect, establish the final delay distance. together with modifications to the rear
Summary of the content on the page No. 19
The DVR Setup Menu Audio Setup Dolby ProLogic Setup 1. The Audio Setup menu is directly below the Dolby The Dolby ProLogic feature is a Dolby surround sound audio format that can enhance standard menu. Press ENTER to access the Audio Setup menu. 2-channel stereo program material. The Audio Setup menu allows you to access the 1. Use the arrow keys on the remote to select the Digital Out, Dynamic Compress, and ProLogic functions. ProLogic function, and to turn the function on and Digita
Summary of the content on the page No. 20
DVD+RW/DVD+R Disk Recording Starting The Recording Session 1. The quality of the recording to a DVD+RW/+R disc Note: Most prerecorded videocassettes and DVDs directly depends on the selection of the recording are copy protected. If you try to copy them with the mode. Decide on the quality of the recording you DVD recorder, the Recorder display may show want, taking into account the amount of the playback “COPY PROTECT”. time each recording mode requires. Selecting Best, for example, mea
